Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   BulletButton.com (http://www.calguns.net/calgunforum/forumdisplay.php?f=202)
-   -   HK 9X series BB? (http://www.calguns.net/calgunforum/showthread.php?t=377356)

tiger222 12-27-2010 5:55 PM

HK 9X series BB?
 
Hi AP

Do you guys plan in the future to make a BB for the HK 9X series type rifles?
The current offering is very time consuming to install and custom fit, and occasionally rickety. It would be nice to have something that installed as easily as an AR BB and was made of metal.

Thx

Prince50 12-27-2010 9:00 PM

We do in fact make a Bullet Button for the PTR91,HK91, MP5, SP89 Series rifles, no gunsmithing, and all metal ie Steel and Aluminum construction.

Contact me directly for information.

We do need to add it to the website, as my dealers have been selling it for me for several years now.

I appreciate the question!

Darin

tiger222 12-28-2010 8:03 PM

Quote:

Originally Posted by Prince50 (Post 5514731)
We do in fact make a Bullet Button for the PTR91,HK91, MP5, SP89 Series rifles, no gunsmithing, and all metal ie Steel and Aluminum construction.

Contact me directly for information.

We do need to add it to the website, as my dealers have been selling it for me for several years now.

I appreciate the question!

Darin

PM sent as per request.
Thx!

shooterdave 01-03-2011 9:44 PM

i'd like to see a picture of it. how hard is it to install? i may be buying a g3 clone in the near future.

maurice05 01-04-2011 10:52 PM

i like a pic too i was going to order a radlock in the morning so i can ship off my parts to be built. m.williams05@yahoo.com

tiger222 01-07-2011 5:05 PM

Just got one today lads, will be installing this weekend and report, I'm changing a featureless into a BB model...

**update, took a look at the kit and if its as straight foward as it looks, I'll have to buy a leash for the left over
cake in the fridge, because it's going for a walk!!**

Simple bolt on, no plastic to file and test fit over and over, and mess to clean up, might
be a dream come true!

tiger222 01-10-2011 7:07 PM

Finally got a chance to fit on the P50 HK BB and I have to say I am very pleased.
I converted my featureless my HK13E clone
http://i56.tinypic.com/28b9lqt.jpg
And installed the BB along with a target grip and special trigger pack (housing needs to be painted)
http://i51.tinypic.com/24b8bo6.jpg

The snap ring fitting took a little while to get co-ordinated, (as I am not the adept at installing them yet) but everything else was a simple bolt on. Not only is it a full mechanical BB, but you don't have to cut the inside guide portion of polymer lowers as the lower does not keep the BB attached to the rifle. On this one I'm using a metal lower.

Thanks Prince 50 for making this, it's a great set up.

Assaultplanet 01-11-2011 6:19 AM

Quote:

Originally Posted by tiger222 (Post 5594393)
Finally got a chance to fit on the P50 HK BB and I have to say I am very pleased.
I converted my featureless my HK13E clone

And installed the BB along with a target grip and special trigger pack (housing needs to be painted)

The snap ring fitting took a little while to get co-ordinated, (as I am not the adept at installing them yet) but everything else was a simple bolt on. Not only is it a full mechanical BB, but you don't have to cut the inside guide portion of polymer lowers as the lower does not keep the BB attached to the rifle. On this one I'm using a metal lower.

Thanks Prince 50 for making this, it's a great set up.

Sweet rifle! Thank you for posting the great pictures of the setup.

Thanks again,
Craig
www.bulletbutton.com

tiger222 01-12-2011 1:59 PM

Quote:

Originally Posted by Assaultplanet (Post 5596636)
Sweet rifle! Thank you for posting the great pictures of the setup.

Thanks again,
Craig
www.bulletbutton.com

You bet! Here is the rifle complete
http://i53.tinypic.com/wjx6s0.jpg

HS10B 08-10-2011 1:57 PM

Because of this thread, I got a couple of BulletButtons for my SP89 and HK43. After fiddling w/Radlocks on both, I was glad to have a product the HK's deserved. Top quality design and materials. Be sure to get the $5 tool for the snap rings.
Also, a big thanks to Darin for cleaning and installing the ten round limiters on both mag part kits. What a great company!


All times are GMT -8. The time now is 1:43 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.