Calguns.net

Calguns.net (https://www.calguns.net/calgunforum/index.php)
-   Semiauto Rifles Gallery (https://www.calguns.net/calgunforum/forumdisplay.php?f=120)
-   -   SKS only Pic thread. (https://www.calguns.net/calgunforum/showthread.php?t=302728)

FiveSeven 05-19-2010 2:52 AM

SKS only Pic thread.
 
Post your or just SKS pictures.


--------------------------------------------------------------------------
Yugoslavian 59/66
Fit & finish is excellent especially for a mass produced military rifle and with the scope mounted it has very good balance to it.
http://img.photobucket.com/albums/08...Image48876.jpg

http://img.photobucket.com/albums/08...ns/Image1t.jpg

http://img.photobucket.com/albums/08.../Image5009.jpg
http://img.photobucket.com/albums/08.../Guns/GT03.jpg

This is the last one that I sold: The aftermarket fixed 10 rounder was later removed (didn't work well).
http://img.photobucket.com/albums/08...s/P3185094.jpg

Centurion_D 05-19-2010 4:33 AM

Very nice SKS..I like the way you dressed it up.

s-s 05-19-2010 8:12 AM

Where did you get the '74 muzzle brake?
RH thread?

radioburning 05-19-2010 8:26 AM

Nice blond furniture. My 59/66 is a little more reddish brown. Here's my beautiful babe(and my girlfriend).
http://i107.photobucket.com/albums/m...1/IMG_4118.jpg

mls343 05-19-2010 10:55 AM

2 Attachment(s)
I'll play.

Here is my first rifle - a Chicom capture from Cambodia - brought home by my Father.

Yes, I still have capture documents and some of the original ammo my Dad brought home.

Interesting, but in 1970 when this was given to me, SKS's were pretty rare.

BTW - Might be better if this was in the Curio and Relic section????

FiveSeven 05-19-2010 2:19 PM

Quote:

Originally Posted by s-s (Post 4312437)
Where did you get the '74 muzzle brake?
RH thread?

Right here
http://www.cncwarrior.com/comersus/s...uct=55&image=2

s-s 05-19-2010 3:05 PM

Quote:

Me:
Where did you get the '74 muzzle brake?
RH thread?

You:
Right here
http://www.cncwarrior.com/comersus/s...uct=55&image=2
Awesome! Thanks!

I was going to chop & LH thread my bubba

Stanze 05-19-2010 3:21 PM

http://img36.imageshack.us/img36/4945/19191350lq.jpg

My M59.

FiveSeven 05-19-2010 3:45 PM

^
Pretty nice SKS you got.

Quote:

Originally Posted by s-s (Post 4314640)
Awesome! Thanks!

I was going to chop & LH thread my bubba

No prob..... Yah, there's way too many RH muzzle breaks out there. Converting to LH is not worth it at all.
I believe there's several RH muzzle breaks on that website, just don't get flash suppressor one. And if you get 74 type break, make sure you get that spacer to align you break properly, you can even spot weld it if you chose to.

Caiden07 05-19-2010 9:19 PM

Quote:

Originally Posted by FiveSeven (Post 4311877)
Post your or just SKS pictures.


--------------------------------------------------------------------------

This is my last remaining Yugoslavian 59/66, and even this one I unsuccessfully attempted to sell not to long ago for a pretty low price IMHO. Good thing I did not and most likely never will.
Fit & finish is excellent especially for a mass produced military rifle and with the scope mounted it has very good balance to it. In 03 I bought 6 of them and after selling them throughout the years I regret doing so but I guess that's with majority of people selling their guns.

http://img.photobucket.com/albums/08...Image48876.jpg

http://img.photobucket.com/albums/08...ns/Image1t.jpg

That is a clean SKS you got there.

http://img.photobucket.com/albums/08.../Image5009.jpg
http://img.photobucket.com/albums/08.../Guns/GT03.jpg

This is the last one that I sold: The aftermarket fixed 10 rounder was later removed (didn't work well).
http://img.photobucket.com/albums/08...s/P3185094.jpg

That is a clean SKS you got there.

