Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Semiauto Rifles Gallery (http://www.calguns.net/calgunforum/forumdisplay.php?f=120)
-   -   Calgun's AR-15 Gallery (http://www.calguns.net/calgunforum/showthread.php?t=232935)

janus408 10-18-2009 10:11 PM

Calgun's AR-15 Gallery
 
Please do not post anything in this thread other than A) a side shot of your California Legal .223 Evil Black Rifle, B) a completed parts form as follows:

At the minimum:

Upper:
Barrel: (company, length, twist)
Lower:
Stock:
Magazine:
Use: (try and keep it concise, ie “paper shredding @ 200 yards”)

I encourage you to list anything attached to your rifle, some other ideas to include:

Trigger: (company, pressure)
Grip: (back, foreward if applicable)
Optics:
Sights:
Bipod:
Sling:
Light:
Paint:

ADDITION:
Quote:

Originally Posted by pacrimguru (Post 3285991)
right click on your post # found in the upper right hand corner of your post and copy shortcut. that link is just for your post. Add the link to your signature but rename it My AR Profile.




:nono: PLEASE DO NOT POST ANYTHING OTHER THAN THE ABOVE, FORMATTED IN THE WAY DESCRIBED ABOVE IN THIS THREAD. THIS IS MEANT AS A STRICT AR-15 GALLERY THAT INCLUDES NO DISCUSSION, IF YOU ARE CURIOUS ABOUT A RIFLE A MEMBER HAS SHARED WITH THE COMMUNITY PLEASE SEND THEM A PM. :nono:

KEEP CHATTER OFF THIS THREAD PLEASE

:cheers2: Now enjoy! :cheers2:

janus408 10-18-2009 10:13 PM

HK996's Rig
 
http://i16.photobucket.com/albums/b2...n/PA030008.jpg

Upper: Hk 416
Barrel: 14.5" barrel 1/7
Trigger: Timney 3lbs pull, AR10 hammer spring
Lower: Spikes
Mag Release: Raddlock
Grip: Hogue
Stock: Magpul CTS
Magazine: Pmag 10/20
Optics: Trijicon Acog TA31TRD
Use: Zombies.... and Angeles range paper at 100 and steel out to 600

janus408 10-18-2009 10:23 PM

Technique's Rig
 
http://i285.photobucket.com/albums/l...rrelcut001.jpg

Upper: Built by me...on Cerro forge
Bolt: MP LMT
Barrel: LMT, 1/7 twist, 14.5in M4 profile with OPS inc hider/collar combo for silencer mounting
Trigger: Swap between stock/ RRA 2 stage depending on what I'm doing.
Lower: Noveske (B) prefix so it is an LAR cut
Grip: MIAD and tango down forward grip
Stock: Vltor modstock / Milspec
Magazine: P-Mags
Optics: ACOG TA31F
Sights: Matech rear / standard FSB up front
Rail: Daniel Defense 7.0 lite rail
Sling: Vtac (not pictured
Other: Rail covers are Magpul XTM and ladder covers, Magpul B.A.D, Ambi safety selector. PRI gas busting charging handle.
Use: It gets dirty and shoots a lot. Mainly carbine classes. Some range use.

Cal-Irish 10-19-2009 1:30 AM

http://img131.imageshack.us/img131/4262/updateh.jpg

Upper: LMT (M&A)
Barrel: LMT .750 profile Midlength (M&A)
Lower: CMMG with Bullet Button
Stock: M4 6 position
Magazine: P-mag 10/20 and C-product 10rd
Use: Range work and home defense

Trigger: Standard
Grip: Standard A2
Sights:UTG dedicated match rear (holding zero like a champ)
Sling: DIY tac sling 3pt
FSB mount: CAA polymer rail with weaver low ring.
Light: Awaiting Fenix PD30
Muzzle Device: Standard

pontiacpratt 10-19-2009 8:52 AM

Pontiacpratt's AR
 
http://i119.photobucket.com/albums/o...f/P1020486.jpg
Upper:CMMG
Barrel: CMMG. WASP. 16" Carbine Length. 1/9 Twist
Lower: Grizzly-15
Stock: CAA CBS (Soon to be Magpul CTR)
Magazine: Bushmaster 10rd
Use: Paper Shredding/ Steel plate popping
Trigger: Double Star
Handguard: Magpul MOE
Grip: Doublestar (Soon to be Houge)
Optics: Vortex Strikefire 2x Red Dot
Sights: Fixed Front. Pro Mag BURS

fonionrings 10-19-2009 9:05 AM

http://i716.photobucket.com/albums/w...n/IMG_2033.jpg

http://i716.photobucket.com/albums/w...s/IMG_1926.jpg

http://i716.photobucket.com/albums/w...rent/mk121.jpg


1) Upper: Stag 2T, XTM covers
Barrel: 16" 1/9 twist CL
Lower: Stag, Stag LPK
Stock: Magpul CTR
Magazine: Pmag 10/30
Use: Primary
Optics: Aimpoint M2
BUIS: ARMS #40 LP
Grip: Magpul MOE
Vertical Grip: Tango Down

