View Single Post
  #63  
Old 04-20-2009, 1:41 PM
bombadillo's Avatar
bombadillo bombadillo is offline
Former Humboldtian
CGN Contributor
 
Join Date: Nov 2007
Location: IDAHO and another proud member of the quitters club!
Posts: 13,856
iTrader: 76 / 100%
Default

If you take it down past the action, trigger unit, and stock you're potentially in over your head. I took mine apart ONE time and that will be the last. You don't really have to do much more than go through all the parts with some picks and patches to keep her running smooth. I go through my barrel with patches, copper solvent, and finish it off with CLP and a bore snake about 3-5 times. Then I run one last patch down with a bit of CLP and check to see if any dirt is coming through still. Its just 2 screws, the one on the stock, and the one somewhere behind the trigger unit I believe. I'm not looking at it right now so I can't remember where the rear screw is.
__________________
http://mossbergmvp.com/index.php?forum/
If you have any questions on the MVP platform, ask me here or on the "other" site. Same handle there.
Reply With Quote