Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > INTERESTS AND ACTIVITIES > Gunsmithing & How To
Register FAQ Members List Calendar Mark Forums Read

Gunsmithing & How To Pro, Amateur & WECSOG and Tutorials, Guides & OLL Build Instructions

Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2012, 11:52 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default Remington 870 wood birdshead grip( update final product)

I cut down a Remington 870 wood stock to make a birdshead grip, now I'm not sure how to mount it. The bolt it came with is way to long and since cutting the stock the hole in the grip for the screw is to small for the washer to go into. I'll get some pictures of it up soon. Anyone have any ideas how to go about mounting to the receiver?


__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"

Last edited by Nicoman; 01-23-2013 at 2:48 PM..
Reply With Quote
  #2  
Old 10-10-2012, 6:42 AM
-hanko's Avatar
-hanko -hanko is offline
Calguns Addict
 
Join Date: Jul 2002
Location: Bay Area & SW Idaho
Posts: 9,111
iTrader: 5 / 100%
Default

Quote:
Originally Posted by nicoman View Post
I cut down a Remington 870 wood stock to make a birdshead grip, now I'm not sure how to mount it. The bolt it came with is way to long and since cutting the stock the hole in the grip for the screw is to small for the washer to go into. I'll get some pictures of it up soon. Anyone have any ideas how to go about mounting to the receiver?
Counterbore the stock to fit the washer and an allen bolt of the correct length...or maybe countersink the hole to take a flathead allen?

ETA...Cancel the flathead idea...too much chance to split the grip if tightened too much.

You could also get a piece of threaded rod to fit the gun, countersink the stock, and use a black-finished acorn nut for attachment...

Pics of the finished grip would be super

hth

-hanko
__________________
"Tactical" is like boobs...you can sell anything with it....arf

I never once felt out of place or that people were intolerant...but then again, I didn't ask any dumbass questions ...saxman

“Heaven goes by favor. If it went by merit, you would stay out and your dog would go in.”
Mark Twain

Last edited by -hanko; 10-10-2012 at 8:21 AM..
Reply With Quote
  #3  
Old 10-11-2012, 11:01 AM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

^^ Thanks for the reply I'll get a picture of the grip up tonight after work.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #4  
Old 10-11-2012, 1:00 PM
kcstott's Avatar
kcstott kcstott is offline
Toolmaker Extraordinaire
CGN Contributor
 
Join Date: Nov 2011
Location: National City Socal
Posts: 7,633
iTrader: 9 / 100%
Default

Yep counter bore the stock for a washer and a SHCS and call it good.
__________________
Quote:
Originally Posted by ar15barrels View Post
Dick.
The above statement i consider a term of endearment
Need prints for your build? Need reference materials for Gunsmithing projects, Click Here
I fear that even though as tough as life has been for me I have only begun to pay for my sins.
PSL BARRELS MACHINED TO ORDER PM FOR QUOTE
Don't forget to have your Liberals spayed or neutered !
Reply With Quote
  #5  
Old 10-12-2012, 2:33 AM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Here's a few pictures it's not done yet. Do I need to use the factory washer or can I get a smaller one, the factory looks like the hole would need to be way to big for the grip.

it's not great I only had a old hack saw and a dremel to do the work with


this is the factory washer, hole looks to be countersunk already but its not
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"

Last edited by Nicoman; 10-20-2012 at 5:27 PM..
Reply With Quote
  #6  
Old 10-12-2012, 7:29 AM
kcstott's Avatar
kcstott kcstott is offline
Toolmaker Extraordinaire
CGN Contributor
 
Join Date: Nov 2011
Location: National City Socal
Posts: 7,633
iTrader: 9 / 100%
Default

You can use what ever will fit. Or you can make something that will fit.
__________________
Quote:
Originally Posted by ar15barrels View Post
Dick.
The above statement i consider a term of endearment
Need prints for your build? Need reference materials for Gunsmithing projects, Click Here
I fear that even though as tough as life has been for me I have only begun to pay for my sins.
PSL BARRELS MACHINED TO ORDER PM FOR QUOTE
Don't forget to have your Liberals spayed or neutered !
Reply With Quote
  #7  
Old 10-20-2012, 2:36 AM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

I've stripped all the finish off the grip and forend and getting ready to refinish them, but when it comes to Counter boring I'm concerned with the lack of "meat" at the top of the hole. this is where I need some help at you guys have any ideas how to solve this
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #8  
Old 10-20-2012, 6:48 AM
-hanko's Avatar
-hanko -hanko is offline
Calguns Addict
 
Join Date: Jul 2002
Location: Bay Area & SW Idaho
Posts: 9,111
iTrader: 5 / 100%
Default

Quote:
Originally Posted by nicoman View Post
I've stripped all the finish off the grip and forend and getting ready to refinish them, but when it comes to Counter boring I'm concerned with the lack of "meat" at the top of the hole. this is where I need some help at you guys have any ideas how to solve this
I would use a drill press and a Forstner (sp?) bit...the Forstner locates itself by its outside diameter...normal drills locate by their centers.

