Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   WTB (Want To Buy) (http://www.calguns.net/calgunforum/forumdisplay.php?f=106)
-   -   San Diego AK Build Party Jan 4-Jan 6, 2013 (http://www.calguns.net/calgunforum/showthread.php?t=638587)

ENTHUSIAST 11-01-2012 9:47 AM

San Diego AK Build Party Jan 4-Jan 6, 2013
 
Guest list is FULL for the:

San Diego AK Build Party January 4 - January 6, 2013

Location is in East County San Diego down a dirt road (cars can make it down the road easily).

Overnight camping is fine as there will be a campfire and a place to BBQ or you can drive home and come back the next day. The facilities are a Port-A-Potty, running water, BBQ and a campfire.

There will be a charge of $100 for this 3 day event to offset the cost of electricity, Port-A-Potty rental, tool/materials replacement costs and general chaos.

Time line:
Friday: Demil/Build Saturday: Build/Parkerize Sunday: Parkerize


Party Time:

Demil Pre-Party starts Friday January 4 ANYTIME after 1:00PM

Build Party Officially begins Saturday January 5 8:00AM til - Sunday January 6 ~8:00PM


Rules:

• Builders acknowlege due to the time line given that they will ARRIVE NO LATER THAN NOON SATURDAY to begin building.

• Only bring a kit that has an ORIGINAL UNCUT BARREL also a matching numbers kit is recommended OR a barrel already HEAD SPACED and POPULATED. No virgin barrel work will be done at this party.

• ALL BUILDERS PLEASE POST WHAT TYPE OF KIT YOU INTEND TO BUILD SO WE ARE 100% SURE WE HAVE ALL THE CORRECT TOOLING FOR YOUR BUILD.

• 1 AK build per person LIMIT!!! No working on multiple builds this will NOT be allowed. Bending extra flats at the end is OK. (Recommended to bring an extra flat as a backup just in case a mistake is made on the first.)

• NEW AKBuilder bent and trimmed flats ONLY (NDS is OK). NO Tapco flats!!!

• Demil as much of your kit as you can before the party and have it ready for assembly.

• You must spray down each and every part with Brake Parts Cleaner and let them completly air dry BEFORE you put them inside the blast cabinet and then spray them down AGAIN and let them completly air dry BEFORE putting them into the parkerizing solution.

• There are neighbors near by but a few rounds of function testing will be permitted on the far corner of the property during the daylight hours to ensure that everyone leaves with a functional AK.

• Please Do Not bring your dog/pets.

• NO picture taking of ANY attendees will be permitted other than by the helpers. (Documenting YOUR build is OKAY but no face shots of any other builder or helper other than yourself will be tolerated.)

• DO NOT bring ANYONE that is NOT on the Guest List unless I okayed them already in advance.

Bring:

Food (Everyone please bring a bag of ice and some meat (Burgers, Dogs, Sausages, Carne Asada) for potluck style BBQ meals to keep the helpers and builders going strong.)
Drinks
Water
Ice (LOTS!!!)
Ice Chest
Snacks (Snickers YUM!)
Chairs
Folding Table

Camping overnight:

Tent
Sleeping Bag
Jacket

*Required Items:

*EZ456 EZ Lock 1-1/2" Cut-off Wheels Quantity: 5
http://www.dremel.com/en-us/Tools/Pa...aspx?pid=EZ456
http://mdm.boschwebservices.com/files/r19811v15.jpg

*EZ402 EZ Lock Mandrel Quantity: 1
http://www.dremel.com/en-us/Accessor...aspx?pid=EZ402
http://mdm.boschwebservices.com/files/r21752v15.jpg

*407 1/2" Sanding Drum Quantity: 1
http://www.dremel.com/en-us/Tools/Pa...l.aspx?pid=407
http://mdm.boschwebservices.com/files/r19869v15.jpg

*5/32" Drill Bit Quantity: 3 ***ONLY BRING AK-Builder.com 5/32" BITS!***
http://www.ak-builder.com/index.php?...oduct_id=30029
http://www.ak-builder.com/images/det...5-32_drill.jpg

*Safety Glasses Quantity: 1 Pair
http://www.harborfreight.com/eyeglas...ors-43946.html
http://www.harborfreight.com/media/c...image_2939.jpg

*Brake Cleaner Quantity: 5 cans per gun
http://www.walmart.com/
http://i635.photobucket.com/albums/u...DSC_8291-1.jpg

Please list any tools and experience that you can provide for the party.