2) Upper: Spikes ST-22 w/ YHM spectre & fakecan
Barrel: 16" 1/16
Lower: Calguns lower, RRA LPK
Stock: Magpul ACS
Optics: Fakepoint
BUIS: MI flip ups
Grip: Magpul MOE
Vertical: Generic

3) Upper: POF 415x Piston w/ Predator Rail
Barrel: 9.5" 1/8
Lower: Anvil Arms pistol lower
"Stock": CAA saddle
Optics: EOTech 512 w/ GG&G flip-up covers
BUS: Magpul BUS
Grip: Magpul MOE
Etc: KAC Handstop
Light: Fenix Tk11

4) Upper: WOA receiver, KAC 12" FF RAS
Barrel: 18" WOA 1/7 w/ OPS Inc 12th brake & collar
Lower: Calguns lower w/ RRA LPK
Trigger: RRA 2 Stage NM
Stock: Magpul ACS
Grip: Magpul MOE
Sights: Leupold mk. 4 LR/T 3.5-10x M3 (illum) on LT-104 mount
Etc: ARMS #32 adapter w/ Harris bipod

Barbarossa 10-19-2009 9:14 AM

** better pic to follow **

http://lh5.ggpht.com/_ExDKsKlG_P4/Sa...0/IMG_0130.jpg
http://lh6.ggpht.com/_ExDKsKlG_P4/TD...800/photo1.jpg
http://lh4.ggpht.com/_ExDKsKlG_P4/TD...800/photo2.jpg
http://lh3.ggpht.com/_ExDKsKlG_P4/TD...s800/photo.jpg
http://lh5.ggpht.com/_ExDKsKlG_P4/TD...800/photo3.jpg

Upper: Spike's Tactical 16" M4 CL
Barrel: (CMMG, 16", 1:7)
Lower: CMMG MOD4SA
Stock: FDE MOE
Magazine: PMag - Cproducts
Use: Range Duty, Prairie Dogs,

Trigger: Stag LPK
Grip: FDE MOE
Optics: Vortex Viper 6.5-20x50 PA Riflescope
Sights: Troy BUIS

tomd1584 10-19-2009 2:16 PM

My Carbine.
 
Upper: LMT
Barrel: LMT, 14.5", 1/7 twist chrome lined.
Flash Hider: Battlecomp 1.5
Charging Handle: LMT tactical charging handle
BCG: LMT (pre-mim) full auto, BCM extractor upgrade kit.
Rail: Daniel Defense 12.0 Lite, FDE
Sights: MBUS front & rear
Optic: ACOG- TA45-2 with Larue mount
Lower: CMMG
Maglock: CAL15 BS
LPK: Daniel Defense
Trigger: ALG defense ACT
Stock: SOPMOD on CMT receiver extension.
Buffer: H1 buffer
Grip: Magpul MOE
Magazine: PMAG
Use: Carbine classes (5), jack of all trades go-to carbine.
Current Round Count: 8,600 approx. (6-2012)


http://i737.photobucket.com/albums/x...IMG_1036-1.jpg

Davidoff 10-20-2009 3:15 AM

Upper: RRA
Barrel: RRA 16" Midlength CL 1/9 twist.
BCG: BCM Complete BCG
Lower: Kaiser Defense
Stock: M1S A1 Stock
Magazine: C-Products 10rd
Trigger: RRA 2-stage NM trigger
Grip: Magpul MIAD basic
Sights: Matech 600m BUIS
Sling: Vikings Tactics 2-Point Padded Sling
Optic: Primary Arms Gen2 Microdot


http://i75.photobucket.com/albums/i2...f/CIMG2296.jpg

pTa 10-21-2009 8:30 PM

http://i73.photobucket.com/albums/i2...BengalAR15.jpg
interesting note; came with M4 handguards, but I like CAR guards instead
use; desimating coke cans at 40 yards, milk jugs at 100 yards

sspen003 10-21-2009 9:49 PM

Upper: DPMS M4 Flat top
Barrel: DPMS 16 inch 1:9
Lower: MEGA
Stock: DPMS PARDUS
Magazine:ProMag
Rail: MI Carbine Length 2 Piece
Optics: ACOG TA50-2 w/ La Rue Mount
Sights: Matech
CH: BCM GUNFIGHTER
Sling: Viking Tactics 2 point w/ Lamb Mount
Muzzle Device: Troy Medieval Muzzle Brake
Trigger Guard: Magpul enhanced trigger guard
Use: Destroying Pumpkins, Competition


http://i639.photobucket.com/albums/u...3/DSC00138.jpg
http://i639.photobucket.com/albums/u...3/DSC00139.jpg

Freagan 10-21-2009 10:31 PM

http://img.photobucket.com/albums/v7...0/CIMG1508.jpg

Upper: Sabre Defense M5
Barrel: 16" 1:7 twist
Lower: Smith & Wesson
Stock: CTR milspec
Magazine: pmags
Use: “paper shredding @ 200 yards”


