Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Rimfire Firearms (http://www.calguns.net/calgunforum/forumdisplay.php?f=165)
-   -   Modification "How To's" Archive (http://www.calguns.net/calgunforum/showthread.php?t=586390)

pennys dad 06-21-2012 8:21 AM

Modification "How To's" Archive
 
Lets put together an archive of Modification "How To's" and the videos used to make them happen

Remember this is a "How To" mod thread.

If you have favorites, submit them on this thread, we can start collecting here. Provide as much information as possible, do not assume that it is just known, frame the modification and list make, model and other important information.

defcon 06-21-2012 8:26 AM

Some aftermarket, airsoft and WWII stocks

Ruger 10/22 Barrett M82A1 and Marlin XT-22 M200 Cheytac Intervention
http://farm8.staticflickr.com/7235/7...08b263eb_o.jpg

Ruger 10/22 H&K SL8
http://farm8.staticflickr.com/7079/7...464d9590_o.jpg

Marlin XT-22 L96 AICS
http://farm6.staticflickr.com/5236/7...1a19c8ce_o.jpg

Marlin XT-22 Blaser LRS1
http://farm8.staticflickr.com/7231/7...3524017f_o.jpg

Ruger 10/22 Archangel M1A
http://farm6.staticflickr.com/5239/7...9c3d9b32_b.jpg

Ruger 10/22 Archange Sparta
http://farm6.staticflickr.com/5323/7...499231b5_b.jpg

defcon 06-21-2012 8:27 AM

Marlin 795 L85
http://farm8.staticflickr.com/7064/7...3a3939b8_c.jpg

Ruger 10/22 AUG
http://farm8.staticflickr.com/7063/7...afab6aa4_c.jpg

Ruger 10/22 PS90
http://farm8.staticflickr.com/7245/7...3dc8a5dc_b.jpg

Ruger 10/22 FS2000
http://farm8.staticflickr.com/7206/6...15bfbfc0_b.jpg

Ruger 10/22 Beretta RX4 Storm
http://farm8.staticflickr.com/7179/6...e000f02d_z.jpg

Ruger 10/22 M14 EBR and Marlin 795 Tavor TAR21
http://farm8.staticflickr.com/7197/6...8b31c646_z.jpg

defcon 06-21-2012 8:27 AM

Ruger 10/22 Bren and FND BAR
http://farm8.staticflickr.com/7224/7...4848832b_b.jpg
http://farm8.staticflickr.com/7073/7...8f0f6aab_b.jpg

Marlin 795 Barrett M99
http://farm8.staticflickr.com/7075/7...71968049_c.jpg

Marlin 795 SCAR
http://farm9.staticflickr.com/8021/7...2dba0c1b_c.jpg

Ruger 10/22 AK47
http://farm8.staticflickr.com/7090/7...7b432798_c.jpg

Ruger 10/22 M249 SAW
http://farm8.staticflickr.com/7101/7...3ae0aed6_c.jpg

defcon 06-21-2012 8:27 AM

Ruger 10/22 Vietnam M60
http://farm8.staticflickr.com/7245/7...7148e82e_c.jpg

Ruger 10/22 Beretta ARX-160
http://farm9.staticflickr.com/8147/7...ec1906a5_b.jpg

Marlin 795 UMP and Ruger 10/22 G36
http://farm7.staticflickr.com/6098/6...823a00eb_z.jpg


pennys dad 06-21-2012 8:54 AM

Ruger 10/22 Auto Bolt release Mod using a file (you can use a dremel) video.


