Quote:
Originally Posted by duc748bip
Yep the original doesn't close on the "Go" either, just been lucky shooting it for the past years, but just did some research it's a bad batch of barrel with short chamber indicated by several bad review.
|
Several bad reviews do not indicate a barrel problem as those reviews could simply be people with out-of-spec bolts.
The only way to verify a barrel is in or out of spec is to check it with an in-spec bolt.
I have had LOTS of 308 barrels fail minimum headspace in my shop due to plated bolts.
When those same barrels are checked with a good bolt, they pass headspace just fine.
The fix for out of spec bolts due to plating is to deepen the boltface by removing two thicknesses of the plating.