View Single Post
  #164  
Old 05-31-2009, 10:02 PM
AM9000's Avatar
AM9000 AM9000 is offline
Senior Member
 
Join Date: May 2009
Location: LB
Posts: 645
iTrader: 19 / 100%
Default



These work really good. The ones i found in a PC parts drawer were exactly 4 5/8" - By the way... these are computer case slot holders. If you have a desktop PC you probably have 10 or so of these in the back of your computer.

All I had to do was elongate the notch on the small 90deg bent portion of the slot holder to make it fit around the spring attachment hole on the follower. Once that elongated "fork" is placed around the spring hole, insert the spring and presto! you have attached the blocking device... (will add photo)...



As a bonus, the shape of downward facing end is angled in such a way that it prevents it from interfering with the spring.
Anyway, seems to have worked well for me. For permanence you have the usual options...

Last edited by AM9000; 05-31-2009 at 10:26 PM..
Reply With Quote