Calguns.net

Calguns.net (https://www.calguns.net/calgunforum/index.php)
-   Commercial Sales (https://www.calguns.net/calgunforum/forumdisplay.php?f=105)
-   -   Wrap your hand around a Hammerhead CA-Legal AR-15 Grip. (https://www.calguns.net/calgunforum/showthread.php?t=314531)

Exile Machine 06-22-2010 1:54 PM

Wrap your hand around a Hammerhead CA-Legal AR-15 Grip.
 
FFL Retailers - We are expanding our dealer network for this product. Email ceo@exilemachine.com for quantity discounts.

EXILE MACHINE "HAMMERHEAD" CA-LEGAL AR-15 STOCK ADAPTER
for DETACHABLE Magazine "Featureless" AR-15 Rifles


Replaces pistol grip on Off-List featureless AR-15 rifle. Avoid CA's "Assault Weapon" registration.

1.) Replace Pistol Grip with Exile Machine Hammerhead AR-15 Stock Adapter.
2.) Remove Forward Grip, Stock, Grenade/Flare Launcher, Flash Suppressor.
3.) Attach fixed (or pinned collapsible) stock. There are many ways to configure.
4.) Shoulder up like a Wooden Rifle - Secure Comfortable Wrap-Around Hold

100% CA-LEGAL*


NO BULLET BUTTON OR MAG LOCK!
https://www.exilemachine.net/shop/im...1/IMG_3908.JPG
(Collapsible stock must be pinned for CA-compliance)

NO TOOL TO DROP MAGS!
https://exilemachine.net/images/IMG_7131_S.JPG

NO ASSAULT WEAPON REGISTRATION?
http://www.exilemachine.net/shop/ima.../IMG_7465C.JPG
Shown with Magpul MOE Fixed stock

THAT'S RIGHT: NO ASSAULT WEAPON REGISTRATION!
https://www.exilemachine.net/shop/im...123-TYPE-2.JPG
Featureless rifles are under no requirement to be registered as AW under the new CA assault weapons bans. Registration leads to Confiscation.

NO-HASSLE, NO-QUESTIONS 90-DAY SATISFACTION GUARANTEE & 5 YEAR WARRANTY!

CLICK HERE TO BUY NOW
http://www.exilemachine.net/images/HH-Black.jpg

*See CA PC 30515(a)(1)(A-F) & CA 11 CCR 5469(d)
, also the California Department of Justice Bureau of Firearms attests** that Hammerhead is not a pistol grip and therefore legal when used on a detachable magazine semiautomatic centerfire rifle with none of the features listed in CA PC 30515(a)(1)(A-F). As with any firearms accessory product, you should read and understand the CA Penal Law before use.

**Sworn testimony of Frank Navarro, CA DOJ Bureau of Firearms Special Agent, in the case of People vs. Haack and Haack, California County of Tulare Superior Court, 3 November 2010.

islandviewent 06-22-2010 4:58 PM

NO 10 ROUND LIMIT!
Are you sure???

Exile Machine 06-22-2010 5:21 PM

Quote:

Originally Posted by islandviewent (Post 4498346)
NO 10 ROUND LIMIT!
Are you sure???

Yep. If you legally own (or legally borrow) large capacity mags, you can use them in a detachable magazine (aka "featureless") rifle. See CA PC 12276.1(a)(1)(A-F), and PC12020(a)(2).

Where you cannot use large capacity mags is in a rifle with a magazine lock. See CA PC 12276.1(a)(2).

-Mark
Exile Machine LLC

Exile Machine 06-23-2010 5:40 PM

See the latest review on Weaponeer.net: http://www.weaponeer.net/forum/forum...TID=12902&PN=1

http://www.exilemachine.com/IMG_7465.JPG

http://www.exilemachine.com/IMG_7138_CR.JPG

DJ Skillz 06-23-2010 9:48 PM

I just got my hammerhead grip in the mail today from the father's day sale. I'm stoked to try it out. Now I just need to pick up a pistol buffer tube and a fixed stock.