Trigger: RRA Two Stage Match
Sling: None yet
Light: None yet
Paint: None

dieselpower 10-24-2009 4:21 PM

http://i655.photobucket.com/albums/u...acsstag-15.jpg

Stag-15 OLL
RRA LPK
BCM BCG
CMMG upper
Armalite 16"
Magpul ACS
C-More ATAC
GG&G Railed HG
KAC VFG

Linus 10-28-2009 11:18 AM

http://i248.photobucket.com/albums/g...0/DSCF0360.jpg
Sundevil Lower
RRA 2-stage triger
CMMG 18" upper; SS 1:8" chambered in 5.56
POF brake
Daniel Defence Lite rail 12"
YHM lo-pro gas block
Magpul XTR pannels
Magpul MIAD grip
Stag A2 stock
Burris XTR rings
Falcon Menace 4-14x44mm FFP
C-prod mag
Harris Bipod non-swivel

NTIMID8 10-30-2009 8:56 PM

http://pic80.picturetrail.com/VOL199.../377020999.jpg

Complete Upper: Wilson Combat Stainless 20", 1:9 twist
Free Floating Rails: YHM
Flash Suppressor: YHM
Lower: Rock River Arms
Trigger: Rock River Arms
Trigger Guard: Magpul
B.A.D Lever: Magpul
Extended Take Down Pins: Brownells
Bullet Button: Yes
Stock: ATI
Buffer tube & Spring: Brownells
Magazine: XTA Tactical Systems 9rd
Grip: CAA Back, CAA Forward
Optics: AIM 2.5-10 x 40 w/ day & Night
Sights: None at this time
Bipod: Harris "not in photo"
Light: AMP Laser/Light Combo
Use: Home Defense & Target

vinny_land 10-30-2009 10:31 PM

http://i25.photobucket.com/albums/c8...r/IMG_5941.jpg
Upper: BCM complete upper
Barrel: BCM 16'' midlength government profile
BCG: BCM complete upgraded bolt
CH: BCM MOD4 Gunfighter
Flash: standard A2 birdcage
Handguard: standard midlength (will upgrade later w/ DD Lite Rail)
Lower: Superior Arms OLL
Stock: Magpul MOE w/ assembly
Magazine: Magpul PMAG 10/30 (waiting for UPS delivery)
LPK: Armalite
Trigger: standard
Bullet Button: Prince50 BB w/ FreeLock Mini Kit
Grip: standard A2 grip (upgrading to Magpul MOE waiting for UPS delivery)
Front Sight: standard A2 front post
Rear Sight: GG&G A2 BUIS
Sling: Magpul MS2 w/ ASAP (waiting for UPS delivery)
Light: none (probably Surefire)
VFG: none (probably Tango Down w/ QD)
Optic: none (probably Aimpoint M4 or Micro)
Uses: range, plinking, SHTF

50CalAL 10-31-2009 1:26 AM

http://farm4.static.flickr.com/3323/...851165be_b.jpg
Upper: S&W M&PT
Barrel: 16" 1:9 Twist
Lower:
S&W M&PT
Stock: S&W Telescoping Stock
Magazine: D&H Black Teflon Rebuild
Sights:
Troy BUIS
Bipod:
Harris
Rail:
Troy
Mag Lock:
Bullet Button
Use:
SHTF, Zombies, plinking @ 100-300yds

Rockhound 11-01-2009 5:53 PM

First Build
 
2 Attachment(s)
Here are some pix of my first build. Spent extra on was the Rock River LPK, I liked the grip and trigger pull.

CMMG Lower
Rock River Match Grade LPK w/Ergo Grip
DPMS mil spec stock assembly
Foregrip Fab Defense T-Pod
Magpul 20/10 Mag w/Magpul Loop Mag Assist
Badger Ordnance Gen II Tactical Latch
Yankee Hill Upper w/
* Mil. Spec. Forged 7075-T6 Aluminum YHM Flat Top Upper Receiver
* Forward Assist
* Mil. Spec. Bolt Carrier Assembly
* 16" Chrome-Moly Vanadium Steel Barrel, Heat Treated to RC 25-32
* Chambered in 5.56 N.A.T.O., Chrome-Lined with a 1:7" Twist
* YHM Diamond Fluting Improves Rigidity and Aids in Barrel Cooling
* YHM Phantom 5C2 Flash Hider / Compensator
* YHM Specter Length Diamond Handguard
* YHM Forearm Endcap
* YHM Low Profile Gas Block
* YHM Forearm Mounted Flip Front Sight
* YHM Flip Rear Sight

Attachment 36750

Attachment 36751

dskell 11-02-2009 12:33 AM

Upper:Stag 2H
Barrel: Stag 16", 5.56 NATO, 1:9"
Lower:Stag-15 w/CMMG LPK
Stock: DPMS? Commercial Spec 6pos.
Magazine:Magpul PMAG FDE 10/30, Promag 10/20.
Grip: Magpul MIAD FDE
Sights: UTG Detachable Carry Handle
Use: Target/Zombie shredding.

