View Single Post
  #26  
Old 07-05-2009, 12:10 PM
fredieusa's Avatar
fredieusa fredieusa is offline
Member
 
Join Date: Mar 2008
Location: Contra Costa County
Posts: 381
iTrader: 74 / 100%
Default



Fixing an underfolding Stock!

For California residents only. CA residents have to deal with issues pertaining to Folding/Collapsible Stock and Over All Length.

Below method is simple.. (I find it the simplest) No additional hardware, no removal of hardware and best of all, no mods.
Just incomplete instillation and we get our fixed stock.

This situation cannot be corrected without taking off the grip.
So one will need a screwdriver and a punch to get it working again.

------------------------------------------------------------------

All Under Folders should (as in the pic below) have pin access holes at the bottom shelf of the receiver.
If you do not, drill some! to get it to be correct anyway..

Insert the last pin #H (in the LAST step as stated in the post above) from the bottom and let the very end be flush with the receiver.
This WILL NOT ALLOW the push button #F to be depressed.

If you installed the pin from above, use a punch to push it INTO the access hole in the receiver


__________________
...

Last edited by fredieusa; 07-07-2009 at 11:34 PM..
Reply With Quote