Needed Items:

Generator
12-TON SHOP PRESSES (Orange one from Harbor Freight) Total Needed: 3 2
DRILL PRESSES Total Needed: 4 3
30+ GAL. AIR COMPRESSORS Total Needed: 3 2 1

DISTILLED WATER Total Needed: 10-15 Gallons.
MAPP GAS Total Needed: 2-3 Bottles.
MOTOR OIL (NEW not used) Total Needed: 5 quarts.

Recommended Items:
DREMEL (If you have one bring it)
LARGE HAMMER
PUNCH SET
AUTOMATIC CENTER PUNCH
HEAVY DUTY EXTENSION CORD
PAPER TOWELS
BLACK TRASH BAGS

GUEST LIST: 25 BUILDER LIMIT.

Names in GREEN are confirmed to receive RSVP then directions, ORANGE is maybe and RED is cancelled.

Helpers:

ENTHUSIAST: New AK Builder Flat Bending Jig, Barrel Press Kit, 5/32" & #16 Screw Machine Drill Bits, 5mm & 7mm Reamer Set, 2" & 1" C-Clamps, AK Builder Rivet Tool, Hardened Trigger Guard Rivet Drilling Jig, Trunnion Rivet Hole Drilling Fixture, Trigger Guard Riveting Jig, Toth Bolt Cutter Style Rivet Tool, (Beefcake) Long Rivet/Center Support Jig, Sight Removal Tool, Automatic Center Punch, Punch Set, Small Sledge Hammer, Rubber Mallet, Drill Press Vice, 12-Ton Press, Drill Press, Mapp Torch, Spot Welder, Blast Cabinet, Park Tank, Propane Burner, 7.62x39 & 5.45x39 GO/NO-GO Headspace Gauges, Eye & Ear Protection CONFIRMED.

AIMSMALL: CONFIRMED.

858casper858: CONFIRMED.

Jayruta: CONFIRMED.

fxjets: CONFIRMED.

Lowlight75: CONFIRMED.

Builders:

1. Rooftop Voter: Romy RPK CONFIRMED.
2. grizzly959: CONFIRMED.
3. section31: Yugo M70 CONFIRMED.
4. AVID HUNTER: Yugo M70 CONFIRMED.
5. Volksgrenadier: MAYBE.
6. GJC: Romy G CONFIRMED.
7. bigbob76: MAYBE.
8. mo-star: Polish Underfolder CONFIRMED.
9. S470FM: AK 105 clone/NDS-2SF receiver CONFIRMED.
10. maxwellweeeweee!!!!: Egyptian Madi CONFIRMED.
11. Readytoroll: Romy G CONFIRMED.
12. P.W.: Tula Micro AK104 Pistol Build CONFIRMED.
13. bplvr: Romy G CONFIRMED.
14. heather1437: Romy G CONFIRMED.
15. rec_shooter: MAYBE.
16. Mark13: Bulgy 74 CONFIRMED.
17. infringed711: Romy G CONFIRMED.
18. CaliB&R: Izhmash AKM - Dremel, ice, distilled water & Brats CONFIRMED .
19. eightmd: Polish Underfolder CONFIRMED.
20. JXD: Bulgy 74 CONFIRMED.
21. Bommerboysd88: Bulgy 47 CONFIRMED.
22./23. sandfishkiller+Son : Bulgy 74/Egyptian Madi CONFIRMED.
24. McCaslin: Romy G CONFIRMED.
25. Dhena81: Bulgy 74 CONFIRMED.

Finishing up Build
1. 36fordpu: Bulgy 74 CONFIRMED.
2. FirewalkerSDFD: Tula AKM CONFIRMED.
3. John3:16: Threading Saiga Barrel CONFIRMED.