http://i127.photobucket.com/albums/p...DSC_1471-2.jpg

http://i127.photobucket.com/albums/p...DSC_1472-2.jpg

SoCalRandy 11-12-2009 4:12 PM

First Build
 
http://i232.photobucket.com/albums/e...95modified.jpg


http://i232.photobucket.com/albums/e...88modified.jpg


Upper: No brand name, Government surplus?
Barrel: Hi Standard, 14.5", pinned Vortex flash hider, chrome lined, 1:7 twist
Lower: Kaiser Defense KR5
Stock: Magpul CTR
Magazine: Magpul 10/30 with Ranger Plates
Use: Range, plinking and HD
Trigger Guard: Magpul MIAD Enhanced Trigger Guard
Pistol Grip: Command Arms Accessories UPG16
Vertical Forward Grip: Command Arms Accessories FFG2
Optics: Eotech 512 with GG&G Lens covers
Sights: Midwest Industries BUIS
Sling: Magpul MS2
Rear Sling Mount: Magpul ASAP sling plate
Forward Sling Mount: CQD-FSM
Light: Surefire G2 LED mounted on La Rue LT 707-1
Handguard: Daniel Defense Omega 7.0 with ladder rails
Charging Handle: Badger Ordnance Tactical
Bolt Assist Device: Magpul BAD

ZepoL 11-18-2009 2:55 PM

Well, I finally finished my first AR just the way I wanted. Here she is:

http://i16.photobucket.com/albums/b2...k/DSC00080.jpg

Upper: Stag 2HT
Lower: Kaiser Defense CalGuns state with Rock River Arms lower parts kit
Grips: Ergo Ambi pistol grip; Tango Down vertical grip
Stock: Magpul MOE
Scope: ACOG TA31 replica
Magazine: Magpul Pmag 10/30
Accessories: Magpul trigger guard, Yankee Hill carbine sling adapter, bullet button

bigboy 11-18-2009 6:29 PM

MY FIRST BUILD
 
3 Attachment(s)
UPPER: MEGA BILLET UPPER GEN 2
LOWER: MEGA BILLET LOWER GEN 2
BARREL: CMMG 16 INCH 1/7 TWIST 5.56MM
STOCK: VLTOR MODSTOCK
MAGAZINE: PMAG 10/30
USE: TARGET SHOOTING/HOME DEFENSE AGAINST ZOMBIES AND ETC...
TRIGGER: RRA 2 STAGE NM
GRIP: MAGPUL MIAD
FLASH HIDER: SMITH ENTERPRISES VORTEX
RAIL: VLTOR CASV-EL
OPTICS: ACOG TA31 (REPLICA)
SIGHTS: ARMS 40L BUIS
LIGHTS: UNKNOWN WITH CAA LIGHT MOUNT
CHARGING HANDLE: MEGA BILLET WITH BADGER ORDINANCE TAC LATCH
GAS PISTON: OSPREY DEFENSE OPS-416 GAS PISTON KIT
VERTICAL COMBAT GRIP:
UTG FIVE POSITION WITH BATTERY COMPARTMENT
RECEIVER END PLATE:GGG AMBI SLOT SLING END PLATE

KNS GEN 2 HAMMER/TRIGGER ANTI ROTATION KIT

pacrimguru 11-22-2009 8:14 PM

http://i277.photobucket.com/albums/k...x/299cb5e0.jpg

Upper: KAC SR 15 E3 IWS
Barrel: KAC 16", 1/7 twist, Mid-Length Gas System
Rail: KAC URX II Rifle Length
- KAC Triple Tap Muzzle Brake
- KAC E3 Bolt Carrier Group
- VLTOR/BCM Gunfighter Mod.4 Charging Handle
- KAC Low Profile Gas Block
- KAC Micro 200-600 Rear BUIS
- KAC Handstop
- VTCS Custom Stippled KAC Rail Panels

Lower: Spike's Tactical Jolly Rogers CJ-15
- USGI Standard Trigger (6-8 lb. pull, not sure)
- Ambi Selector
- Magpul MIAD Grip Full Kit
- Magpul B.A.D.
- Magpul ASAP
- KNS Non-Rotating Trigger and Hammer Pins
- Prince50 Bullet Button (CA Compliance Part)
- Prince50 Extended Take Down Pin

Stock: LMT SOPMOD Gen. 2
- VLTOR Five-Position Receiver Extension
- Standard Carbine Buffer
- Standard Carbine Buffer Spring


Magazine: Magpul PMag (CA Compliant 10/30)

Optic: Aimpoint Micro T-1 on KAC T-1 Mount

Light: Surefire X300 with XT07 Remote Switch

Paint: None

Sling: Magpul MS2 Single Point Sling

Use: Shooting at 0-100 yards, Tactical Carbine Classes

Weight: 8lbs. 2oz. (with unloaded magazine attached)


