Sorry for the lack of comms recently, folks. Replies to the confirmation PM are coming in very slowly, with less than half responding so far. This, together with the number of opt-outs, means we are still well below the minimum order required. As such, our timeline for payment to MRA and placing the order will probably shift a week or more.
On the 226 question, Rick has confirmed that his design will allow one to build a full-size P226 as-is, or a P228/229, which will require removing some material from the dustcover and grip. Takedown & trigger hole positions differ between the two as well, so those will be left un-drilled. Rails will have to be cut (same on all models).
More later as I know it. Stand by.