RalphAdopolis 09-07-2012 9:42 PM

Defcon you my friend have some talent

RalphAdopolis 09-07-2012 9:42 PM

Defcon you my friend have some talent

EdCo 09-12-2012 10:31 PM

I was tired of my Beretta Neos factory sights, so I thought I would give this a try. http://www.rimfirecentral.com/forums...d.php?t=442878 I bought a 1/16 and a 3/32 fiber optic rod from http://www.castbullet.com/forods.html I tried the 3/32 rod first but the rear sight covered it. I did buy extra front sights just in case.
http://i969.photobucket.com/albums/a...912_205918.jpg http://i969.photobucket.com/albums/a...912_210009.jpg http://i969.photobucket.com/albums/a...912_210048.jpg

alpine600 10-09-2012 10:34 PM

got inspired by defcons mods :D

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my Savage mark ii. Although it looks a little off with the stainless steel barrel. It's a work in progress...
http://farm9.staticflickr.com/8449/8...dcbfab6f_c.jpg

http://farm9.staticflickr.com/8037/8...5dc98781_c.jpg

damngato 10-10-2012 6:35 AM

Quote:

Originally Posted by alpine600 (Post 9487174)
got inspired by defcons mods :D

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my Savage mark ii. Although it looks a little off with the stainless steel barrel. It's a work in progress...
http://farm9.staticflickr.com/8449/8...dcbfab6f_c.jpg

http://farm9.staticflickr.com/8037/8...5dc98781_c.jpg

Looks good man, one hell of a start!

defcon 10-10-2012 8:36 AM

Quote:

Originally Posted by alpine600 (Post 9487174)
got inspired by defcons mods :D

So I bought an L96 spring airsoft on CL. Tore it all the way down and went to town on it's guts with a dremel. Mated it with my

bravo man.:clap:

looks good.

so what parts did you have trouble with? how was the difficulty? you got any plans for another .22 conversion? it gets addicting. its a different kind of black rifle disease

alpine600 10-10-2012 12:08 PM

Thanks defcon

Difficulty from 1-10: 5.5

The bothersome part was shaving away the internal walls so that the reciever and the mag well would fit. It was hard trying to figure out which one to shave or not to shave. I had to eyeball it, like you said, since there isn't much of a write up. I still have to cut a trough so the bolt can slide back and removed.

Also have to cut a hole for the mag well. Not sure if I want to leave it open or make it tidy and seal around it using epoxy. The ejection port lined up fairly well and clears the stock. I had to cut away some of the stock so that the safety selector can freely move.

Question. How did you support the rear part of the action? As of right now, the front part is stable using the screw from the airsoft. The rear part is just free floating.

Cheers!

defcon 10-10-2012 12:31 PM

Quote:

Originally Posted by alpine600 (Post 9489761)
Thanks defcon

Difficulty from 1-10: 5.5

The bothersome part was shaving away the internal walls so that the reciever and the mag well would fit. It was hard trying to figure out which one to shave or not to shave. I had to eyeball it, like you said, since there isn't much of a write up. I still have to cut a trough so the bolt can slide back and removed.

Also have to cut a hole for the mag well. Not sure if I want to leave it open or make it tidy and seal around it using epoxy. The ejection port lined up fairly well and clears the stock. I had to cut away some of the stock so that the safety selector can freely move.

Question. How did you support the rear part of the action? As of right now, the front part is stable using the screw from the airsoft. The rear part is just free floating.

Cheers!

the AICS stock that i have is from WELLS G96 gas. i havent touched it yet and was planning to put a tube fed Marlin XT-22

i did use my Savage MKII on a Blaser LRS1 and reused the 2 action screws. the one near the magazine i just used an aluminum strip and bolted it to the side of the body. the barrel is free floating right now but would like to bed it with aluminum and epoxy

i did have issues with the safety/fire selector. sometimes it would lock the trigger even though i have the selector set to fire. i think part of the internal stock was blocking it. but its fixed now.

you can weld or JB weld a block with a hole in it underneath the rear action and bolt it on to the AICS stock.

or maybe use an aluminum strip and JB weld it to the rear action and bolt it to the stock.

there's various ways you can do it. just think of creating brackets or a cube with a hole so you can mount it to something. kinda like using retaining pins. it has to go through something.

elfstone 10-28-2012 6:25 PM

Trigger Job Filing:

http://youtu.be/PHyQBxRlbxU


All times are GMT -8. The time now is 5:28 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.