------------------------------------------------------------------------------


http://i277.photobucket.com/albums/k...P/81de3d90.jpg

Upper: LMT MRP
Barrel: LMT MRP 16", 1/7 twist, Mid-Length Gas System
Rail: LMT MRP Rifle Length
- AAC 51T Fast-Attach M4-2000 Muzzle Brake
- LMT Semi-Auto Bolt Carrier Group
- VLTOR/BCM Gunfighter Mod.4 Charging Handle
- KAC M4 Flip-Up Front Sight
- KAC Micro 300 Rear BUIS
- Magpul AFG
- Valk/Tac "GIT-R DONE" Ejection Port Cover
- TangoDown Rail Panels

Lower: LMT Defender 2000
- USGI Standard Trigger (6-8 lb. pull, not sure)
- Ambi Selector
- Magpul MIAD Grip Full Kit
- Noveske QD End Plate
- LMT Heavy Duty QD Push Button Swivel
- Phase 5 EBRv2
- KNS Non-Rotating Trigger and Hammer Pins
- Prince50 Bullet Button (CA Compliance Part)
- Prince50 Extended Take Down Pin

Stock: LMT SOPMOD Gen. 1
- KAC M4 Sliding Buttstock Mount
- MilSpec Receiver Extension
- Standard Carbine Buffer Spring

- H1 Carbine Buffer

Magazine: Magpul PMag (CA Compliant 10/30)

Optic: Aimpoint Micro T-1 on LaRue Tactical T-1 Mount

Light: Surefire X200A with XT07 Remote Switch

Paint: None

Sling: Magpul MS2 Single Point Sling

Use: Shooting at 0-100 yards, Tactical Carbine Classes

Weight: 9lbs. 2oz. (with unloaded magazine attached)


------------------------------------------------------------------------------


http://i277.photobucket.com/albums/k...R/02791b6c.jpg

Upper: VLTOR MUR-1S
Barrel: WOA 18" Stainless Steel, Match Grade, SPR Profile, 1/7 twist, Rifle-Length Gas System
Rail: SWS Rifle Length
- OPS INC 12th Brake and Collar
- Bushmaster M16 Bolt Carrier Group
- VLTOR/BCM Gunfighter Mod.4 Charging Handle
- PRI Front Flip Sight and Gas Block
- KAC 200-600M Flip-Up Rear Sight
- Bobro Vertical Short Fore Grip
- VTAC LUSA Sling Mount
- TangoDown Rail Panels

Lower: Tactical Innovations T15
- Geissele SSA 2-Stage Trigger (rated at 2.5lbs. first stage/2.0lbs second stage)
- Ambi Selector
- Magpul MIAD Grip Full Kit
- Noveske QD End Plate
- LMT Heavy Duty QD Push Button Swivel
- Magpul B.A.D.
- Prince50 Bullet Button (CA Compliance Part)
- Prince50 Extended Take Down Pin

Stock: VLTOR EMOD
- MilSpec Receiver Extension
- Standard Carbine Buffer Spring

- H1 Carbine Buffer

Magazine: Magpul Stubby PMag with Ranger Plate (CA Compliant 10 rnd.)

Optics:
- Schmidt Bender PMII 4–16 x 42 LP in LaRue LT-104 Mount with Cat Tail Throw Lever
- JPoint Micro-Reflex Sight in Matt Burkett Offset Mount

BiPod: VLTOR ModPod

Light: None

Paint: None

Sling: Viking Tactics Wide Padded 2 Point Sling

Use: Shooting at 100-600 yards

Weight: 12lbs. 4oz. (with unloaded magazine attached)


------------------------------------------------------------------------------


http://i277.photobucket.com/albums/k...e/43dd3486.jpg

Upper: Noveske/VLTOR VIS-3-AK
Barrel: Novekse 16" Recon SS, 1/7 twist, Mid-Length Gas System
Rail: Noveske/VLTOR Rifle Length VIS-3-AK
- KAC Triple Tap Muzzle Brake
- Full Auto Bolt Carrier Group
- Noveske/VLTOR Low Profile Gas Block
- VLTOR/BCM Gunfighter Mod.4 Charging Handle
- KAC Micro Flip-Up Front Sight
- KAC Micro 200-600 Rear BUIS
- Magpul AFG
- VTAC LUSA Sling Mount
- Magpul Rail Ladders

Lower: Noveske N4
- Chip McCormick Single Stage Drop-In Trigger (between 3.5-4 lb. pull)
- Ambi Selector
- Magpul MIAD Grip Full Kit
- Magpul B.A.D.
- KNS Non-Rotating Trigger and Hammer Pins
- LMT Heavy Duty QD Push Button Swivel
- Prince50 Bullet Button (CA Compliance Part)
- Prince50 Extended Take Down Pin

Stock: Magpul M93B
- H1 Carbine Buffer

Magazine: Magpul PMag (CA Compliant 10/30)

