View Single Post
Old 12-29-2012, 10:10 AM
Bill Steele Bill Steele is offline
Calguns Addict
Join Date: Sep 2010
Location: Idaho
Posts: 5,028
iTrader: 55 / 100%

Originally Posted by johnny1290 View Post
OK just a quick update...I tore apart the duds. Definitely there was powder stuck to everything, even clumpy in some places. Most of them when I pulled the bullet and emptied the powder I couldn't identify the primer due to the powder stuck to it. Definite oil migration to the pocket.

Here's some pics. I have more primers than bullets so I guess I'll yank them, clean em, and load with fresh primers. Sucks but what can you do.

I tried cleaning out the primer and can't tell if it went off or not. My guess is no.

I still have yet to try the rounds with bottomed out primers seating. I'll keep you posted.

I posted the update because I don't want to blame Wolf for my own dumb mistakes

I could only capture two , but the primers were actually worse than it looks in the photo LOL
If you have enough oil in there to clump the powder, that is definitely a problem. Whether it caused your fail to fires is anybody's guess, but for sure oil will cause ignition problems for primers.

Maybe give some of that pump lanolin based lube a try. RCBS and Dillon both make them, or you can make your own 1 part liquid lanolin to 8-10 parts 99% isopropyl alcohol.

In any case, don't use petrolium based oils as lubes.
When asked what qualities he most valued in his generals, Napoleon said, "give me lucky ones."
Reply With Quote