Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Semiauto Rifles Gallery (http://www.calguns.net/calgunforum/forumdisplay.php?f=120)
-   -   20" AR's - Let's see 'em (http://www.calguns.net/calgunforum/showthread.php?t=364679)

rodeoflyer 11-18-2010 5:05 PM

20" AR's - Let's see 'em
 
Going through the AR galleries, it's 98% 16" barrels. I'm interested in 20's.

Jeffu 11-18-2010 5:23 PM

http://i567.photobucket.com/albums/s...imtalk/A42.jpg

http://i567.photobucket.com/albums/s...mtalk/oHai.jpg

http://i567.photobucket.com/albums/s...MNoveske-1.jpg

KaTooM 11-18-2010 5:40 PM

My Jungle Gun
 
http://img99.imageshack.us/img99/9150/dscn0629c.jpg

http://img717.imageshack.us/img717/1883/openp.jpg

Air Force M16A1 Colt 604 replica.

Veggie 11-20-2010 1:58 PM

Always loved this rifle. Maybe you could gimme it for xmas Jeffu :P

http://i567.photobucket.com/albums/s...imtalk/A42.jpg

BigBamBoo 11-20-2010 9:22 PM

............

Crazed_SS 11-21-2010 12:52 AM

http://i233.photobucket.com/albums/e...s/IMG_0963.jpg

kris&bela 11-21-2010 8:10 AM

2 Attachment(s)
Attachment 76051

Attachment 76052
My Simple Bushmaster 20".

AnimalMother 11-21-2010 9:13 AM

Quote:

Originally Posted by kris&bela (Post 5332023)
Attachment 76051

Attachment 76052
My Simple Bushmaster 20".

IKEA is now selling guns?!?!? j/k. :D

Standard 11-21-2010 10:44 PM

Sold this 20" a while back. I regretted it, so now I'm working on a new one :)
I think the 20" setup is my favorite.
http://i30.photobucket.com/albums/c3...K/PC280390.jpg

Standard 11-21-2010 10:45 PM

Quote:

Originally Posted by Jeffu (Post 5319803)

How do you like the BCM upper? I'm thinking of getting that for my next build.

den888 11-28-2010 6:15 PM

Nice AR's !!!

Kerplow 11-29-2010 10:38 PM

http://img.photobucket.com/albums/v1...L/100_6339.jpg

http://img.photobucket.com/albums/v1...L/100_6328.jpg

http://img.photobucket.com/albums/v1...L/100_6330.jpg

xrMike 11-30-2010 7:35 AM

http://img.photobucket.com/albums/v8...8resized-1.jpg

Lagduf 12-01-2010 4:34 PM

http://lagduf.com/wp-content/uploads...4270635622.jpg

Disgruntled Gunny 12-03-2010 4:44 PM

Before anyone asks "Why the hell did you do that?", I'll answer it. Simply, I've never seen another one like it. When talking with Jessie and Eric down at JD Machine, they told me about an idea, and I couldn't help myself, so I bit and did it.

What you're looking at below, is a standard JD Machine "multi cal" upper and lower in 5.56. both were cut and pulled from the batch prior to powdercoating, and were sent out for polish. They were hand-polished by a guy who builds custom rims for cars and trucks, and honestly, it came out better than i expected!

Parts List:

JD Machine 5.56 Upper w/ USMC logo on magwell
JD Machine 5.56 Lower
20" Bushmaster Stainless Steel barrel
20" YHM full-length Quad Rail
Sniper Grip
Harris Bipod & mount
Hawke-Frontier 8-32x50 (HK3372) scope
A.R.M.S. #19 Throw mount
DPMS lower parts kit
BCM Gunfighter charging handle
Magpul PRS AR10 (.308 for the extra 1" cheek relief)
Magpul trigger guard
Magpul RVG
Magpul B.A.D. Lever
Bullet Button for compliancy w/ the Republik of Kalifornia

Each picture has a link underneath to the full-size high-res photo so you can see the detail.

http://www.maapr.com/rifles/polished/web/DSC_0010.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0012.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0016.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0017.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0020.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0023.JPG
Hi-Res Link for above

Chuntsman949 12-03-2010 5:25 PM

Quote:

Originally Posted by JDaveUSMC (Post 5390680)
Before anyone asks "Why the hell did you do that?", I'll answer it. Simply, I've never seen another one like it. When talking with Jessie and Eric down at JD Machine, they told me about an idea, and I couldn't help myself, so I bit and did it.