Optic: Schmidt Bender Short Dot PMII 1.1-4 x 20 in LaRue LT-104 Mount with Cat Tail Throw Lever

Light: None

Paint: None

Sling: Viking Tactics Wide Padded 2 Point Sling

Use: Shooting at 0-300 yards

Weight: 10lbs. 6oz. (with unloaded magazine attached)

Mute 11-30-2009 2:25 PM

http://farm4.static.flickr.com/3508/...e950d98c_b.jpg

Upper: Noveske Light Carbine Low Profile (complete upper)
Lower: CMMG
Stock: Magpul ACS
Magazine: Pmag 10/20
Use: General purpose rifle

LPK LMT
Grip: Ergo Suregrip
Optics: Aimpoint Comp C3
Optic Mount Bobro Engineering 150
Sights: Magpul MBUS (front and rear)
Light: Jetbeam RRT2 Raptor
Vertical Grip Bobro Engineering Shorty

Linkpimp 12-03-2009 9:48 PM

My Cal legal .50 cal Beowulf
 
Well it’s got a Calgun lower, its a black style and is the same size as an AR so this is a valid entry (right) :D


http://i264.photobucket.com/albums/i...IMG_5187-1.jpg

http://i264.photobucket.com/albums/i...IMG_5096-2.jpg



Here is what two cinderblocks look like after one 400gr round

http://i264.photobucket.com/albums/i...edFrame1-1.jpg


See the video here:
http://www.youtube.com/watch?v=rFd4UjUI5Mg

Upper: Alexander Arms
Barrel: 16”
Lower: Calguns lower # (250ish)
Magazine: Alexander Arms 10rd of .50 or 30 rounds of 223 / 556
Use: Home & family protection.

Flogger23m 12-04-2009 11:13 AM

http://img682.imageshack.us/img682/508/arwsights.th.jpg

http://img682.imageshack.us/img682/6...tslarge.th.jpg

http://img682.imageshack.us/img682/3995/dda15.th.jpg

Upper: CMMG Mid length
Barrel: 16", 1/7 twist, .223 (might be 5.56, have not checked)
Lower: LAR Grizzly Multical
Stock: DPMS A2 stock
Magazine: Pmag 10/30 black windowed
Sights: Daniel Defense A1.5 fixed rear sight
LPK: DPMS
Other: Enhanced AR-15 rear take down pin? Not sure what it is called, but it can be seen in my last pic. Overall nice, easier to pull out but would get in the way for an ambi safety. Came with the rifle.

Use: Slaughtering paper and dirt

CK1 12-07-2009 7:32 PM

Finally
 
1 Attachment(s)
Upper: VLTOR - MUR 1A
w/ CMMG Bolt Carrier & Badger Gen 2 Tactical
Barrel: BCM 18" Chrome-Lined 1/8 Twist w/ Midwest Low Pro Gas Block
Flash Hider: Smith Vortex
Lower: Mega
Stock: MagPul - MOE
Magazine: P-Mag 10/20
Use: Don't know but I'm gonna find out this weekend.
Rail: Daniel Defense 12.0 Lite-Rail
Optics: Aimpoint Clone 3x Magnifier & Primary Arms Red-Dot

hamster 12-12-2009 10:03 PM

http://i265.photobucket.com/albums/i...hamstergun.jpg
Upper: Sabre Defence M4 Carbine 16"
Barrel: Sabre Defence 1:7 twist
Lower: Kaiser Defense
Stock: Magpul ACS, BCM H2 buffer and Mounting Kit
Magazine: Magpul 10/30 with a Magpul
Use: Fun, SHTF
Trigger: from CMMG LPK
Grip: Magpul MIAD
VFG: UTG Smart Foregrip
Optics: L3 EOTech 552.A65 Rev F
Sights: Matech BUIS
Handguard: Midwest Industries MCTAR-17, Magpul Rail covers

NiteQwill 12-12-2009 11:12 PM

http://www.sk8ng.com/dusty/wp-conten...2/IMG_4961.JPG

Upper: Cerro Forge
Barrel: 16" 5.56 Bravo Company BFH with PWS FSC556 in 1:7 twist
BCG: Forged BCM /w Gunfight MOD 4 CH
Handguard: Daniel Defense 12.0" Lite in Dark Earth
Lower: Kaiser Defense /w Magpul BAD Lever
Stock: Magpul CTR milspec /w standard buffer & spring
Magazine: PMAG or USGI (depends on use)
Use: Carbine/Tactical drills & classes, SHTF

Trigger: Geissele SSA /w Magpul enhanced trigger guard
Grip: Magpul MOE & LaRue UDE FUG
Optics: Trijicon ACOG TA31F
Sights: Troy BCM front & rear BUIS
Sling: LaRue 2-point QD
Rail panels: Magpul UDE XTM
Paint: UDE (urban dark earth)

Booshanky 12-21-2009 4:09 PM

My AR.
 