Waiting List:
1. Guest
2./3. dragunovussr+1 Polish Underfolder

ENTHUSIAST 11-01-2012 9:47 AM

ATTENTION: New builders read 69Mach1's tutorial for AK build parties here BEFORE you sign up:
http://www.calguns.net/calgunforum/s...d.php?t=292985

How to lock folding butt stocks:
http://calguns.net/calgunforum/showthread.php?t=185188

Quote:

Question: I am interested in attending the build party but I dont have a clue about AK's what is a rough estimate of the cost to build one?
CA Compliant AK Rifle parts list and *approximate cost:

Quote:

Romanian G original barrel, matching #s PARTS KIT $329-$399

AK47 7.62 Flat With Trunnion Holes Top Rail Bent, Stepped & Trimmed $20
(US made 922r 1 part) (Recommended Qty. 2)
http://ak-builder.com/index.php?disp...oduct_id=29823

AKM Fixed Stock Rivet Set $9 (Recommended Qty. 2)
http://www.ak-builder.com/index.php?...oduct_id=29975

AK Center Support for 1mm Receivers $7
http://www.ak-builder.com/index.php?...oduct_id=29976

Red Star Arms FCG Pin Retaining Plate $5
http://www.ak-builder.com/index.php?...oduct_id=29836

Tapco G2 Single Hook Trigger (US made 922r 3 parts) $30
http://www.ak-builder.com/index.php?...oduct_id=29979

Slant Brake (US made 922r 1 part) $12
http://www.ak-builder.com/index.php?...oduct_id=29810

Tapco Standard AK Pistol Grip (US made 922r 1 part) $10
http://www.ak-builder.com/index.php?...oduct_id=29981

Mag Lock $38 (CA compliance part)
http://ak-builder.com/index.php?disp...oduct_id=30199

10 Round AK47 Mag $22 (CA compliance part)
http://ak-builder.com/index.php?disp...oduct_id=30172

AK Rifle total= about $550-$600*
CA Compliant AK Pistol parts list and *approximate cost:

AK pistol* Single Shot compliance info: Pistol has to have a minimum 6" barrel *Note when building an AK Pistol Federal 922r does NOT apply.

Once an AK Pistol is built as a COMPLETE single shot pistol, you can later modify it to a 10 round semi-auto at anytime by using 10 round mags. NO forward pistol grip on AK pistols.

Quote:

AMD-65 original barrel, matching #s PARTS KIT $300-$399

Standard AK Flat Fixed Stock Top Rail Bent, Stepped & Trimmed $20 (Recommended Qty. 2)
http://www.ak-builder.com/index.php?...oduct_id=29838

AKM Fixed Stock Rivet Set $9 (Recommended Qty. 2)
http://www.ak-builder.com/index.php?...oduct_id=29975

AK Center Support for 1mm Receivers $7
http://www.ak-builder.com/index.php?...oduct_id=29976

Red Star Arms FCG Pin Retaining Plate $5
http://www.ak-builder.com/index.php?...oduct_id=29836

Tapco G2 Single Hook Trigger $30
http://www.ak-builder.com/index.php?...oduct_id=29979

Slant Brake $12
http://www.ak-builder.com/index.php?...oduct_id=29810

Pistol Trunnion $45
http://www.ak-builder.com/index.php?...oduct_id=29874

Mag Lock $38
http://ak-builder.com/index.php?disp...oduct_id=30199

ZERO round mag (Make or borrow one.) ~$20

AK Pistol total= about $490-590*
Parts kits for AK rifles (Romanian G) or AK pistols (AMD-65):
http://www.solartactical.com/
http://www.gunbroker.com/
http://www.akfiles.com/forums/
http://www.calguns.net/

AK rifle Federal 922r compliance info:

Quote:

Originally Posted by 69Mach1 (Post 4160594)

Federal 922r compliance.

A stamped AKM has 16 listed parts in it for 922r. The Fed's want you to limit those parts to just 10 foreign ones to be legal. The parts only add up when everything is attached, including the magazine. Replace some of them with quality US made parts.

1. Receiver
2. Barrel
3. Front Trunnion
4. Bolt
5. Bolt Carrier
6. Gas Piston
7. Trigger (fire control group)
8. Hammer (fire control group)
9. Disconnector (fire control group)
10. Buttstock
11. Handguard (upper and lower counts as 1)
12. Pistol Grip
13. Magazine Body
14. Magazine Floorplate
15. Magazine Follower
16. Muzzle Device (Muzzle Brake or Flash Hider that's not welded on)

WARNING: Regarding the bad fire control group parts.
PLEASE discard them from your kit if it included them.

