Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   Optics, Mounts, Rails and Sights (http://www.calguns.net/calgunforum/forumdisplay.php?f=90)
-   -   Throw Lever for a Primary Arms 1-6x24 (http://www.calguns.net/calgunforum/showthread.php?t=1131088)

Seaweed02 11-05-2015 8:45 PM

Throw Lever for a Primary Arms 1-6x24
 
Hello. I have just ordered a Primary Arms 1-6x24 scope for my 300 BLK Rifle. I haven't received it yet, it is still in the mail. But I was wondering about a throw lever for easy magnification changes. Does anyone have any recommendations for this scope?

PrimaryArms 11-06-2015 7:32 AM

Please Email info@primaryarms.com

Seaweed02 11-06-2015 8:22 AM

OK
 
Quote:

Originally Posted by PrimaryArms (Post 17177369)


OK, I emailed with the same question. I had already been on your website before posting this thread though. Although I found a throw lever for this scope on your website, it is not in stock at this time. Hopefully someone at PA will be able to suggest an alternative throw lever that will fit this scope. Thank you for the response.

essjay 11-06-2015 5:35 PM

I had a throw lever for mine, during the brief period I owned one. It broke on install - very poor quality plastic. Almost like nylon.

Seaweed02 11-13-2015 9:06 AM

Bought one from a Calguns Member
 
I found one that a Calguns Member makes out of 6061-T6 Aluminum, the same material that most lower receivers are made out of. It is hard anodized black and fits perfectly on this Primary Arms 1-6x24 Scope:
[IMG]https://farm6.staticflickr.com/5797/...60fa9a87_k.jpgThrow Lever 2 by carllovett, on Flickr[/IMG]
[IMG]https://farm1.staticflickr.com/656/2...b9db9592_k.jpgThrow Lever by carllovett, on Flickr[/IMG]

The guy charged me $25 plus $5 for shipping. That is the price most of the companies charge for those cheap plastic throw levers. I couldn't be more happier with this item. I plan on buying another Primary Arms 1-6x24 scope after Xmas, so I'll definitely be buying another throw lever to go with it.

Corbin Dallas 11-18-2015 5:11 AM

Do you have a link to their sales here or should we just contact carllovett?

That looks great.

Seaweed02 11-18-2015 7:49 PM

Corbin Dallas
 
Hey Corbin Dallas, I sent him a message letting him know that you are interested. I don't have his permission to hand out his info. I guess I should ask him. He doesn't have a thread that I saw. He saw my thread and contacted me.

EMPTYITOUT 11-18-2015 8:32 PM

+1 on that Seaweed...,I saw that custom throw sold here awhile back but could never again find the thread again. Please add me to the list. Looks like nice work

radicalray 11-18-2015 8:44 PM

Google
Cat tail scope throw levers

whipkiller 11-19-2015 2:52 PM

Quote:

Originally Posted by Seaweed02 (Post 17237741)
Hey Corbin Dallas, I sent him a message letting him know that you are interested. I don't have his permission to hand out his info. I guess I should ask him. He doesn't have a thread that I saw. He saw my thread and contacted me.

Wanna' ask him if he can make one for a Vortex Viper 1-4 too?

89LT1 11-19-2015 9:38 PM

I am the member who made this throw lever. At this time I only have them for the PA 1-6 scopes. If anyone would like one or has any questions send me a PM.

O.P. Glad you like the throw lever!

Seaweed02 11-20-2015 4:51 AM

You're kidding
 
Quote:

Originally Posted by radicalray (Post 17238062)
Google
Cat tail scope throw levers

You're kidding me right? There is no way that I would put that junk on my scope. I just ordered another one of 89LT1's scope throw levers just in case everyone else tries to buy him out. I won't be getting the second Primary Arms 1-6x24 scope until after Xmas/New Year, but at least I'll already have the throw lever waiting.

desertrider 12-01-2015 9:50 AM

Quote:

Originally Posted by 89LT1 (Post 17243279)
I am the member who made this throw lever. At this time I only have them for the PA 1-6 scopes. If anyone would like one or has any questions send me a PM.

O.P. Glad you like the throw lever!

Holy smokes! Glad I stumbled on this thread, forgot about the throw lever.

Looks like one helluva quality piece of equipment for the price. I'll get my ducks in a row and contact you.

John I. 12-21-2015 11:32 PM

1 Attachment(s)
Thanks 89LT1!

Ordered one because of this thread, great product, makes adjusting the magnification a breeze. Added a drop of blue locktite and it's solid, feels very durable.

