Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   New Product Announcements (http://www.calguns.net/calgunforum/forumdisplay.php?f=217)
-   -   Left Handed Charging Handles AK-47 Davis Tactical Solutions LLC (http://www.calguns.net/calgunforum/showthread.php?t=612610)

Doug_d15 08-25-2012 6:43 PM

Left Handed Charging Handles AK-47 Davis Tactical Solutions LLC
 
4 Attachment(s)
LINCH charging handles now for sale at Davis Tactical Solutions LLC.

120.00 plus S&H http://lastroundholdopenak47.com

doug_d15@hotmail.com

Attachment 166229

The Left Handed Intergraded Non-reciprocating Charging Handle is designed as a drop-in application for the Kalashnikov rifles. This charging handle requires no modification to the weapon system. When installed a primary and alternate means of operating the bolt carrier will be established. The charging handle is non-reciprocating during firing. Any modified FN-FAL charging handle can be utilized. This product will work with most small calibers for the Kalashnikov platforms, 5.45x39, 5.56x45, and the 7.62x39.

The LINCH was designed to work with all standard length Kalashnikov receivers. This distance is 9.325 inches indicated from the rear sight block to the rear trunnion. The width of the receiver should be 1.350 inches.

The LINCH top covers are based on Bulgarian smooth design. This product installs on most Kalashnikov rifles. The length is tentatively 9.25-9.33 inches. Some covers may need to be filed down on the front edge for proper fitting. The width outside diameter is tentatively 1.435-1.442 inches. some Kalashnikov covers facilitating rear sights. This product would not be a direct replacement on those rifles.

Features:

Made in the USA.

These top covers will only offer the inch pattern folding charging handles.

The charging pin was made universal to fit the metric non-folding handles.

The parts are made from surplus bulgarian top covers and FN FAL charging handles.

The slide channel is made from 4140 steel heat treated to 52 rockwell.

All welds are low heat tig production and grinded down for clearance.

The cover are coated with a black Dura Coat finish.

The charging handles will not allow the left side folding stocks unless the knob is grinded down. R0.350 TAPERING BACK TOR0.100 @ 1.0" DEPTH.

Will not work with:
Galil rifles(none)
Zastava Yugo's rifles (none)
Valmet rifles (none)
USSR AK-107-108,AKMSU,and AK74SU
Romanian PSL rifles .308 7.62x54R
SAIGA-12 shot guns (none)

Patent number: 8,117,954



Doug Davis
(251)-366-1241

Attachment 166233

zfields 08-25-2012 6:52 PM

Very cool. Any way to intergrate a top rail on this?

Sent from my fingers, to your face.

Doug_d15 08-27-2012 8:06 PM

Left handed charging handle
 
Some rail options can be used with this top cover.
I have a link to the site for technical information.

http://lastroundholdopenak47.com/ima...NCHProduct.pdf

Marksman829 09-19-2012 11:31 AM

Tagged. I gotta get one of these for a pistol build!!

Doug_d15 10-19-2012 6:18 PM

We are currently out of stock, and we are taking pre-orders.
Delivery date is tentatively the 04NOV12.

Best Regards
Doug Davis

zombiescanlearn 11-14-2012 1:51 PM

So what's the new delivery date? How sure are you about that one? Thanks.

MadMattJay 11-18-2012 1:29 PM

I've been looking for the best left hand solution and this one looks like the winner - well done! What's your next innovation?

13withinfinity 11-20-2012 10:49 PM

This would be PERFECT for my AK pistol


All times are GMT -8. The time now is 6:00 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.