Joe 06-23-2010 9:58 PM

Quote:

Originally Posted by garrett916 (Post 4505869)
you cant have more than ten rounds in any gun in cali nomatter what

incorrect

Quote:

Originally Posted by Lucky7 (Post 4505894)
FUD You can legally use high capacity magazines in California if you possessed them prior to the ban in 2000. Or if you are a LEO. You can't use magazines with a capacity larger than ten rounds in a maglocked gun.

correct

Joe 06-23-2010 9:59 PM

I couldn't decide between WIN-WIN! and Excellent!

I finally went with excellent.

wsmc27 06-25-2010 8:35 AM

Quote:

Originally Posted by DJ Skillz (Post 4505942)
I just got my hammerhead grip in the mail today from the father's day sale. I'm stoked to try it out. Now I just need to pick up a pistol buffer tube and a fixed stock.

Where are good sources/prices for the pistol buffer tube?

Thanks, and have fun! :)

Exile Machine 06-25-2010 8:40 AM

Quote:

Originally Posted by wsmc27 (Post 4513202)
Where are good sources/prices for the pistol buffer tube?

We are getting a shipment of Rock River Arms and Model 1 Sales tubes in. These will be complete with CAR buffer and buffer spring. Look for those to show up on our secure online store in a few days. Here's a direct link to the pistol tube category on our store:
https://www.exilemachine.net/shop/pi...ubes-covers-2/

Uriah02 06-25-2010 8:41 AM

I checked the PC and it was just the portion of the listed lowers. I still don't get how this has any more legality for pre-ban hi-caps than a mag-locked rifle.

Exile Machine 06-25-2010 8:43 AM

Quote:

Originally Posted by Uriah02 (Post 4513237)
I still don't get how this has any more legality for pre-ban hi-caps than a mag-locked rifle.

Clarified in detail here: http://www.calguns.net/calgunforum/s...d.php?t=315096

Uriah02 06-25-2010 8:53 AM

No all I need are pre-ban mags:kest:

shadowofnight 06-26-2010 12:09 AM

I just had to give the hammerhead a shot , so I picked one up from the exile machine website.

I tried every combination of stock and buffer tube shown on the site , and the one I settled on was the Type 1 configuration...my only issue was I needed a little bit longer buffer tube for my cheek weld to be comfortable.

So I used a full length buffer tube instead of the pistol buffer tube, worked out perfect for me. I took a button head allen bolt, drilled it to the same hole diameter as the vented screw included with most stocks...just thought it looked nicer then the slotted vented screws.

Then I used one of the really short LE Tactical A2 type stocks...it was the perfect length for me ( With the added length of the hammerhead ) and the stock still extends past the full length buffer tube I used...that was important so when I set the rifle down on the buttplate the button head vented screw never touches the ground.

I replaced the flash hider with a DPMS Miculek muzzle brake...to make sure the entire rifle was completely featureless.

Then proceeded to yank off the bullet button, and dig out the old school metal 30 rounders that I couldnt use on the bullet button builds ( I did rebuild them with magpul followers and ranger plates ).

shadowofnight 06-26-2010 12:10 AM

One more......

NorCalDustin 06-26-2010 1:23 AM

I need to fondle one of these...

rifle man 06-26-2010 2:06 AM

Question....how do you prove that you owned the highcap mags before the ban. Are they marked in some way?

NorCalDustin 06-26-2010 2:15 AM

It's my understanding that they have to prove that you DID NOT OWN the mags before the ban...

If they aren't necessarily marked with a date, then maybe they are marked with a manufacture's name... And if lets say that manufacture didnt start making mag's until after the ban that could be a problem. Of course marking's are normally on the floor plate and maybe you replaced the floor plate at some point..

Anyway! The point being, I think as long as you're on the level and everything's on the up and up and you legally owned the mag's preban you should be fine.

shadowofnight 06-26-2010 9:04 AM

It doesnt even matter how the mags are marked , when you buy the rebuild kit what comes in the bag is the mag body...spring...follower...and floorplate.

