Calguns.net

Calguns.net (https://www.calguns.net/calgunforum/index.php)
-   Commercial Sales (https://www.calguns.net/calgunforum/forumdisplay.php?f=105)
-   -   Genesis CNC: 80% Lower Receiver - .308 Receiver Sets (https://www.calguns.net/calgunforum/showthread.php?t=784963)

genesiscnc.com 06-27-2013 2:31 PM

Genesis CNC: 80% Lower Receiver - .308 Receiver Sets
 
**Linked Videos from May 2015**:

Genesis CNC - Upper Receiver - Suppressed Customer Build

https://www.youtube.com/watch?v=yzjlyw_9_CA

Genesis CNC: Gen-2 Customer Build - Back Yard Rapid Fire Test

https://www.youtube.com/watch?v=cumr0K9qBcA

Genesis CNC: Customer Build - Bump Fire Stock (**NOT IN CALIFORNIA**)

https://www.youtube.com/watch?v=dhxweC1GGZE




All,

We are excited to announce our Gen-2 products are now available for purchase!

Genesis .308 Upper Receiver:

• Complete stripped upper
o Includes Dust Cover Door, Hinge, and Spring
• Upper uses a KAC/DPMS Barrel Nut and is High Rail Style
• LMT / KAC Owners:
o Option to select the .281 Pin Size.
• Glass media blast preparation for Anodize.
• Black anodizing in accordance with MIL-A-8625, Type III - Class 2
• Aircraft Grade 7075-T6 Billet Aluminum
• Carl Zeiss Contura HTG CMM used for ensuring dimensional accuracy
• ISO 9001: 2008 and AS9100C certified factory
• Checked Fitment with SR-25 and LMT for cross compatibility
• Special attention given to the inside diameter for barrel extension dimension in order to ensure a more accurate rifle.

COST:

10-Pack: $285.00 (Each) Total: @2,850.00
5-PACK: $300.00 (Each) Total: $1,500.00
Single: $325.00

http://genesiscnc.com/product-category/upper-receivers/


Gen-2 80% .308 Lower Receiver:

• Compatible with a DPMS Lower Parts Kit, with the exception the rear takedown pin (Included with Lower).
• Confirmed magazine fitment with Gen2 / 3 Pmags, KAC magazines and DPMS magazines.
• Carl Zeiss Contura HTG CMM used for ensuring dimensional accuracy
• ISO 9001: 2008 and AS9100C certified factory
• Machine tumbled with inert media blast for uniform finish
• Aircraft Grade 7075-T6 Billet Aluminum
• No machining of any kind performed in the area of the trigger / hammer recess
• Completely solid and un-machined in the trigger / hammer area
• Requires specialized machining to complete 100%
• The operations left to be completed:
o Fire control group
o Trigger pin
o Hammer pin
o Trigger slot
o Safety selector hole.

COST:

10-Pack: $170.00 (Each) Total: $1,700.00
5-PACK: $180.00 (Each) Total: $900.00
Single: $200.00

http://genesiscnc.com/product-category/lower-receivers/


Jig:

• Gen-2 80% compatible
• Stainless Steel Bushings
• Side Plates:
o Trigger pin
o Safety Selector
o Magazine Release
o Bolt Stop Spring
• Top Plates:
o Fire Control Pocket
o Trigger Slot

COST:

SINGLE: $160.00

http://genesiscnc.com/product-category/jigs/

Rifle Builders Set:

Cost: $635.00

For those looking to get started building their own .308 rifle we are offering a builder’s set containing one of each of our Gen-2 .308 products. This includes a stripped Gen-2 Upper Receiver, Gen-2 80% Lower Receiver Blank and our custom Jig. You’ll save $50.00 from retail with this package!

http://genesiscnc.com/product/rifle-builders-set/

genesiscnc.com 06-28-2013 3:20 PM

No Title
 
Bump

genesiscnc.com 06-28-2013 4:48 PM

Just wanted to let any people know who've had issues with trying to order or using the contact form to get a hold of us that the site is now working correctly. Thanks for your support!

Edvil91 06-29-2013 12:38 AM

Looks like they are, but just to make sure...Are these lowers Armalite compatible? Also what is the wait time for delivery?

genesiscnc.com 06-29-2013 6:32 AM

Armalite
 
Armalite compatible with a current wait time of 3-4 weeks.

Edvil91 06-29-2013 12:58 PM

Another quick question, I forgot...What kind of magazines does this lower accept?

genesiscnc.com 06-29-2013 2:53 PM

Magazine Compatability
 
SR25

genesiscnc.com 06-30-2013 8:43 AM

BTT
 
BTT

molasses2k 06-30-2013 5:05 PM

Have any dpms compatible? Ready with $$$ now...

genesiscnc.com 07-01-2013 7:28 AM

Armalite
 
Our AR-10s are Armalite models.

Edvil91 07-01-2013 11:30 AM

Just ordered one this weekend!

alsprecision 07-01-2013 4:42 PM

I was able to get in early and took immediate delivery of one AR-15 and one AR-10 Lower Receiver. Everyone who has seen them wants to return the 80's they previously purchased. These are WAY BETTER than are as good or better as I have seen on the market. The EDM magwell is flawless.

