Billet Custom Ammo Loading/Range Blocks
Available on most calibers from .22 LR to .50 BMG including wildcats.
Features of these billet custom blocks:
1. CNC milled from solid billet aluminum. Finished block is massive at 6 5/8” x 3 ½” and a full 1” thick weighing from 1 ½ lbs for .30-06 to almost 2 lbs for a .223/5.56. Unlike cheap plastic, no more spilled powder when bumped.
2. Cartridge specific cartridge holes w/chamfered opening ensuring rapid brass insertion and minimal wiggle avoiding powder spillage.
3. Caliber engraved on both sides of the block for a nice true "custom" look.
4. Relief cut machined for primer clearance/protection and safety. The primer does not make contact at all with the bottom of the block.
5. Rounded corners and radius edges ensure snag free. There is no sharp corners or edges on these blocks.
6. Rubber feet prevent damage and sliding on your bench.
7. Can be used at the range or on your loading bench.
8. Smooth surface will stay clean longer and is easy to polish with metal polish should the need arise.
Also available at Sacramento Valley Shooting Center where member can get 15% off.
Price is $35
each for standard calibers.
Group photo of some available calibers.
My 30-06 reloads 168 gr SMK on HXP 78 brass.
Close up of the holes showing the chamfered mouth and if you look into the bottom of the hole, you can see the relief cut for primer clearance. Also the underside of the block showing the rubber feet.
25 round Match Tray. Perfect for matches or range sessions.
Accessory tray. Handy to put your fired cases or other small parts you keep by your bench.
Bullet sorting block. Perfect for reloader that sort their projectile by weight.
Last but not least, it is 100% “MADE IN AMERICA”
using American materials and labor.
Below is what I currently have in stock ready to go:
Item Caliber/ Engraving
Match/Range Tray .223/5.56 NATO
Match/Range Tray .30-06
Match/Range Tray .308 WIN/7.62 NATO
Bullet Sorting Tray .22 CALIBER
Bullet Sorting Tray .30 CALIBER
Standard Block Special Engraving U.S. MODEL 1903
Standard Block Special Engraving U.S. MODEL 1917
Standard Block Special Engraving U.S. MODEL 03-A3
Standard Block Special Engraving U.S. CARBINE .30 M1
Standard Block .223 REM/5.56 NATO
Standard Block 300 AAC Blackout
Standard Block .30-30 Winchester
Standard Block .30 Carbine
Standard Block .303 British
Standard Block .308 WIN/7.62 NATO
Standard Block .30-06
Standard Block .32 S&W
Large Block .338 Lapua Magnum
Standard Block .38 SPEC/.357 MAG
Standard Block .40 S&W
Standard Block .45 ACP
Standard Block .45 GAP
Large Block .45-70 Government
Standard Block 6.5 X 55 Swedish
Standard Block 7.5 X 55 Swiss
Standard Block 7.62 X 54R
Standard Block 9 X 19 NATO
Standard Block 9mm
Monster Block 12 Gauge
High Cap 100 Round .45 ACP
High Cap 100 Round .308 WIN/7.62 NATO
High Cap 100 Round .223 REM/5.56 NATO