Official 7.62 california legal self loading pics!
I'm bored so here's a pic of my work in progress:D. Fixed mag of course via screw in the TG.
My mini psl build. I'm still waiting on my Fal flash hider. http://img90.imageshack.us/img90/4480/psl4yq.jpg I finished demilling my 3 romy g's kits but now I need make my bolt cutter rivet squeezer. I also have 1 Ptr to go hehe. |
http://i71.photobucket.com/albums/i1...1363_IMG-2.jpg
I just picked this up the other day. Barrel needs a good cleaning and need to replace the furniture. |
My first CA legal build 1971 Russian AKM on a DCI receiver, U.S. parts included: receiver, FCG, pistol grip, brake, floorplate.
http://www.gunco.net/gallery/data/50...an_1971_6_.JPG http://www.gunco.net/gallery/data/50...an_1971_2_.JPG |
Here is the the next build, a Polish kit on a DCI receiver which will become a permentaly fixed single shot. The gas port is sealed shut with high temp. silver solder. U.S. parts include: receiver, FCG, brake, stock, floorplate, follower
here is the insideof the gas block after filling with silver solder, I also had to shorten the gas piston becasue of the solder http://www.gunco.net/gallery/data/50...m/IMG_0525.jpg http://www.gunco.net/gallery/data/50...m/IMG_0823.jpg if you notice the hand guards it started life as a underfolder http://www.gunco.net/gallery/data/50...m/IMG_0822.jpg it is currently a screw build with a broken tap in the rear block until I can get someone to drill or mill it out. Then probably going to rivit it together http://www.gunco.net/gallery/data/50...m/IMG_0810.jpg the wood was soaked in acetone to clean it and finished with a clear poly, the metal was just roughed up with steelwool and degreesed, and sprayed with Alumni- hyde II in a semi-gloss and then #000 steelwool |
wow that russian looks really amazing. Excellent job on that wood restore.
|
Hungarian SA85 built on a Global 1.6mm receiver (special thanks to wayoutwest for helping me with my first build.)
Before paint http://picsorban.com/upload/406000071.jpg After paint http://picsorban.com/upload/40600010.jpg buttstock looks discolored due to the painters tape being left on there for 2 days. Wood looks normal now. |
way out west, where did you get that russian parts kit at :-)
And that polish side folder stock?? :-) |
|
Quote:
|
Quote:
This stock isnt a folder, it is a FSE fixed krink style, I opted not to use the underfolder since I would have to fix it anyways and my receiver wasnt drilled for a underfolder. |
Quote:
|
2 Attachment(s)
|
i see alot of nice looking ak's and would like to know what kind of finishes did you guys use? I was looking at matte black for mine.
|
Quote:
Here's the final piece of my offlist collection:D http://img243.imageshack.us/img243/9539/ptr9os.jpg |
Quote:
|
Quote:
|
What's the deal with you PTR-91 guys anyhow :) ?
|
Quote:
|
Quote:
|
Quote:
But then again what do they know. This of course brings up the question of whether or not we can get our ARs and AKs enchanted to +5 status... |
Quote:
http://img65.imageshack.us/img65/633...img07617kx.jpg |
Quote:
WHERE'S THE MOUNTAIN DEW?!? ...actually, the same former co-worker and my roomie and I were sitting in Fuddruckers earlier today, noting that someone needs to do a version of the Dead Alewives' D&D gamer skit (some folks know it as Summoner Geeks) as gun nuts. ... DM: "Ok, you forgot to set your claymore, and now there are trolls, ok?" Cheeto Fiend: "I've got Troll-slaying incendiary rounds in my M4! They've got a +9 against trolls!" DM: "You're NOT THERE!" |
Quote:
Damn, I dont know whats worse, that I think its a great idea, or that I actually got the joke. Oh, and my rifles with have +5 cloaks of evilness on them once finished |
Here's my SOCOM.
Just got the optics on over the weekend. http://img.photobucket.com/albums/v7...ics/scoped.jpg |
I got my kit yesterday from dph and overall its a good kit but there are some small things that are bugging me. The TG is bent slightly and there are some dings. The tripple tree looks like a kid chiseled it off. Should I try to get and exchange or should I just fix it. The TG doesn't look too bad and I was thinking of getting the tripple tree without the grenade launcher.
http://img342.imageshack.us/img342/3015/tg5go.jpg http://img289.imageshack.us/img289/1209/t325uh.jpg |
|
Quote:
|
Yah its a cetme. When I mod the trigger pack to semi do I still need to flick the selector up to fire (T)(S)(F)?
|
on my trigger group, it's up for safe and down for fire. But then, I have a semiauto trigger group.