***DO NOT BRING FULL AUTO FCG PARTS!!!***

http://i82.photobucket.com/albums/j2...ak-5pc-rr2.jpg

ENTHUSIAST 11-01-2012 9:47 AM

If your name is in ORANGE with a MAYBE by your name please READ my first 2 posts and then post here with the following information in your post:

1. Type of AK Parts Kit you are bringing:
(example: Romy G)

2. List of your Federal 922(r) compliance parts:
(example: US made Flat, Muzzle Brake, Fire Control Group, Pistol Grip)

3. List of CA Compliance parts:
(example: Mag Lock and 10 Round Mag or Featureless)

Your post with the appropriate information will change your status to CONFIRMED for this Build Party.

69Mach1 11-01-2012 9:52 AM

Mmmmm.....tacos.

Have fun D.

ENTHUSIAST 11-01-2012 10:15 AM

Thanks Mach will do!

I got an order of 10 with your name on 'em anytime you come to SD!

infringed711 11-01-2012 10:50 AM

1) Rommy G kit w/ original barrel
2) ak builder flat, us muzzle brake, us pistol grip, us trigger
3) Solar tactical bb/ 10rd mag

Rooftop Voter 11-01-2012 11:05 AM

1. Romy RPK
2. US flat, US Barrel, Tapco FCG, US pistol grip
3. No pistol grip ( featureless until I cross back into AZ) :43:;):punk::13:

Does anyone have the 1.5mm ram to fold the RPK flat that they can bring? That would be great!

Holy crap - I just realized the guest list is already filled up? WOW?!?! That is freaking NUTS!

bplvr 11-01-2012 11:55 AM

Please confirm both heather1437 and myself.
**************************************

Romy G 2x ,Tapco double hooks {3} ,Curtis' flats {1} w/ double hook cut outs/
Tapco mag {3} and steel mag with USA follower , Ergo grips {1}, USA slant brake {1}
and 4.5" USA brake for the G side folder {1},and my USA handguard.
Heather's also has a new USA barrel.

That is 16 minus 10 at this point for Heather's =6
and mine is 16 minus 8 = 8 for 922r.

GJC 11-01-2012 12:00 PM

1) Rommy G kit w/ original barrel- (ordered)

2) US made Flat, Muzzle Brake, Fire Control Group, Pistol Grip

3)Mag Lock and 10 Round Mag

AKSOG 11-01-2012 2:24 PM

disregard

Mark13 11-01-2012 2:32 PM

1)Bulgy 74
2)US flat, brake, trigger group, pistol grip
3) mag lock, 10 round mag

AVID HUNTER 11-01-2012 2:52 PM

Does anyone who is attending have PSL tools? I have a PSL kit I woulf like to build, but if not, I can do a 47 or 74.

36fordpu 11-01-2012 5:58 PM

will attend with my son mark13. see his reply this time only 1 74

S470FM 11-01-2012 8:56 PM

AK 105 clone on NDS 2SF receiver

Readytoroll 11-01-2012 9:52 PM

1) Romy orginal barrel & matching #'s
2) akbuilder flat, tapco FCG, muzzle break, pistol grip
3) solar tactical gen2 mag lock, 10/30 magazine

858casper858 11-02-2012 4:37 AM

:party:

I can't wait!

daves100 11-02-2012 5:23 AM

build party
 
Tag for update, I'm in for the build party have to firgue out what i'm going to build!!

CaliB&R 11-02-2012 9:00 AM

Ok, 100% confirmed, boss gave me the days off. w00t! Parts are inroute, then barrel will be sent off to get populated and headspaced.

1. Izhmash AKM
2. Ak-builder flat, Muzzle Brake, Fire Control Group, Green Mountain Barrel
3. Mag Lock and 10 Round Mag

For the party, will be bringing a dremel, ice, distilled water, maybe some brats (sausages, not kids) and maybe more. Will update post again if I can bring more.

AIMSMALL 11-02-2012 11:35 AM

Quote:

Originally Posted by S470FM (Post 9637959)
AK 105 clone on NDS 2SF receiver

Sweet! What barrel/ build parts will you be using?

S470FM 11-02-2012 12:59 PM

I was going to use a 12" bbl + a pinned 4.7" 4 piece booster from CNC warrior, but KVAR is all out. I'll be using a 16" bbl assembly instead along with a Bulgy 74 parts kit, NDS receiver (possibly a receiver from 74ullc) and a Russian polymer side folding stock.

AIMSMALL 11-02-2012 2:09 PM

That's cool, have you seen the cnc warrior cans for the ak105's that actually slide over the 16" barrel to make it look shorter?