What you're looking at below, is a standard JD Machine "multi cal" upper and lower in 5.56. both were cut and pulled from the batch prior to powdercoating, and were sent out for polish. They were hand-polished by a guy who builds custom rims for cars and trucks, and honestly, it came out better than i expected!

Parts List:

JD Machine 5.56 Upper w/ USMC logo on magwell
JD Machine 5.56 Lower
20" Bushmaster Stainless Steel barrel
20" YHM full-length Quad Rail
Sniper Grip
Harris Bipod & mount
Hawke-Frontier 8-32x50 (HK3372) scope
A.R.M.S. #19 Throw mount
DPMS lower parts kit
BCM Gunfighter charging handle
Magpul PRS AR10 (.308 for the extra 1" cheek relief)
Magpul trigger guard
Magpul RVG
Magpul B.A.D. Lever
Bullet Button for compliancy w/ the Republik of Kalifornia

Each picture has a link underneath to the full-size high-res photo so you can see the detail.

http://www.maapr.com/rifles/polished/web/DSC_0010.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0012.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0016.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0017.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0020.JPG
Hi-Res Link for above

http://www.maapr.com/rifles/polished/web/DSC_0023.JPG
Hi-Res Link for above



I coudlnt care less if any one talks **** on this rifle, this thing is fing SWEET!!! Like you said I have never seen anything close to this (execpt for the gold plated AKs the cartel had lol)

guns4life 12-03-2010 6:57 PM

Great job Jdave...looks like you won't need my garage buffer after all! :)

I really like the way that came out, makes me want to go polish some parts! haha

Disgruntled Gunny 12-03-2010 7:04 PM

Thanks for offering it! I was able to get it done by a pro, instead of doing a hackjob myself. :) I'm pretty pleased w/ how it turned out!

Agro 12-03-2010 7:15 PM

Quote:

Originally Posted by JDaveUSMC (Post 5390680)
Before anyone asks "Why the hell did you do that?", I'll answer it. Simply, I've never seen another one like it. When talking with Jessie and Eric down at JD Machine, they told me about an idea, and I couldn't help myself, so I bit and did it.

I would imagine that it will start to oxidize and you will lose that beautiful finish. It would take lots up upkeep. I think thats why people chrome or nickel plate so it stays nice, right?

guns4life 12-03-2010 7:37 PM

Quote:

Originally Posted by Agro (Post 5391426)
I would imagine that it will start to oxidize and you will lose that beautiful finish. It would take lots up upkeep. I think thats why people chrome or nickel plate so it stays nice, right?

I polish tons of my parts, never had a problem with anything becoming oxidized. The benefit is I can clean my parts with a dry rag, nothing sticks to the smooth surface..and they require very little oil. I suppose if you left the parts in the rain/outdoors it might be a problem, but if you shoot and clean your firearms there is nothing to worry about IME. Chrome and other plating takes a lot less time than hand polishing, I imagine that is a major factor in why it is preferred...but I have no real idea so don't quote me.

USMC Amtraker B311 12-03-2010 11:57 PM

Here's my 20 inch Noveske/ BCM rifle. Just got the scope the other day and chomping at the bit to get out to the range and zero it in.
http://i1091.photobucket.com/albums/...7/IMG_8362.jpg


http://i1091.photobucket.com/albums/...7/IMG_8360.jpg

Kerplow 12-04-2010 12:48 AM

i started a thread once asking if anyone had done a fully polished AR http://www.calguns.net/calgunforum/s...d.php?t=274237

i think you should go all the way and get that hand gaurd and stainless barrel polished too.

Geoff.T 12-04-2010 3:12 AM

BCM upper

http://farm5.static.flickr.com/4118/...251a5230_b.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._5960500_n.jpg

U5512 12-09-2010 11:20 PM

Love the rifle length...:D
http://i884.photobucket.com/albums/a...icture1204.jpg
http://i884.photobucket.com/albums/a...icture1234.jpg
http://i884.photobucket.com/albums/a...icture1232.jpg

pullnshoot25 12-10-2010 12:57 AM

Place holder for my future retro build.

