View Single Post
  #9  
Old 10-03-2009, 6:07 PM
team1320's Avatar
team1320 team1320 is offline
Senior Member
 
Join Date: Sep 2009
Location: North County San Diego
Posts: 883
iTrader: 21 / 100%
Default

Quote:
Originally Posted by HondaMasterTech View Post
There are two main pieces to the side saddle. The aluminum base plate and the plastic shell holder. The trigger pin is replaced with a long bolt and the extractor screw is replaced with a slightly longer extractor screw. Those two fasteners are used to mount the aluminum base plate. The plastic shell holder then attaches to the base plate with six very small screws. Use loctite. The trigger bolt doesn't have to be REALLY tight. If it is too tight the reciever will be squeezed and the action will be stiff or sieze.

It's an easy install. I drilled a hole in the plastic shell holder so I could get to the nut on the extractor screw. This lets me take the whole thing off the gun without taking out the six small screws. I don't know why they didn't do that to beginwith.

Hope this helps.

thanks for the insight! good info... makes sense now that i remember what it looks like...
__________________
Team 1320 est.1996

NRA MEMBER

"No free man shall ever be debarred the use of arms."
-Thomas Jefferson

The hardest part about a zombie apocalypse will be pretending I'm not excited.
Reply With Quote