89LT1 12-23-2015 5:38 AM

for anyone waiting i have three levers left from this batch and cant make another until the end of January at the earliest.

fast318 12-24-2015 10:44 PM

I'll take one.

Seaweed02 12-25-2015 10:44 AM

PM
 
Quote:

Originally Posted by fast318 (Post 17405140)
I'll take one.

You need to send him a PM because this is my thread and he doesn't monitor it all the time like I do.

fast318 12-25-2015 11:36 AM

Quote:

Originally Posted by Seaweed02 (Post 17406836)
You need to send him a PM because this is my thread and he doesn't monitor it all the time like I do.

I sent him a PM immediately before I posted here, I wanted to cover both bases. Thanks for thread, can't wait to get the lever!

Seaweed02 05-06-2016 3:10 PM

A few more
 
I could use a few more of these. Any more available?

Seaweed02 05-16-2016 1:58 PM

I need one
 
I need one bad for the new Primary Arms scope I just put on my Windham Weaponry SRC in 7.62x39

Seaweed02 07-07-2016 7:22 PM

Are there more?
 
Are there any more of these ready for shipping yet? I know I can use a few.

mysticookiebear 07-12-2016 1:48 AM

Quote:

Originally Posted by 89LT1 (Post 17243279)
I am the member who made this throw lever. At this time I only have them for the PA 1-6 scopes. If anyone would like one or has any questions send me a PM.

O.P. Glad you like the throw lever!

PM sent, very interested!

Seaweed02 11-12-2016 8:25 PM

Any available?
 
I am still wanting to buy a few of these. Are there any available yet?

lordmorgul 11-24-2016 9:35 AM

As an option to explore if anyone needed before he can make more, the Vortex SV-4 lever fits the Vortex Strike Eagle 1-6 which is supposedly an almost identical scope hardware wth different aperture. May be worth trying.


Sent from my iPhone using Tapatalk

Jason.Benjamin 12-03-2016 12:10 PM

I need one for the PA 1-8 SF....

astocks2622 12-17-2016 2:20 AM

Has anyone gotten a response since 2015? Is he still making them or did we miss out?

Sent from my MotoG3 using Tapatalk

rmi63 12-18-2016 7:40 AM

Switchview which makes a bunch of different models has a 50% off coupon. I believe it is still good and I don't know if they make one for the above mentioned scope. Use code: SV50OFF16

firebert 12-21-2016 9:33 AM

If you don't mind a plastic 3D printed one..
https://mkmachining.com/index.php/product/details/120

89LT1 01-06-2017 11:03 AM

Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.

dbrougher 01-06-2017 1:02 PM

Quote:

Originally Posted by 89LT1 (Post 19454968)
Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.

I would still like one. please keep me on that list. thanks!

Corbin Dallas 01-11-2017 6:31 AM

Quote:

Originally Posted by 89LT1 (Post 19454968)
Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.

You can put me down for one as well.

Zyralius 01-17-2017 5:32 AM

Quote:

Originally Posted by 89LT1 (Post 19454968)
Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.

I'm in how do we sign up to be on the list?

AGFNTB 01-17-2017 5:47 PM

Quote:

Originally Posted by 89LT1 (Post 19454968)
Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.

I'm in for 2 of them.

Aphex 01-18-2017 12:36 PM

Sent a PM a couple weeks back. Hopefully I'm on the list as well.

89LT1 01-23-2017 12:53 PM

Batch #2 almost there
http://i838.photobucket.com/albums/z...IMG_0408_2.jpg

Corbin Dallas 01-23-2017 5:13 PM

Quote:

Originally Posted by 89LT1 (Post 19551555)

Not viewable.

compshootfl 01-24-2017 2:50 AM

Please add me to the list.

Quote:

Originally Posted by 89LT1 (Post 19454968)
Hello All,

I have had a bunch of inquiries if i am still making the levers. I have been extremely bus lately but i plan to have another batch completed by the end of the month.


Jason.Benjamin 01-28-2017 11:37 PM

Me too.....

cortayack 01-29-2017 8:23 AM

tag

89LT1 02-03-2017 8:41 PM

I got the parts all set I think i send a PM to everyone on the list that had messaged me. If i missed you or you are interested send me a message.

http://i838.photobucket.com/albums/z...972B2BDC33.jpg


All times are GMT -8. The time now is 3:30 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.