If your magazine body is rusted/dented/worn out ...you replace it as well.

The entire reason I bought my Socom II was that I had ammo cans full of 20 rounders that my uncle had given me before he died back in my early 20's ( Lets just say that was a long time ago :) ) They were in awesome shape and usable , I kept them thinking that when I could afford the rifle I really wanted ...they would be available.

It was a completely different story with the AR mags , they werent stored in oring sealed containers and were basically trash and in a box of scrap metal in the garage . It wasnt until becoming a forum member here, and doing a lot of research that I realized I could " Rebuild " those junk magazines with a new mag body as well...all those years I just figured why put new parts into banged up disgusting looking mag bodies that probably wont feed to save their lives.

If I would have known I could have rebuilt those mags including the mag body itself , I would have built my first AR as a featureless and not waited until just now.

This forum is awesome in that respect, I havent even shot my featureless yet...but that will change this coming Monday :D

pennys dad 06-27-2010 8:37 AM

Hmm, this seems interesting. I am thinking about trying one.

Exile Machine 06-28-2010 8:06 AM

I'm digging this configuration... Might have to stock some bare receiver extension tubes and foam sleeves:
http://www.calguns.net/calgunforum/a...3&d=1277539813

We have all the goodies you need to complete your featureless build. Stocks, pistol tubes, brakes, optics, LPKs. https://www.exilemachine.net/shop

robertjq 06-28-2010 7:04 PM

Just placed my order! Thanks for the deal!!
I love holiday sales!!

Exile Machine 06-29-2010 1:52 PM

Tuesday Afternoon Bump...

Sale still going like gangbusters. If you're shy of the internet you can always phone in an order. I answer the phone myself: 214 432 7411.

-Mark

fastkevin 06-30-2010 3:29 AM

Quote:

Originally Posted by JaMail (Post 4531986)
your on calguns, and you posted something like that? really? seriously?

Lighten up dude. I'm on Calguns and thought the same thing. I could see your 'tude if someone was spewing something like you can legally use high-caps without a pistol grip period(seems I've seen that somewhere..?), but his error(as well as mine) was on the safe side.
I'm just happy I was in a foreign country(AZ) for a while, and got to use my weapon how it was intended.:D

wsmc27 06-30-2010 1:34 PM

Quote:

Originally Posted by Exile Machine (Post 4528111)
We also have all the goodies you need to complete your featureless build. Stocks, pistol tubes, brakes, optics, LPKs.

Nice!

Placed an order this am, gonna give that Hammerhead a try. Thanks for the great price!

Happy 4th! :)

Exile Machine 07-01-2010 7:06 AM

Thanks for the orders.

Word's getting out that you don't have to lock up your mags. And you can still add some pretty awesome "features" like holographic sights. Check out the store and pick up an ACE stock or a pistol tube or muzzle brake. Or holographic sight. Ambi-safety, LPK, we're stocking a bunch of other stuff now that works well with the Hammerhead.

-Mark

goodlookin1 07-01-2010 7:58 AM

Exile Machine - It seems the pictures you have of your weapons have Flash Hiders on them.....wouldnt that make them "featured" rifles? And what's the ruling on muzzle brakes on featureless builds?

Thanks.

Exile Machine 07-01-2010 8:01 AM

Show me which photos you're referring to. Flash hider's a feature and shouldn't be on a CA-featureless rifle. Muzzle brake's OK.

Some of our customers are not in CA, and may prefer to use a flash hider. (Yes we have customers in the free states who prefer a wooden rifle hold).

-Mark

goodlookin1 07-01-2010 8:18 AM

http://exilemachine.com/images/IMG_8497_C.JPG

http://exilemachine.com/images/IMG_8499_C.JPG

The first pic looks like a YHM phantom flash hider and the second pic looks like the standard A2 birdcage flash hider. Maybe I am wrong??? :confused:

Exile Machine 07-01-2010 8:33 AM

Those are both the same YHM muzzle brake. Not a flash hider. In the second photo the tip of the device is cropped out of the picture.