Upper: CMMG 14.5 Inch M4A1 SOCOM upper
Barrel: Heavy Barrel. 1/7 twist
Lower: Stag 15
Stock: Cheap 6 Position stock from TheTic00 at arfcom.
Magazine: Magpul Pmag and some Stainless STANAG mags.
Trigger: Stock Stag LPK
Grip: Magpul MIAD. Random VFG
Optics: EOTECH 512 with GG&G Flip covers
Sights: GG&G Front and rear spring loaded BUIS
Sling: Blackhawk SWIFT sling/
Light: Fenix TK10
Light Mount: Daniel Defense offset mount with thumb screw.
Paint: Anodized.
Bolt: EGRESS Bolt Upgrade. Full auto carrier. Extended/Polished ramps.
Gas Block: YHM Low Profile.
Rail: YHM Lightweight Spectre length free float rail.
Rail Covers: Magpul Ladder style.
Flash Hider: YHM Phantom 5C2
Bolt Catch Assist: Magpul BAD.
Bullet Button: Freelock

Use: Zombie Defense. 3 Gun comps. Neighborhood watch after the impending financial collapse.

http://lh3.ggpht.com/_4bf9tmqvjjY/Sz...0/IMG_1611.JPG

Jim_KT 12-21-2009 6:13 PM

http://i300.photobucket.com/albums/n...g/IMG_3827.jpg


Bottom Gun (primary)
Upper: LMT
Barrel: LMT, 16", 1/7 twist chrome lined.
Flash Hider: A2
BCG: Denny's Super Duty AR15 BCG
Charging Handle: BCM Gunfighter Mod4
Rail: Daniel Defense Omega 7.0 w/Ergo ladders
Sights: Magpul MBUS
Optic: Aimpoint T1
Optic Mount: LaRue LT660 Tall
Lower: Bushmaster RAW
LPK: Stag/CMT w/Magpul BAD
Stock: LMT SOPMOD on Henderson Defense receiver extension, VLTOR components
Buffer: LMT H1 buffer
Grip: Magpul MIAD w/spare Colt bolt w/BCM spring upgrade
Magazines: Any and all in my stable
Sling: Viking Tactics MK2
Light: Surefire X200
Use: All around shooting, carbine classes, training/drills, etc..


Top Gun (secondary)
Upper: LMT
Barrel: LMT, 16", 1/7 twist chrome lined.
Flash Hider: A2
BCG: LMT AR15 BCG
Charging Handle: BCM Gunfighter Mod4
Rail: Daniel Defense Omega 7.0 w/Ergo ladders
Sights: Troy
Optic: Aimpoint ML2
Optic Mount: LaRue LT129
Lower: Olympic Arms RAW
LPK: Stag/CMT
Stock: LMT SOPMOD on Stag/CMT receiver extension.
Buffer: LMT H1 buffer
Grip: Magpul MIAD w/spare Colt bolt w/BCM spring upgrade
Magazines: Any and all in my stable
Sling: Viking Tactics MK2
Light: Surefire X200
Use: All around shooting, carbine classes, training/drills, etc..

SLYoteBoy 12-21-2009 7:15 PM

http://i30.photobucket.com/albums/c3...N/IMG_0029.jpg

Upper: BCM
Rail: DD Lite 9
Barrel: BCM , 16" M4 Profile , 1/7 twist
BCG: LMT
Lower: Stag
Stock: Magpul MOE
Magazine: Cproducts 10rd
Use: Truck Gun , Plinking , Steel/Paper Killer , Spotlighting Rifle , General Use
Trigger: DPMS , factory
Grip: Magpul MOE FDE
Optics: EOtech 512
Sights: Troy Ind. Flipup front and rear FDE
Bipod: Harris with LaRue QD
Sling: MS2 and ASAP plate
Forearm: Magpul Rail Covers FDE
Flash Hider: YHM Phantom 4port

Rukus 12-29-2009 12:52 PM

Version 2.0
http://i3.photobucket.com/albums/y57...e/P1150668.jpg
Upper: DD A4 w/ M4 Feedramps
Barrel: 16″ Cold Hammer Forged, 5.56 NATO Chamber, 1:7, Chrome Lined
Flash Hider: A2 Birdcage
BCG: F/A BCG, HP and MPI Tested, Shot Peened Bolt, Extractor Booster, Properly Staked Gas Key by Daniel Defense
Rail: Daniel Defense Omega X 12.0 FSP
Sights: Daniel Defense A1.5 rear, F marked FSB
Optic: None at the moment
Lower: Kaiser Defense-Calguns State Outline
LPK:M&A Parts w/ Ambi selector added and Gen. 2 Raddlock (FDE)
Trigger: Factory
Stock: Magpul CTR, OD Green on Stag receiver extension. Magpul ASAP.
Grip: Magpul MOE, OD green
Magazine: Magpul 10/30's and C-products 10 round (not pictured)
Other: Magpul Enhanced Trigger Guard, AFG, and XTM Panels, ERGO Rail Ladders
Use: Zombie Apocalypse....and hopefully a tactical carbine class by end of '10

xaaronx 12-31-2009 3:24 PM

http://i50.tinypic.com/15gqezm.jpg
http://i46.tinypic.com/2nitm9u.jpg
http://i45.tinypic.com/8yz1o3.jpg
http://i45.tinypic.com/t8tdvp.jpg

http://i50.tinypic.com/szg5g8.jpg

LMT MRP 16'' 1/7
Doublestar lower
DPMS Mangonel BUIS
Magpul Miad
Tangodown stubby
ACE ARFXE Stock
VLTOR Light mount
Surefire G2
AAC Blackout FH
Trijicon Tripower w/ wilcox mount
LMT BCG/Charging handle
Magpul Pmag 10/30
Use- Short to medium range engagements

