View Single Post
  #1  
Old 07-01-2013, 5:30 PM
EPLOWERS's Avatar
EPLOWERS EPLOWERS is offline
Vendor/Retailer
 
Join Date: May 2013
Location: Bakersfield, Ca
Posts: 187
iTrader: 1 / 100%
Default E P Lowers more information

Hello everyone,

We are EP Lowers founded under EP Arms LLC in 2012 in Bakersfield, CA by me Chris Cook. I had been building and selling custom AR-15ís and gunsmithing for many years. However my dream was to market my own unique products. That is when the idea of a polymer 80% lower was formed; now after a lot of hard work that dream is a reality but Iím not stopping there. My vision is a buttstock to barrel company providing not only lowers but, hand guards, grips, magazines, and any and all accessories as well as other 80% products like AR-10 lowers and 1911 frames made from the same robust materials.

What we offer currently is an 80% completed AR-15 lower receiver unlike any other in the firearms industry. We offer the first ever 80% polymer lower available and the only 80% lower that requires no jig to complete. We are calling it the EP-80. They are made from a super strong fiber reinforced polymer. The exact composition is proprietary but this is much stronger than what is used in other polymer receivers and we did this for two reasons; first we want the best product out there; second rigidity and high strength are necessary for milling. With that said; the buffer tube area is reinforced with additional material as is the front pivot pin area. This is because there has been other lesser polymer lowers by other manufacturers that have failed in these areas. We want the costumer to be confident in our product so we beefed up those areas to meet consumer demands; although our material is much stronger than whatís been previously used. The lowers are jig less in that; the fire control pocket is dissimilar in color so itís clearly outlined what needs to be removed. In the case of the black lowers just mill out the white and leave the black area and you're done. Fire control and pivot pin areas are clearly marked for drilling. You will need a drill press and using a mill vise makes it a lot easier but that's not required. One could just drill to depth and dremel out too or for that matter the process can be finished with a dremel alone. We have been milling them on a harbor freight press and mill vise. As with standard metal lowers it will take some care and patience to complete them but can be quite novice friendly as well. Our product is made in the USA; and we offer a lifetime limited warranty.

We currently offer the only 80% polymer lower available on the market. We are working on an 80% AR-10 mold as well and we have plans to do 80% 1911 polymer frames as well as hand guards, magazines, butt stocks etc. We are working every day to bring these new products to market as well and improve our existing product. We plan on offering at least one new unique product within the year


Our product is offered online at www.eplowers.com. Also we invite folks to check us out on facebook for daily updates at www.facebook.com/EPLowers. Our product will be available at dealer locations as well and we have plans to market at gun shows very soon.


Thank you so much

Kind Regards,
Chris Cook, founder
EP Lowers
EP Arms LLC

__________________
The Original 80% Polymer JIG-LESS lower available!!!!!

E P Arms LLC
www.eparms.com
www.facebook.com/eplowers