Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Primary Arms (http://www.calguns.net/calgunforum/forumdisplay.php?f=250)
-   -   Do I need lower rings? (http://www.calguns.net/calgunforum/showthread.php?t=640493)

victor1echo 11-06-2012 5:21 AM

Do I need lower rings?
 
I got my 4x14 ffp scope and really like it. I ordered med rings and the scope's bell sits about 3/4 of an inch above the barrel. I have read that it is best to have the bell as close as you can to the barrel. Also I have a 20moa base, so I think the low rings with the 20moa base would a nice fit. Your thoughts?
Thanks

PrimaryArms 11-06-2012 5:52 AM

Quote:

Originally Posted by victor1echo (Post 9664088)
I got my 4x14 ffp scope and really like it. I ordered med rings and the scope's bell sits about 3/4 of an inch above the barrel. I have read that it is best to have the bell as close as you can to the barrel. Also I have a 20moa base, so I think the low rings with the 20moa base would a nice fit. Your thoughts?
Thanks

Getting lower is good more important than anything is that your not canted meaning that you are level every time.

Using a level I have noticed a big improvement in accuracy at long range.
Get your lower rings and level be sure to lock tight everything and that your mounting the scope level to the gun.
0 using level, run ballistic data, get your DOPE on paper.
https://www.primaryarms.com/Rifle_Sc...vels_s/915.htm
Hope this helps

Dimitri


All times are GMT -8. The time now is 6:05 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.