8200rpm 01-09-2010 8:47 PM

http://img130.imageshack.us/img130/8302/n4car.jpg

Upper: Noveske N4 Light Carbine Low Profile
Barrel: N4 14.5" Cold Hammer Forged, 1 in 7" twist, Mil-Spec M249 Machine Gun barrel steel with heavy M249 Chrome Lining, 5.56mm chamber
Flash Suppressor: AAC M4-2000 51T Flash Hider/Suppressor Mount (pinned and welded)
Optics: Trijicon ACOG TA33R-8 (3X Magnification w/ Red Chevron BDC) w/ LaRue LT-105 Mount
Sights: Troy/Noveske M4-style Front and Rear BUIS
Lower: Bushmaster XM15-E2S (RAW)
Trigger: RRA NM Two Stage
Grip: Magpul MOE
Stock: Magpul CTR Mil-Spec
Sling: BFG Vickers Combat Applications Sling
Additions: ProMag Rail Covers, Magpul Battery Assist Device
Use: Poodle management

Cpl. Haas 01-09-2010 11:19 PM

http://img685.imageshack.us/img685/3862/img1785f.jpg

Upper: Rock River Arms Entry Tactical
Barrel: R-4 16" Wilson Chrome Moly, 1:9 Twist 5.56mm
Flash Suppressor: A2 Flash Hider
Optics: EOTech Model 512.A65 w/ RRA Dominator Mount
Sights: Standard Front; RRA Dominator Rear
Lower: Rock River Arms LAR-15
Trigger: RRA Standard
Grip: Standard
Stock: RRA 6-Position Tactical
Light: Surefire M500A WeaponLight
Sling: 3-Point Tactical (Not Pictured)

Use: Target practice, personal defense, and tactical carbine matches.

Future Upgrades:
- Magpul MOE Grip
- Magpul CTR Stock
- Magpul MS2 Sling w/ ASAP Mount

Gio 01-10-2010 12:01 AM

http://i69.photobucket.com/albums/i6...R/IMG_2621.jpg

Upper: Stag 2H Carbine
Barrel: Stag 16" 1/9 5.56 Chrome Lined Gov't Profile with Miculek Compensator
Lower: Sun Devil
Stock: Magpul CTR
Magazine: Magpul E-Mag

Use: Killing Paper Zombies

Trigger: RRA Single Stage
Grip: MIAD with Solar Grip Wrap
Optics: EOTech 552 w/ La Rue Po Boy
Sights: Magpul MBUS
Bipod: N/A
Sling: Magpul MS2 (Not Shown)
Light: N/A
Paint: N/A

Future Upgrades:
Magpul BAD Lever

fmfcorpsman 01-10-2010 9:15 AM

http://i81.photobucket.com/albums/j2...Picture023.jpg
http://i81.photobucket.com/albums/j2...Picture016.jpg
http://i81.photobucket.com/albums/j2...r/ggggaswe.jpg

djleisure 01-12-2010 3:23 PM

http://i1006.photobucket.com/albums/...e/IMG_7858.jpg

Upper: DD M4
Bolt: DD s/a
Barrel: DD CHF 1/7 twist, 16in M4 profile
Trigger: RRA 2 stage
Lower: Mega Gator - MULTI cal
Grip: FDE Magpul MOE
Stock: FDE Magpul CTR
Magazine: P-Mag w/ Magpul
Optics: EoTech 5.12
Sights: FDE Magpul Mbus rear
Rail: Daniel Defense Omega X 12.0 FSP
Sling: Vtac
Rail covers: FDE Troy and FDE Magpul rail ladders
VFG: Magpul AFG

818gtiguy 01-21-2010 8:34 PM

http://i659.photobucket.com/albums/u...1264134055.jpg

Upper:BCM
Barrel:BCM Middy,1/7 twist
Rail:LaRue 13.2
Charging handle:BCM Gunfighter Mod.4
Lower: CMMG MOD4SA
Stock: LMT SOPMOD w/Ceracoated Flat Black LMT buffer tube/receiver extension
Mag:10/30 PMAG M
Trigger:Tuned USGI by Bill Springfield 4.5lbs
Optics: Aimpoint T-1 w/LaRue mount
Sights: TROY BUIS front and back
Sling: Gear sector 2P


All times are GMT -8. The time now is 4:32 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.