Charles4400 07-02-2013 4:50 AM

Sent message through contact page of website...and a morning bump to what looks to be a great product!

Charles4400 07-02-2013 4:45 PM

Armalite based body accepting SR-25 mags.....NICE! I like it!

gidddy169 07-02-2013 7:55 PM

So you need the ar10A upper for the magazines to fit? Or do most modify the magazines to fit the standard ar10 upper?

genesiscnc.com 07-03-2013 12:31 PM

The AR-10 Lower Receiver receives SR-25 Magazines.

ralph@ralphhatland.com 07-03-2013 2:51 PM

If I purchased this ar10 I have several questions. 1) where can I get 20% milled by me as I live in Fresno? 2) SR-25 magazines - where to purchase and how much? What upper do I mate with this? Thanks

genesiscnc.com 07-04-2013 11:19 AM

Question Responses:

1) where can I get 20% milled by me as I live in Fresno?

This is not a service we provide. We suggest tracking down a friendly machine shop local to your area and inquiring about renting machine time. This is a question we have been getting often and we understand it is becoming more and more difficult.

2) SR-25 magazines - where to purchase and how much?

We suggest Magpul among others. See website address: http://store.magpul.com/category/PMAG

3) What upper do I mate with this?

Armalite Models

genesiscnc.com 07-05-2013 10:46 AM

BTT

genesiscnc.com 07-06-2013 8:19 AM

BTT

genesiscnc.com 07-09-2013 12:36 PM

BTT

genesiscnc.com 07-10-2013 5:27 PM

BTT

BillyGoatMachine 07-10-2013 5:29 PM

Ok folks, These guys are finally doing something I've been waiting for the 3 years. An 80% .308 Armalite patterned lower that is capable of accepting the SR25/Pmag patterned magazine. What this means is you can now Make an 80% lower for your LMT MWS, KAC SR25, and LARUE OBR7.62 upper receivers. The finish on these is some of the best in the business and they use 7075 aluminum, not the weaker 6065! Buy with confidence as their customer service is the best I've ever encountered.

genesiscnc.com 07-12-2013 2:03 PM

BTT

coma13 07-12-2013 3:33 PM

Just curious, your specs list an integrated trigger guard but the photo doesn't show that. Which is it?

Brundelfly 07-12-2013 5:42 PM

Looks like an awesome product!!

genesiscnc.com 07-14-2013 9:22 AM

Thanks...we have great reviews from some very knowledgeable customers...we have a large production run going now and we are looking to improve and increase our product base here in the near future...thank you for all of your support.

genesiscnc.com 07-14-2013 9:23 AM

To clarify...our AR-15 has an integrated trigger guard. Our AR-10 does not. This can be seen in the pictures.

rosmar1969 07-14-2013 11:40 PM

I don't think I can let this pass July. Ill Pm you soon!

genesiscnc.com 07-15-2013 3:43 PM

Looking forward to your PM Rosmar

genesiscnc.com 07-16-2013 2:52 PM

BTT

genesiscnc.com 07-17-2013 4:56 PM

BTT

genesiscnc.com 07-20-2013 1:32 PM

BTT

SOAR79 07-20-2013 1:39 PM

tempting

genesiscnc.com 07-22-2013 4:44 PM

Ordered Material for the next production run last week. Will keep all updated.

gemini1 07-23-2013 6:29 PM

Where do you get the jigs to finish the AR10 80%?

radgokart 07-23-2013 11:31 PM

Quote:

Originally Posted by skkeeter (Post 11787466)
Ok folks, These guys are finally doing something I've been waiting for the 3 years. An 80% .308 Armalite patterned lower that is capable of accepting the SR25/Pmag patterned magazine. What this means is you can now Make an 80% lower for your LMT MWS, KAC SR25, and LARUE OBR7.62 upper receivers. The finish on these is some of the best in the business and they use 7075 aluminum, not the weaker 6065! Buy with confidence as their customer service is the best I've ever encountered.

Another vendor posted on their own thread that they go with the dpms pattern because armalite still holds patent protection on theirs. This explains why it hasn't been available. Can Genesis explain if this is true or not?

BillyGoatMachine 07-24-2013 6:25 AM

Quote:

Originally Posted by radgokart (Post 11894344)
Another vendor posted on their own thread that they go with the dpms pattern because armalite still holds patent protection on theirs. This explains why it hasn't been available. Can Genesis explain if this is true or not?

Armalite holds the rights to the name AR10 but not the SR25/Pmag mag well design. In fact their magazines are proprietary to their original AR10 lowers. but they now produce an AR10A lower that used Pmags. They have threatened lawsuits when others using the term AR10 in the name. But not rights to the mag well pattern.

Edvil91 07-24-2013 12:49 PM

Genesis, I'd like you know if you can inform me on the status of my order. Order #140

Thanks!

genesiscnc.com 07-24-2013 9:58 PM

Tried to respond to all outstanding questions on this thread via PM. Please PM us for any remaining outstanding questions.

Thanks,

Genesis CNC


All times are GMT -8. The time now is 10:46 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.