Wes 05-20-2010 4:22 PM

nothing special, but i love her! :)

http://img.photobucket.com/albums/v7...adaa9dc2ec.jpg

http://img.photobucket.com/albums/v701/DFwes/sks.jpg

FiveSeven 06-02-2010 3:44 PM

Paratrooper SKS, Thanks to the forum member.

http://img.photobucket.com/albums/08.../Image69iu.jpg

http://img.photobucket.com/albums/08...s/Image50i.jpg

http://img.photobucket.com/albums/08.../Image408l.jpg

http://img.photobucket.com/albums/08...s/IMGP3529.jpg

Full Clip 06-02-2010 4:05 PM

My SKS Bubbas:

1951 Russian with Polish stock
http://img.villagephotos.com/p/2005-...4/DSCN1170.gif

My Yugo DMR
http://img.villagephotos.com/p/2005-...KS-DMR.gif.jpg

Tapco-riffic (with all necessary U.S. parts)
http://img.villagephotos.com/p/2005-.../SKS-Tapco.gif

doughboy334 06-03-2010 11:51 PM

Quote:

Originally Posted by FiveSeven (Post 4311877)
Post your or just SKS pictures.


--------------------------------------------------------------------------

This is my last remaining Yugoslavian 59/66, and even this one I unsuccessfully attempted to sell not to long ago for a pretty low price IMHO. Good thing I did not and most likely never will.
Fit & finish is excellent especially for a mass produced military rifle and with the scope mounted it has very good balance to it. In 03 I bought 6 of them and after selling them throughout the years I regret doing so but I guess that's with majority of people selling their guns.


Did you drill, tap, and inlet your SKS yourself? Nice!

FiveSeven 06-04-2010 5:55 AM

Actually, a gunsmith did it... G&J I think in Roseville.

Stamatos 06-06-2010 8:57 AM

Here's my Multicam'ed Tapco;
http://i402.photobucket.com/albums/p...s/IMG_0086.jpg
http://i402.photobucket.com/albums/p...s/IMG_0075.jpg

FiveSeven 06-06-2010 12:37 PM

That looks awesome..... What kind of bipod is that?
Also, with that rail mount, can you take it apart for proper cleaning?

Stamatos 06-07-2010 10:40 AM

Quote:

Originally Posted by FiveSeven (Post 4407677)
That looks awesome..... What kind of bipod is that?
Also, with that rail mount, can you take it apart for proper cleaning?

The Rail comes off very easily, you can't really clean the gas tube with it on. I don't clean the gas tube after every outing anyway not sure if that is "proper") but when I do, I slap the rail on and off and use a bore lazer for quick zero of the scout scope.
The bipod is a rail mounted Vltor style.
http://riflegear.com/showproduct.asp...d-bipod-modpod
This style is great for having a really low profile when using flush mags (not in the picture) and doesn't interfere with the action but does add more front weight to an already front heavy rifle.
Thanks for looking :D
P.S. Nice paratrooper, if mine had furniture like that, I may not have taken the Tapco plunge!
P.P.S. As a side note, the link is NOT where I got the bipod and not what I paid for it. Needed to make that clear before somebody gives me the business for a $200 bipod on a $150 rifle.

FiveSeven 06-07-2010 3:34 PM

Although the rail is pretty nice, because it needs to be removed is a drawback IMO. Most say that they don't clean the gas piston every time but I disagree.
Every time you shoot there's a lot of fouling inside the tube and on the piston and if you don't clean every time you might end up with carbon buildup in which case it would be nearly impossible to remove.
I can see how this type of rail would work well on AK, since once the bolt is connected to piston and once removed the tube can be clean pretty easy, not so with SKS.
I did mount a red dot on one SKS and after seeing how I could not remove the gas tube I modified the mount so it's permanent and gas tube is removable.

Before.
http://img.photobucket.com/albums/08...s/Image1cf.jpg

After.
http://img.photobucket.com/albums/08.../Image1466.jpg

As to bipod, It looks nice and even if you did spend close to that price, so what if it's on less expensive rifle? I think it looks cheesy when someone puts cheap stuff on expensive rifles.

Ishooter 06-16-2010 8:35 PM

1 Attachment(s)
You guys turned me on, and I have to take out my piece. :D Here's my accurized Yugo SKS. It's bedded and tightened with little to no tolerance of movement between stock, receiver, scope and barrel.

JAY BOOGIE 06-29-2010 5:56 PM

Hello, everyone. I am new here. I need info on posting an ad for a Yugo SKS. I think I bit off more than I can chew, and ready to sell. Thanks...

Crazed_SS 06-29-2010 7:21 PM

http://i233.photobucket.com/albums/e...s/IMG_0453.jpg

RudyN 06-29-2010 7:31 PM

Those are some nice SKSs, so here is mine.