|
Quote:
|
I have another question about my cetme kit. On the bolt carrier the tube that holds the recoil spring has a groove in it and its all the way to where the the cocking handle mates, is that normal. I'll post pics later. Also do I need to modify my jld receiver to fit my cetme butt stock.
http://img102.imageshack.us/img102/5007/groove5vd.jpg http://img238.imageshack.us/img238/7780/groove22og.jpg |
prior to being transfered to me
http://i40.photobucket.com/albums/e2...o/IMG_0996.jpg http://i40.photobucket.com/albums/e2...o/IMG_0998.jpg with her other friends http://i40.photobucket.com/albums/e2...o/DSCN4830.jpg |
Well, here is my HAR-25 with traditional A-2 stock.
http://www.sailmontereybay.com/Photos/A-2_AR-10.JPG |
And there is the ACE stock version:
http://www.sailmontereybay.com/Photos/ACE_AR-10.JPG |
Might as well throw in my DSA 58 PARA FAL:
http://www.sailmontereybay.com/Photos/PARAFAL.jpg |
I finally got some free time to work on my romys. It's true about what they say about building an ak, it takes a lot of filing and more filing. I feel like I'm in an assembly line haha. I still have one to go.
http://img156.imageshack.us/img156/3963/group9kb.jpg My newly made hf rivet crusher. If you want specs let me know. http://img156.imageshack.us/img156/6052/rivet0tt.jpg http://img156.imageshack.us/img156/4421/squish8zm.jpg Long rivet crusher WIP http://img156.imageshack.us/img156/3029/longr1yk.jpg |
More progress pics. Barrels installed using the allthread method. Who needs expensive tools.
http://img128.imageshack.us/img128/7...lthread4da.jpg http://img462.imageshack.us/img462/5...thread27xw.jpg http://img469.imageshack.us/img469/3416/pin2na.jpg http://img469.imageshack.us/img469/9248/group3mx.jpg |
ITM MK-99 build
So, heres a few pics of the mk-99 build with a Romy G kit.
http://i42.photobucket.com/albums/e3...1/P1010056.jpg http://i42.photobucket.com/albums/e3...1/noserial.jpg http://i42.photobucket.com/albums/e3...1/P1040070.jpg http://i42.photobucket.com/albums/e346/BLFD1/P1043.jpg It's an ITM reciever which took quite a bit of "massaging" to get everything to fit. I read somewhere that theres alot of filing when you build one of these...they're right. I went with a kit that had been demilled, drilled and tapped already as I didnt really have the time to gather all the rivet stuff. The kit came in pretty good shape and the company provides everything needed to complete it minus the receiver, magazine and a few odds and ends. I went with a PG so I fixed the mag with a rather ugly screw that I had in my tool box. Fitting and marking the receiver went pretty well. It took about two hours to make the templates, center punch the holes and drill out the receiver (I was using a hand drill) there was a little "widening" of two of the holes but all in all it went well. There was a bit of filing to the front of the receiver that had to be done to get the front trunion to fit right but was pretty straight forward. The rear trunion fit good but I had to file on the stock a little to get the trunion to fit straight. Once all that was done it was time to build up the FCG, that was easy, and had no issues there but, I did run into the normal bolt wont return problem. So as you can see I had to do a little grinding and polishing of the hammer to get it not to bind on the bottom of the bolt. After allowing myself a couple millimeters play in the hammer I ran into another problem...the disconnector wasn't catching so, back to the filing..... I had to take a little off of the disconnector to get it to catch the hammer when the bolt came back, a few times test fitting and I was good to go. I have ran the snap caps through it a few dozen times or so and it all appears to work smooth. I'm off to the range on Thursday so I'll add a range report when I'm done. I do recommend this receiver to people that have some time and the patience to work out the kinks of a build, and the basic tools (files, etc.) and a place to work comfortably and with ample light. As for the kit, I was very happy with how it went together. If anyone is interested in the dealer I got it from drop me a PM |
this is for Unkownassailant...another pic of my workbench:p ...
My ADR "Area Defense Rifle" to go along with my PDR in the .223 thread http://i61.photobucket.com/albums/h5...ICT0945-sm.jpg http://i61.photobucket.com/albums/h5...ICT0944-sm.jpg I took the easy route. Century Arms AES-10 and removed the pistol grip...POOF! it's SB23 compliant. And before anybody starts harping on the magazine, I bought it back in '93. Two 100rd Chinese drums along with my MAK90. I don't have the MAK90 anymore, though.:( |
Quote:
|
All times are GMT -8. The time now is 7:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.