View Single Post
Old 12-13-2012, 11:34 AM
BranNutz BranNutz is offline
Join Date: Aug 2012
Posts: 165
iTrader: 4 / 100%

Originally Posted by lavey29 View Post
Thanks for the reply. It does look white with the flash. I have an 80% lower that is already anodized also and was hesitant to add some engraving not knowing how it would look bare metal but yours looks fine to me so thanks for sharing the close up pic from your build.
Here is no flash so you can see the metal.

Originally Posted by Rorge Retson View Post
What tools did you use for the build? Looking at assembling my own rather than having someone else do it.
I only assembled my lower myself and there was not much to it really if I remember correctly. It was my first time so I had some help.

There was one long allen wrench for the grip screw 3/16 I think but don't quote me. An armorers wrench for the buffer tube nut, and something to help you forcefully tap the pins in place once all your springs are in place for the trigger assembly. That last part goes alot smoother with 2 people.

Then depending on your lower mine uses one small allen wrench for the bolt hold open latch, but some just hammer a pin in.

Last edited by BranNutz; 12-13-2012 at 11:50 AM..
Reply With Quote