I like the idea of a metal bushing epoxied for strength. You can use any washer you want, obviously fitted to the bolt or threaded rod, and the screw or nut diameter you need.

Nice work so far.

-hanko
__________________
"Tactical" is like boobs...you can sell anything with it....arf

I never once felt out of place or that people were intolerant...but then again, I didn't ask any dumbass questions ...saxman

“Heaven goes by favor. If it went by merit, you would stay out and your dog would go in.”
Mark Twain
Reply With Quote
  #9  
Old 10-20-2012, 3:03 AM
6mmintl's Avatar
6mmintl 6mmintl is offline
Veteran Member
 
Join Date: Apr 2008
Location: Free land, Star Idaho.
Posts: 4,481
iTrader: 51 / 98%
Default

Aluminum tube spacer epoxied in place.
Reply With Quote
  #10  
Old 10-20-2012, 5:23 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by 6mmintl View Post
Aluminum tube spacer epoxied in place.
I like this idea I've been trying it with wood doweling but every time I sand it to fit the grip hole I end up with a tapper and one end is loss. Maybe aluminum is the way to go, what would I use to bond it to the wood?
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #11  
Old 10-20-2012, 5:40 PM
kcstott's Avatar
kcstott kcstott is offline
Toolmaker Extraordinaire
CGN Contributor
 
Join Date: Nov 2011
Location: National City Socal
Posts: 7,633
iTrader: 9 / 100%
Default

Plain old epoxy. preferably the 24 hour stuff. But in a pinch 1 hour stuff would work as well.
__________________
Quote:
Originally Posted by ar15barrels View Post
Dick.
The above statement i consider a term of endearment
Need prints for your build? Need reference materials for Gunsmithing projects, Click Here
I fear that even though as tough as life has been for me I have only begun to pay for my sins.
PSL BARRELS MACHINED TO ORDER PM FOR QUOTE
Don't forget to have your Liberals spayed or neutered !
Reply With Quote
  #12  
Old 10-20-2012, 5:45 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by kcstott View Post
Plain old epoxy. preferably the 24 hour stuff. But in a pinch 1 hour stuff would work as well.
Time is not an issue this is going on the Remington 870 AOW I'm waiting on.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #13  
Old 10-23-2012, 11:35 AM
Quickdraw Mcgraw's Avatar
Quickdraw Mcgraw Quickdraw Mcgraw is offline
Senior Member
 
Join Date: Jun 2009
Location: Sonoma County
Posts: 714
iTrader: 2 / 100%
Default

Quote:
Originally Posted by nicoman View Post
Time is not an issue this is going on the Remington 870 AOW I'm waiting on.
Be sure to POST SOME PICS!! Cause thats gonna be awsome!
__________________
‘‘It is not the function of our government to keep the citizen from falling into error; it is the function of the citizen to keep the government from falling into error.’’

— Justice Robert H. Jackson
Reply With Quote
  #14  
Old 10-20-2012, 5:50 PM
kcstott's Avatar
kcstott kcstott is offline
Toolmaker Extraordinaire
CGN Contributor
 
Join Date: Nov 2011
Location: National City Socal
Posts: 7,633
iTrader: 9 / 100%
Default

Slower cure makes for a stronger resin so get the slow stuff or if you really want it in there get some Brownell's Acra glass or some marine tex. Same 24 hour cure but strong as Iron.
__________________
Quote:
Originally Posted by ar15barrels View Post
Dick.
The above statement i consider a term of endearment
Need prints for your build? Need reference materials for Gunsmithing projects, Click Here
I fear that even though as tough as life has been for me I have only begun to pay for my sins.
PSL BARRELS MACHINED TO ORDER PM FOR QUOTE
Don't forget to have your Liberals spayed or neutered !
Reply With Quote
  #15  
Old 10-20-2012, 10:27 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by kcstott View Post
Slower cure makes for a stronger resin so get the slow stuff or if you really want it in there get some Brownell's Acra glass or some marine tex. Same 24 hour cure but strong as Iron.
Cool thanks again, I think I'm gonna go with the marine tex. I got a wood doweling to size with a hole drilled through it. I seen marine tex can be sanded so I can make a pocket for the receiver stud since I'm not sure how long it will be.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #16  
Old 10-25-2012, 6:31 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

got it refinished to day still need to epoxy in the wood doweling

__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #17  
Old 01-05-2013, 3:54 PM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

Did you ever get this thing done?