[IMG]http://i165.photobucket.com/albums/u...O/IMG_0893.jpg[/IMG]

slomofo 06-30-2010 12:17 AM

Both were purchased new/unissued. I feel terrible about what I did to the wood stock (I broke the upper handguard when trying to remove it from the gas tube & did a crappy gloss finish on the rest of it) and want to make it look like it used to, but what's done is done. I wiped the bayos down with remoil and they look kind of shiny fromt the camera's flash, but they're actually kind of a flat color; they aren't very sharp either like Mosins and other rifles.

http://i40.photobucket.com/albums/e2...s/DSC02142.jpg
http://i40.photobucket.com/albums/e2...s/4a522700.jpg


Feel free to call me bubba, I don't care. The plastic SKS and a 10/22 are my primary shooters, I take them everywhere and shoot the piss out of em. I don't like the appearance of that donkey dong mag very much, but giant 50+rd mags are the most reliable mags I've ever used. Sadly, this old girl is ready to be retired soon, she's seen about 50,000rds in the past three years and isn't performing as well as she used to. The 10/22 has been rebarreled twice already, but I don't quite know how to rebarrel an SKS otherwise I'd have done it already.

Neither of these weapons are in California.

US made 922(r) parts on plastic rifle:
Hammer
Sear
Mag body/floorplate
Follower
Handguard
Stock
Pistol Grip
Operating rod

Dion 04-22-2011 3:30 PM

BUMP!!!
 
1 Attachment(s)
Got mine done.

Attachment 95139

5.56Geo 04-22-2011 4:39 PM

Here is my SKS. It's a 1954 Izzy from mother Russia with love.
http://i177.photobucket.com/albums/w...geo/sks001.jpg
http://i177.photobucket.com/albums/w...geo/sks002.jpg

Tzvia 04-22-2011 8:48 PM

I've got two, my Yugo on top and a 53 Rusky below.

http://home.earthlink.net/~tzvia1/im...ifles/2sks.jpg

bseo125 04-25-2011 8:19 AM

Very cool shot !!
----------------------------

Lam seo-Dich vu seo-Tu van seo-Cong ty seo

DudeDoug2000 04-30-2011 5:20 AM

1 Attachment(s)
http://www.calguns.net/calgunforum/a...1&d=1304221153

My Yugo, Refinished the wood darker stain

daveinwoodland 04-30-2011 6:08 AM

Russian bought in 95 for 89.00 should have bought 10. The S-12 was along for the ride.

http://i1120.photobucket.com/albums/...DSC_0115_2.jpg

schneiderguy 05-01-2011 3:29 PM

http://i.imgur.com/YKx9h.jpg

My 1954 Izhevsk Russian :chris:

Dion 11-23-2011 12:44 PM

1 Attachment(s)
I apologize to all you purists. Heck, this may even give Bubba a bad name. :chris:

Did a few changes to mine to make it "mine".

Attachment 123893

Japsican 11-23-2011 12:52 PM

Quote:

Originally Posted by FiveSeven (Post 4311877)

Man, that is a beautiful SKS. Makes be want to buy another one!:D

Mossy Man 11-23-2011 4:43 PM

OP

very clean and sexy SKS

love it

FiveSeven 11-24-2011 12:11 PM

Thanks, but do not own any more SKS's. Just AK's, as much as I liked them I prefer just one rifle platform and magazines over clips.

yaybacon 11-26-2011 1:59 AM

was shooting my friends sks, and it led me to search around and i couldn't find anyone on google ever mentioning that you can load loose rounds into an sks faster than any gun by opening the bottom, follower and all and throwing the rounds in, tilting the gun to makesure they're all the way to the back, and slamming it shut
so im just wondering if its well known, or there's a reason not to, or just not many care

EvoXRiley 11-27-2011 12:01 AM

heres mine :)

russian laminate wood

http://i6.photobucket.com/albums/y23...2384298441.jpg

doughboy334 11-27-2011 10:25 AM

Quote:

Originally Posted by yaybacon (Post 7563845)
was shooting my friends sks, and it led me to search around and i couldn't find anyone on google ever mentioning that you can load loose rounds into an sks faster than any gun by opening the bottom, follower and all and throwing the rounds in, tilting the gun to makesure they're all the way to the back, and slamming it shut
so im just wondering if its well known, or there's a reason not to, or just not many care

yea u can do it that way, but sometimes I get jams because the rounds don't stagger correctly so I just end up using stripper clips

Stamatos 11-27-2011 12:43 PM

My updated configuration
http://i402.photobucket.com/albums/p...6092011107.jpg

SKSer45 11-27-2011 12:51 PM

OK kids play nice with your relatives
http://i268.photobucket.com/albums/j...r45/sls004.jpg

http://i268.photobucket.com/albums/j...r45/sls002.jpg


All times are GMT -8. The time now is 5:51 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.