S470FM 11-02-2012 2:39 PM

i have not, but i will check out their site now. thx

AIMSMALL 11-02-2012 4:50 PM

http://www.cncwarrior.com/shop/24320-4pc-barrel-cover/

This rifle has a 16" barrel
http://i761.photobucket.com/albums/x...rbarrelcvr.jpg

S470FM 11-02-2012 5:22 PM

that looks short and it looks awesome. I will be buying the CNC Warrior extension, thanks.

AIMSMALL 11-02-2012 8:15 PM

Quote:

Originally Posted by S470FM (Post 9643019)
that looks short and it looks awesome. I will be buying the CNC Warrior extension, thanks.

Be carefull not to confuse the barrel extension with the barrel cover, they look pretty much the same but the extension has threads at the end closest to the muzzle while the cover has threads at the end furthest from the muzzle and slides over the barrel to conceal it and make it look like a shorter barrel. Pretty slick huh. Looking forward to seeing this build come together. :)

You'll also need one of these to do the clone you want to do.
http://www.k-var.com/shop/AK-142B.html

or this
http://www.k-var.com/shop/AK-105BL.html
.
.

John3:16 11-02-2012 8:19 PM

can i get my saiga barrel threaded for comp at this party? sorry for the noob question i didnt have any idea these things existed.

sandfishkiller 11-04-2012 12:49 AM

I want to come to the build have bulgarian side fold and my son has egyptian 47

ENTHUSIAST 11-04-2012 5:34 PM

Quote:

Originally Posted by John3:16 (Post 9644058)
can i get my saiga barrel threaded for comp at this party? sorry for the noob question i didnt have any idea these things existed.

PM sent.

Quote:

Originally Posted by sandfishkiller (Post 9650482)
I want to come to the build have bulgarian side fold and my son has egyptian 47

Added you both to the waiting list.

Rg619 11-04-2012 7:10 PM

Does anyone have tools for a Yugo build to bring to the party?

maxwellweeeweee!!!! 11-05-2012 3:26 PM

confirmed
 
egyption madi

mrlonewolf 11-05-2012 8:26 PM

Just a thought.

What if a Zombie try/dare to touch/approach my Ice tea??....:eek::shrug:

:mad:

AVID HUNTER 11-05-2012 9:02 PM

It doesn't look like I am going to be able to build the PSL, so the polish under folder it is. Where do you send the kits to populate the barrel? Also, other than the kit, trigger group, flat, and food, beer water is there anything else I need to bring?

ENTHUSIAST 11-06-2012 9:17 AM

Quote:

Originally Posted by mrlonewolf (Post 9662767)
Just a thought.

What if a Zombie try/dare to touch/approach my Ice tea??....:eek::shrug:

Battle Plan:

Mrlonewolf's Ice Tea <--- AK Builders ---->http://demonsresume.files.wordpress....predator-a.gif Zombies ---->http://theoohtray.com/wp-content/upl...il-ZOMBIES.jpg





Quote:

Originally Posted by AVID HUNTER (Post 9663036)
It doesn't look like I am going to be able to build the PSL, so the polish under folder it is. Where do you send the kits to populate the barrel? Also, other than the kit, trigger group, flat, and food, beer water is there anything else I need to bring?

For barrel population PM Calguns member turbothis for cost, what parts to send and turn around time. It should be about $120 and 1-3 weeks.

You will also need to pick an option either to fix the Underfolder in place so it will NOT FOLD (copper pipe & hose clamp $5)
http://calguns.net/calgunforum/showthread.php?t=185188

OR

Buy an extended muzzle brake if you want to use the Underfolder ($85 Aimsmall sells them and he will be at the build party.)
http://www.calguns.net/calgunforum/s...d.php?t=409569

Polish Underfolder parts list:

Polish Underfolder Flat Top Rail Bent, Stepped and Trimmed $35
(US made 922r 1 part)
http://ak-builder.com/index.php?disp...oduct_id=29790

AKS Underfolder Rivet Set $9
http://www.ak-builder.com/index.php?...oduct_id=29975

AK Center Support for 1mm Receivers $7
http://www.ak-builder.com/index.php?...oduct_id=29976

Red Star Arms FCG Pin Retaining Plate $5
http://www.ak-builder.com/index.php?...oduct_id=29836