I just cut mine and now I'm in the same spot of trying to figure out what to epoxy in there to run the screw through.
Reply With Quote
  #18  
Old 01-05-2013, 3:55 PM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

I took a few pics.











Last edited by STF; 01-05-2013 at 4:07 PM..
Reply With Quote
  #19  
Old 01-05-2013, 4:03 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by STF View Post
Did you ever get this thing done?

I just cut mine and now I'm in the same spot of trying to figure out what to epoxy in there to run the screw through.

I glued in a wood doweling that I drilled a hole through, got a new screw from home depot. still waiting on my 870 AOW thats why I haven't posted pictures yet.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #20  
Old 01-05-2013, 4:04 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by STF View Post
Did you ever get this thing done?

I just cut mine and now I'm in the same spot of trying to figure out what to epoxy in there to run the screw through.

I glued in a wood doweling that I drilled a hole through, got a new screw from home depot. still waiting on my 870 AOW thats why I haven't posted pictures yet.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #21  
Old 01-05-2013, 4:10 PM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default


Reply With Quote
  #22  
Old 01-10-2013, 8:54 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

A little more progress here.

Got the new shotgun the other night and put the 18" barrel and mocked the birdshead grip on it.



Reply With Quote
  #23  
Old 01-10-2013, 9:08 AM
mydogsmonkey's Avatar
mydogsmonkey mydogsmonkey is offline
Veteran Member
 
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,887
iTrader: 186 / 100%
Default

sweet looking piece
Reply With Quote
  #24  
Old 01-10-2013, 9:19 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

Thanks,
Reply With Quote
  #25  
Old 01-11-2013, 7:12 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

More work.










Reply With Quote
  #26  
Old 01-11-2013, 5:06 PM
BigfootHunter's Avatar
BigfootHunter BigfootHunter is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Sep 2009
Posts: 775
iTrader: 1 / 100%
Default

looking really good! I think the wood with the magpul sling mount is rad, but wouldn't it bite your hand? Likewise with the long shell holder. I put an 8 rounder on my Mossberg (with a regular stock) and it JUST clears if I grip it a certain way.

I'm not sure if I have the guts to do it, but I wonder what one of those Magpul stocks cut down (like your wood one is) would look like. I'm considering it after seeing how good someone's AOW looked with the Magpul forend on it, instead of a speedfeed bird head grip. Lotta $$$ to experiment with though, and I couldn't find anyone else that had done it. I've never looked at the inside of the Magpuls so I'm not even sure if it's feasible. Now if I could only find one with some damage I wouldn't feel so bad about hacking away.

Anyway, sorry for the mini-thread-jack. Looks great, keep up the good work!
__________________
Reply With Quote
  #27  
Old 01-11-2013, 11:51 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

the magpul sling mount looks KILLER on there. I was thinking about doing it to mine also, may have to now. I pick up my 870 AOW on the 23rd so I'll be able to finally post some pictures of it.
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #28  
Old 01-12-2013, 7:12 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

I'll be honest on the magpul sling mount. I wish it pointed the other direction with the way it feels on my hand. I'll have to see when I actually shoot it.

On their website they show it mounted both ways but it's just not possible.

Nicoman, I'll get that measurement for you later today.
Reply With Quote
  #29  
Old 02-16-2013, 4:10 PM
Dozen Gauge's Avatar
Dozen Gauge Dozen Gauge is offline
Member
 
Join Date: Feb 2011
Location: Central Coast
Posts: 178
iTrader: 0 / 0%
Default

You might be able to make a plug to cover the grips bolt hole if you can find a hardwood dowel the diameter of the hole. Cut a length long enough to entend into the grip about 3/8 to 1/2" and extend out far enough to clear the entire hole. Drill a small hole down the center of that short dowel and insert into the grip. Sand the dowel down to the contour of the grip. The smaller center hole allows you to insert a small hooked awl into the plug and pull it out when needed. Ideally, if you still have the remainder of the stock you would use a plug cutter of the correct size to cut the dowel. Then it would match the rest of the grip when staining.
thumbs:

Last edited by Dozen Gauge; 02-16-2013 at 4:14 PM..
Reply With Quote
  #30  
Old 01-12-2013, 7:13 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

I'm also not sold on the 7 shot shell holder. it looks and feels kind of bulky and thats without shells in it. I might just put a 4 shot one on there? I can't decide.
Reply With Quote
  #31  
Old 01-13-2013, 12:35 PM
BRUNO1911's Avatar
BRUNO1911 BRUNO1911 is offline
Senior Member
 
Join Date: Oct 2005
Location: LEFTCOAST KALIFORNIA
Posts: 513
iTrader: 82 / 100%
Thumbs up

"Outstanding jobs!" Gents

I've been doing Bird's Head PG for sometime now
Here is a quick photo of 4 PG projects







Left to Right/Top to Bottom
Winchester Model 1897 pump take down model .12ga
Remington Model 11/.12ga semiautomatic
Remington 870/.12ga pump
Mossberg 500 ATP/.12ga pump

I designed and did all the work on them.

Be safe!
Reply With Quote
  #32  
Old 01-13-2013, 4:12 PM
gnlvrjustin's Avatar
gnlvrjustin gnlvrjustin is offline
Member
 
Join Date: Oct 2011
Location: CENTRAL CALI
Posts: 219
iTrader: 10 / 100%
Default

Wow just beautiful work I have to have a set. pm Inbound
__________________
"HOLD FAST"
Reply With Quote
  #33  
Old 01-14-2013, 10:35 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

Not anything special this weekend. I finally got the wood dowel done at work on Friday and epoxied it in on Saturday night.

On Sunday I went to the hardware store to get a shorter bolt/screw to hold the birdshead grip but they didn't have anything the length I needed. It was a 1/4-28 screw and I had a die at home so I just cut the original stock screw down and re threaded it.









Probably threaded longer than it needed to be but it won't hurt anything


Reply With Quote
  #34  
Old 01-14-2013, 11:15 PM
ElToro's Avatar
ElToro ElToro is offline
Senior Member
 
Join Date: Nov 2003
Location: Bay Area PRK
Posts: 714
iTrader: 32 / 100%
Default

good work. need to put that on an AOW.

hows the birdshead on the A5 shoot ?
Reply With Quote
  #35  
Old 01-16-2013, 12:12 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

Quote:
Originally Posted by ElToro View Post
good work. need to put that on an AOW.
I pick up my 870 AOW on the 23rd I'll post some pictures
__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
  #36  
Old 01-16-2013, 12:04 PM
wpage's Avatar
wpage wpage is offline
Senior Member
 
Join Date: Jan 2011
Posts: 2,128
iTrader: 0 / 0%
Default

Well done!
__________________
God so loved the world He gave His only Son... Believe in Him and have everlasting life.
John 3:16

United Air Epic Fail Video https://www.youtube.com/watch?v=u99Q7pNAjvg
Reply With Quote
  #37  
Old 01-17-2013, 8:33 AM
STF STF is offline
Junior Member
 
Join Date: Mar 2012
Posts: 17
iTrader: 0 / 0%
Default

Quote:
Originally Posted by wpage View Post
Well done!
Thank you sir.
Reply With Quote
  #38  
Old 01-16-2013, 12:21 PM
BigfootHunter's Avatar
BigfootHunter BigfootHunter is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Sep 2009
Posts: 775
iTrader: 1 / 100%
Default

Sweet, can't wait to see it.
__________________
Reply With Quote
  #39  
Old 01-17-2013, 11:05 AM
4thSBCT 4thSBCT is offline
Banned
 
Join Date: Mar 2009
Posts: 2,056
iTrader: 37 / 100%
Default

Those are some neat trench guns
Reply With Quote
  #40  
Old 01-23-2013, 2:48 PM
Nicoman's Avatar
Nicoman Nicoman is offline
Guardian of masculinity
CGN Contributor - Lifetime
 
Join Date: Jul 2010
Location: Meridian, Idaho
Posts: 1,132
iTrader: 39 / 98%
Default

she's all done



__________________
Quote:
Originally Posted by Bobby Ricigliano View Post
I like FDE because when I pose for pictures with my FDE guns it makes me look more like an operator.
Quote:
Originally Posted by Nutnfancy
"Preserve your gat"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 6:53 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.