View Single Post
Old 01-27-2008, 11:07 PM
Prc329's Avatar
Prc329 Prc329 is offline
Calguns Addict
Join Date: Oct 2006
Location: Ramona, CA
Posts: 5,609
iTrader: 40 / 100%

Originally Posted by Nom de Guerre View Post
Randall, thanks! That makes sense. I hadn't thought of checking their respective BC's.

I have one other question your reply brought up in my mind.

You wrote, "I'm shooting 155 SMK's at 2875fps and I still have some margin to warm up the load some more."

How do you know how much further you can push your load? Is the pressure generated by the load combination (bullet, powder type, powder charge, etc.) the main determining factor of the safety margin?

Are you using a ballistic program to help determine how fast you can push the 155 Scenar before getting into the danger zone?

I've been working up my loads with the data from a couple of sources of loading manuals, powder manufacturer data, etc., and I then chrono my loads as I work them up. I've been well shy of max loads, but I have no real idea of what the pressures of my loads are. I've just been going on the the info from the loading manuals, and trusting that since I am well below max loads, and in the case of 168 SMK, I am dialed in to right around 2650 - 2680 fps, that I am okay in the safety department.

I'd love to have a ballistic program, but being a Mac computer guy, I'm not sure there's really anything available. I really don't want to load Windows on my Mac, so that's not the solution for me.
All rifles are different so I wouldn't really use the ballistics programs to determine the safety of a rounds. That being said quick load will give you an idea if the load is in the danger zone. The primers can tell you a lot about if you are going to hot. I haven't chronoed my new scenar load but I an guessing it is in the 2750 fps range. I should be able to get it to over 2900 fps with out any issues.

Popped primers, cratering primers, sticky extraction are a couple of things to look for. That tells you that you went to far and to back down a little.
Reply With Quote