Here's a photo of the device, taken from YHM's website:

http://img704.imageshack.us/img704/6138/yhm285m1.jpg

WhatsTCP 07-01-2010 8:46 AM

Quote:

Originally Posted by goodlookin1 (Post 4546811)
http://exilemachine.com/images/IMG_8497_C.JPG

http://exilemachine.com/images/IMG_8499_C.JPG

The first pic looks like a YHM phantom flash hider and the second pic looks like the standard A2 birdcage flash hider. Maybe I am wrong??? :confused:

I am really digging that bottom configuration...it doesn't look weird and quirky like the monsterman grip (no offense, just IMO)

And the bottom rifle has the same muzzle brake as the top one, it just looks like a A2 cage since its slightly cut out of the picture, look closer

goodlookin1 07-01-2010 11:24 AM

Quote:

Originally Posted by Exile Machine (Post 4546872)
Those are both the same YHM muzzle brake. Not a flash hider. In the second photo the tip of the device is cropped out of the picture.

Here's a photo of the device, taken from YHM's website:

http://img704.imageshack.us/img704/6138/yhm285m1.jpg

My mistake....that is certainly a muzzle brake. Just couldnt see it from the picture :rolleyes:

Now if only I had some legally owned hi-cap mags!

wsmc27 07-01-2010 11:29 AM

Quote:

Originally Posted by WhatsTCP (Post 4546942)
I am really digging that bottom configuration...it doesn't look weird and quirky like the monsterman grip (no offense, just IMO)

I am gonna try that set-up, tho' in my old eyes they all look weird if they aren't like an original A1 ;)

Exile Machine 07-02-2010 2:17 PM

Orders have shipped.

We have a bunch of accessories now on the store that help round out your detachable magazine AR-15 build. ACE & RRA stocks, pistol buffer tubes, parts kits, muzzle brakes, Magpul PMAG rebuild kits, and EOTech holographic sights. High-tech sights are not a listed feature in 12276.1 so why not? More models coming soon.

https://www.exilemachine.net/images/IMG_8955.JPG

We added the RRA CAR Operator stock today as well:

https://www.exilemachine.com/images/IMG_8964.JPG

We will ship another batch of orders late tonight. Any orders received by 5PM Pacific time will be carted to the post office by dark of night. Post office says they're closed tomorrow so this is the last shipping opportunity till Monday.

-Mark

Apex 07-03-2010 9:44 AM

Thanks!

TTT for a great deal for Calgunners!

vta 07-03-2010 10:14 AM

Quote:

Originally Posted by Uriah02 (Post 4513308)
No all I need are pre-ban mags:kest:

if you don't already own them it's too late.

Exile Machine 07-03-2010 2:23 PM

(Don't forget if you don't own 30 rounders you can still borrow from a friend at the range as long as he stays nearby, or just drop 10 rounders with your finger.)

Thanks for the orders.

Check/MO accepted as well. Two more days. Three Hammerheads fit nicely into a priority mail flat rate box so that's the best value for your federal reserve notes. Figure you'll build more than one rifle and the sale will be over on the 6th. So at these prices might as well order three.

Big batch of pistol tubes and ACE stocks coming in this week.

wsmc27 07-03-2010 4:04 PM

Thanks for the prompt service...got my order today.

Happy 4th!
:)

igorts 07-03-2010 8:47 PM

order placed for one.
any special on pistol buffer tubes?:D

Exile Machine 07-04-2010 3:43 PM

Thanks for the orders! One more day and then the sale will be over, so get 'em now while you can. Best deal on shipping is to order three units.

Exile Machine 07-05-2010 3:46 PM

Bump. Sale ends tonight! 23:59 Pacific Time. Don't miss it. Stock up. Three units is your best deal with shipping. Pick up a stock and buffer tube to match.


All times are GMT -8. The time now is 6:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.