Tapco G2 Single Hook Trigger (US made 922r 3 parts) $30
http://www.ak-builder.com/index.php?...oduct_id=29979

Slant Brake (US made 922r 1 part) $12
http://www.ak-builder.com/index.php?...oduct_id=29810

Tapco Standard AK Pistol Grip (US made 922r 1 part) $10
http://www.ak-builder.com/index.php?...oduct_id=29981

Mag Lock $38 (CA compliance part)
http://ak-builder.com/index.php?disp...oduct_id=30199

10 Round AK47 Mag $20 (CA compliance part)
http://ak-builder.com/index.php?disp...oduct_id=30172

You also need to bring the items under *REQUIRED ITEMS in my 1st post:
Quote:

Originally Posted by ENTHUSIAST (Post 9633444)
*Required Items:

*EZ456 EZ Lock 1-1/2" Cut-off Wheels Quantity: 5
http://www.dremel.com/en-us/Tools/Pa...aspx?pid=EZ456
http://mdm.boschwebservices.com/files/r19811v15.jpg

*EZ402 EZ Lock Mandrel Quantity: 1
http://www.dremel.com/en-us/Accessor...aspx?pid=EZ402
http://mdm.boschwebservices.com/files/r21752v15.jpg

*407 1/2" Sanding Drum Quantity: 1
http://www.dremel.com/en-us/Tools/Pa...l.aspx?pid=407
http://mdm.boschwebservices.com/files/r19869v15.jpg

*5/32" Drill Bit Quantity: 3 ***ONLY BRING AK-Builder.com 5/32" BITS!***
http://www.ak-builder.com/index.php?...oduct_id=30029
http://www.ak-builder.com/images/det...5-32_drill.jpg

*Safety Glasses Quantity: 1 Pair
http://www.harborfreight.com/eyeglas...ors-43946.html
http://www.harborfreight.com/media/c...image_2939.jpg

*Brake Cleaner Quantity: 5 cans per gun
http://www.walmart.com/
http://i635.photobucket.com/albums/u...DSC_8291-1.jpg


Jayruta 11-06-2012 9:27 AM

Can't wait! Got the days off aswell. If anyone needs barrels populated, my services are also available.

S470FM 11-06-2012 10:32 AM

+1 for Jayruta and KCStott if you're in the San Diego area

kcstott 11-06-2012 4:26 PM

Sorry but My shop is shut down for the time being until I get a pocket plate done for a guy going to Africa. I won't be taking on new stuff till long after the build party.
More work for you Jayruta.

I'll also have the 5.45X39 Headspace gages. just ordered $300 worth of stuff from Brownell's

kcstott 11-06-2012 4:27 PM

Quote:

Originally Posted by mrlonewolf (Post 9662767)
Just a thought.

What if a Zombie try/dare to touch/approach my Ice tea??....:eek::shrug:

:mad:

Got your back I always pack my HnK USP 45:43::43:

Jayruta 11-06-2012 4:43 PM

Lol ok. I have all tools needed to headspace and a laser bore sighter. Pm me if you need it done! :-)

ENTHUSIAST 11-07-2012 5:23 PM

Plug for Jayruta all barrel population work he has preformed has headspaced and functioned PERFECT no issues.

eightmd 11-08-2012 6:06 PM

Quote:

Originally Posted by ENTHUSIAST (Post 9633451)
If your name is in ORANGE with a MAYBE by your name please READ my first 2 posts and then post here with the following information in your post:

1. Type of AK Parts Kit you are bringing:
(example: Romy G)

2. List of your Federal 922(r) compliance parts:
(example: US made Flat, Muzzle Brake, Fire Control Group, Pistol Grip)

3. List of CA Compliance parts:
(example: Mag Lock and 10 Round Mag or Featureless)

Your post with the appropriate information will change your status to CONFIRMED for this Build Party.

1. Type of AK Parts Kit you are bringing: Polish under folder kit from Arms of America, barrel populated by Jayruta

2. List of your Federal 922(r) compliance parts:
* AK-Builder Polish underfolder flat with rails
* Tapco pistol grip, or I might use the original grip
* Tapco G2 single hook trigger group
* Tapco slant muzzle break
* Solar tactical magazine

3. List of CA Compliance parts:
* Solar tactical 10 round magazine
* Solar tactical Gen 2 AK magazine lock

I think that's it. I don't think I forgot anything.


All times are GMT -8. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.