PDA

View Full Version : What more do I need?


vega
04-28-2008, 11:19 PM
Hi guys, I have the pictured parts below plus A2 stock and PG. What else do I need to complete my lower?

http://www.bushmaster.com/images/catalog/Parts_Accessories/Competition_Parts/8448592-SCGK.gif

Would this make it complete?
http://www.bushmaster.com/images/catalog/Parts_Accessories/Lower_Receivers/ARPARTSKIT.gif

http://www.bushmaster.com/products.asp?cat=501

ETA - Per bushmaster:
We've taken our Field Repair Kit, our Complete Spring Package, and our Complete Pin & Detent Package and combined them into one "super-kit" that will take care of all your AR15 rifle's spare parts needs. You'll get all these parts and more: every Spring in the Gun (including Buffer Spring); Firing Pin; 3 Firing Pin Retaining Pins; Cam Pin; Disconnector; Extractor; Extractor Pivot Pin; 2 Extractor Spring Inserts; Gas Ring Set; 2 Hammer & Trigger Pins; 2 Front Sight Taper Pins; 2 Takedown Pin Detents; Safety Detent; Bolt Catch Plunger; Gas Tube Roll Pin; Front Sight Detent; Ejector Pin; Forward Assist Pin; Bolt Catch Pin; Buffer Detent; Trigger Guard Pin.

PolishMike
04-28-2008, 11:21 PM
That would do it and you would have several parts left over.

ghost
04-28-2008, 11:25 PM
bullet-button or prince50;)

vega
04-28-2008, 11:34 PM
I got the BB covered. I think it's missing the bolt catch.

elSquid
04-28-2008, 11:34 PM
Hi guys, I have the pictured parts below plus A2 stock and PG. What else do I need to complete my lower?

Would this make it complete?
http://www.bushmaster.com/images/catalog/Parts_Accessories/Lower_Receivers/ARPARTSKIT.gif



Missing: mag catch, bolt release, trigger guard (http://www.ar15.com/content/guides/assembly/lower/), probably some other stuff.

Probably easiest to just buy a LPK to go along with your match trigger.

Stock: you'll need a buffer, spring, extension, etc (http://www.tenpercentfirearms.com/index.php?main_page=product_info&cPath=3&products_id=82)....

-- Michael

vega
04-28-2008, 11:36 PM
Missing: mag catch, bolt release, trigger guard, probably some other stuff.

Probably easiest to just buy a LPK to go along with your match trigger.

Stock: you'll need a buffer, spring, extension, etc (http://www.tenpercentfirearms.com/index.php?main_page=product_info&cPath=3&products_id=82)....

-- Michael

Dang it! Is that a match trigger?!

elSquid
04-28-2008, 11:40 PM
Dang it! Is that a match trigger?!

The picture you used was for the "Bushmaster Competition Trigger" at the link you provided. I assumed that you had purchased that.

-- Michael

vega
04-28-2008, 11:55 PM
http://www.bushmaster.com/images/catalog/Parts_Accessories/Lower_Receivers/A-REHAB.gif
Looks the same to me. What's the difference? I bought mine used with the springs like the first pic.

elSquid
04-29-2008, 12:25 AM
http://www.bushmaster.com/images/catalog/Parts_Accessories/Lower_Receivers/A-REHAB.gif
Looks the same to me. What's the difference? I bought mine used with the springs like the first pic.

Fair enough. Look at this link (http://www.ar15.com/content/guides/assembly/lower/), and you'll have the complete list of everything needed to build a lower.

-- Michael

J_Rock
04-29-2008, 12:27 AM
you need a lower....

mike452
04-29-2008, 8:43 AM
You have a Bushmaster match trigger and a Spare Parts Kit.

You need a Lower Parts Kit.


From what I can see you are missing bolt catch, mag catch, takedown pin, pivot pin, pistol grip, pistol grip screw and washer, takedown or pivot spring, buffer retainer spring, and buffer retainer.

vega
04-29-2008, 2:31 PM
Thanks for all the replies, I ordered LPK and I'll just put aside whatever I don't need from that kit.