View Single Post
Old 08-22-2012, 8:30 AM
vytautus vytautus is offline
Junior Member
Join Date: Aug 2012
Posts: 1
iTrader: 0 / 0%

When you get the side plate off. the only thing you have to do is rotate the hand back on to the side of the hammer, the hammer will lift out. The two cross screws above the trigger guard, one on each side, the left side screw is the cylinder stop, right side screw is the trigger. The loading gate is held in by a screw and a spring behind the hammer. This will get you all the way dissembled. I have the same gun, I can take apart if you want pictures. The biggest problem you will have is the base pin and extractor they require complicated machining.
Reply With Quote