Dr Rockso 12-10-2010 1:10 AM

Quote:

Originally Posted by guns4life (Post 5391544)
Chrome and other plating takes a lot less time than hand polishing, I imagine that is a major factor in why it is preferred...but I have no real idea so don't quote me.

Both anodizing and hard chrome plating greatly increase surface hardness, polishing doesn't.

hylander 12-10-2010 3:37 PM

I like It :cool:
I need details !



TMC 12-10-2010 6:19 PM

Not fancy but no bullet buttons :D

http://www.calguns.net/calgunforum/a...1&d=1292033881

Standard 12-11-2010 12:31 AM

Quote:

Originally Posted by USMC Amtraker B311 (Post 5392626)
Here's my 20 inch Noveske/ BCM rifle. Just got the scope the other day and chomping at the bit to get out to the range and zero it in.
http://i1091.photobucket.com/albums/...7/IMG_8362.jpg


http://i1091.photobucket.com/albums/...7/IMG_8360.jpg

Is that the burris? Let me know how you like it, I'm planning on getting the same one on my M16A4 clone.

SixPointEight 12-11-2010 12:39 AM

I like and support this thread. USMC Amtraker has almost exactly the rifle I want

rimfire78 12-11-2010 10:00 AM

http://i935.photobucket.com/albums/a...78/Kaiser2.jpg

Secret 12-11-2010 1:56 PM

Quote:

Originally Posted by JT1989 (Post 5429579)
I like and support this thread. USMC Amtraker has almost exactly the rifle I want

tell me about, that rifle looks AMAZING

USMC Amtraker B311 12-11-2010 6:28 PM

Thanks guys. Here are the specs for you to mull over...:

Upper: BCM A4 20in.
BCG/Bolt: BCM Auto
Charging Handle: BCM Gunfighter Mod 3
Forearm: Knights M5
Magpul AFG
Optic: Burris Ar-332 w/Aimpoint Kill Flash
BUIS: Matech GI 100-600yd flip up
Lower: Noveske N4 (custom engraved)
LPK: Rock River
Magpul B.A.D. Lever
Bullet Button: CA-15BS (Available here on the forums)
Grip: Magpul MIAD, OD Green (Probably gonna change out the back strap to a bigger one)
Magazine: Magpul Snubby 10rd.
Stock: A2, OD Green
GG&G Agency style Sling Keeper
Knights Armament Trigger Guard

My goal as I selected parts for this rifle was to have the battle rifle I had from the Marine Corps with some of my own enhancements. So far I have to say mission accomplished on that front. Still need to get out the the range though to try out that sight, I just got it the other day and haven't had the time to take her out and run her.

bombadillo 12-11-2010 6:38 PM

http://i95.photobucket.com/albums/l1...6876221390.jpg

Old pic, but a 20" either way.

Standard 12-11-2010 8:06 PM

Re: 20" AR's - Let's see 'em
 
USMC amtraker - how do you like the burris in place of the acog? It's what I'd probably going on top of my A4 clone.

Sent from my Samsung Captivate using Tapatalk.

hylander 12-11-2010 9:22 PM

No Bullet Buttons ?


Quote:

Originally Posted by TMC (Post 5427663)


pyro3k2 12-11-2010 10:13 PM

Quote:

Originally Posted by hylander (Post 5433345)
No Bullet Buttons ?

they could be RAW's or the photo was taken out of state.

USMC Amtraker B311 12-12-2010 1:26 AM

Quote:

Originally Posted by Standard (Post 5432971)
USMC amtraker - how do you like the burris in place of the acog? It's what I'd probably going on top of my A4 clone.

Sent from my Samsung Captivate using Tapatalk.


Never tried an ACOG, those are way out of my budget. Hell, it took me a year to get the rifle this far, lol! Maybe when I win the lottery I can slap a TA31RCOA4 on there and let you know, until then we'll see how the Burris handles. I am used to iron sights, this is my first optic, on an AR anyway.

rimfire78 12-19-2010 9:03 PM

http://i1091.photobucket.com/albums/...7/IMG_8362.jpg

this is sick!

USMC Amtraker B311 12-21-2010 8:31 AM

Thanks!


All times are GMT -8. The time now is 2:22 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.