View Single Post
Old 08-16-2011, 11:50 AM
MadRiverArms's Avatar
MadRiverArms MadRiverArms is offline
Join Date: Mar 2008
Location: Riverbank/Modesto area
Posts: 3,150
iTrader: 156 / 100%

I couldn't find any brass round stock that would be suitable to make a drift so I used a 1/4-20 acorn nut with the dome on the muzzle and used it to start pushing the barrel out of the FSB enough to shear what was still in the dimple. Worked like a charm and then I followed it up with a brass 1/4-20 Phillips pan head screw with a steel sleeve over it. Once I got the first ping I kept pumping the jack until the FSB slid off.

Reply With Quote