Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Primary Arms (http://www.calguns.net/calgunforum/forumdisplay.php?f=250)
-   -   3x Magnifer paired with SPARC Height Question. (http://www.calguns.net/calgunforum/showthread.php?t=611739)

boxcutter3005 08-23-2012 11:58 AM

3x Magnifer paired with SPARC Height Question.
 
Hi there, I was wondering, if I have a vortex sparc already on my AR, with the tall riser, and I order a PA 3x Magnifier, will the standard PA FTS mount be tall enough? or would I need something else? Thanks

PrimaryArms 08-23-2012 9:55 PM

Can you measure it so we can check?
Thanks
Dimitri

boxcutter3005 08-27-2012 4:51 PM

The riser is ~26mm and the center of the red dot on this riser is ~36mm

marsh1 08-27-2012 6:12 PM

Quote:

Originally Posted by boxcutter3005 (Post 9214179)
The riser is ~26mm and the center of the red dot on this riser is ~36mm

Is that 36mm above the top of the rail. I fit is that is a little lower than normal absolute cowitness. Our standard magnifier mount for sure. With the tall riser I was thinking it was more like 1.6". We measure from the top of the rail to the center of the sight window.

Marshall

boxcutter3005 08-28-2012 7:25 AM

Quote:

Originally Posted by marsh1 (Post 9214732)
Is that 36mm above the top of the rail. I fit is that is a little lower than normal absolute cowitness. Our standard magnifier mount for sure. With the tall riser I was thinking it was more like 1.6". We measure from the top of the rail to the center of the sight window.

Marshall

Thanks Marshall, my measure might have been off, so I'll think about it and probably give the standard mount a try.

EDIT: Oh your 3x magifiers seem to be out of stock, do you expect to have more in? I would like to know when I should check back

PrimaryArms 08-28-2012 10:00 AM

Should be in Friday

Dimitri


All times are GMT -8. The time now is 10:01 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.