PDA

View Full Version : In-Store and Shipping Now: SIG P6/P225 Rearsenal Kits @ $19.50


duenor
04-25-2008, 4:21 PM
ETA 05.30.2008: 48 REARSENAL KITS REMAINING UNSPOKEN FOR.
The group buy is now officially OPEN for orders. Available in-store June 4th
http://i27.tinypic.com/28l5las.gif

For those of you who purchased any of the recent import of S.I.G. P6 Sidearms, you may have noticed that sometimes the slide fails to chamber a round from the magazine properly. This is due to weak recoil and magazine springs. While the West German Polizei did not fire their sidearms much at all (as evinced by the lack of real barrel wear), they did cycle their slides and load/unload their magazine frequently - quite possibly several times a day, every day. The weak magazine spring fails to push the round up "tightly", and the weak recoil spring does not have enough energy to strip the round from the magazine cleanly.
ETA 05.30.2008: 48 REARSENAL KITS REMAINING UNSPOKEN FOR.
The group buy is now officially OPEN for orders. Available in-store June 4th






Each SIG P6/P225 Rearsenal Kit is $19.50 and includes
1x EXP Standard 16LB Recoil Spring
1x EXP Firing Pin Spring
2x EXP 5% 8rd Magazine Springs
All springs are manufactured to specifications exceeding SIG factory requirements and are guaranteed against defects. EXP Recoil springs are expected to last up to 5000 rounds before requiring replacement and will last indefinitely if stored in their original packaging.Each additional SIG P6/P225 EXP 5% 8rnd Magazine spring will be $5.50.
This will be your cost if picked up at the store (In Baldwin Park, CA, right by Burro Canyon - come with your gun and get some shooting in on the same day). If you would like it shipped to you, simply call in with your CC# and Matt or Lily will take care of you. Shipping will be a few dollars and will be for any number of kits.

PS: Also, don't forget that we have a refinishing side special going on right now for SIG pistols:
--Ceramic Refinishing
Slide Assemblies Only: SAO $65
Complete Sidearm; Includes one magazine refinish: $165
Single Magazine Refinish: $15
--Cured Duracoat Refinishing
$55 w/o shipping for slide only, if the customer disassembles on his own
$155 w/o shipping for complete handgun, again if the customer disassembles on his own


ENTREPRISE ARMS - www.entreprise.com (http://www.entreprise.com/)
5321 Irwindale Ave
Irwindale, CA 91706-2025
Phone Numbers : (626)-962-8712
Fax Numbers : (626)-962-4692

Hours of Operation:
Monday - Fridays
8 am - 5 pm PST
1st and 3rd Saturdays
9am - noon
Closed Sundays

Springs will be new 2008 manufacture, made from using the finest quality spring wire and will provide long life without fatigue, in most cases well past that of standard springs. The magazine springs will also be 5-10% sronger than orginal factory springs as well, and be of great utility especially when combined with hollow point ammunition. All units guaranteed to be free from defects and workmanship from the manufacturer. $19.50 per Re-Arsenal Kit
Shipping is most likely $3 or so flat for everything no matter how much you buy - I'll know more later. It might be a teeny bit higher because you gotta pay a guy to pack and label like 50 packages which takes some time. And of course if you pick up there is no shipping.
---THIS INTEREST LIST WAS CLOSED 4/26 AND IS NO LONGER RELEVANT. THE CGN IS OPEN AS OF TODAY 05.10 AND WILL CLOSE ON -UPDATED SEE ABOVE NOTES 05.18.08--. THANK YOU.
Re-Arsenal Kits wanted (if additonal will add on same line)
berg: 1
saltdog55: 1 kit, and 2 mag springs
ronco: 1
ghostrider4er: 1
triad: 1
blister: 1
mooster: 1
protecsylt: 1
v88dx: 1
flyingpen: maybe 1
ronco: yes I can get you a reduced hammer spring
toolman9000: 1 kit, plus 2 extra mag springs
bhpfan: 1
onikuma: this dude lives VERY close to me... he wants a buncha stuff and i'll settle up with him in person.
japedo: 1
marxdspot: 1
tonelar: 1
avidone: 1
jon: 1
siikfrk: 1
crazyhorse305: 2
jhova98040: maybe 1 kit; extra mags not available at this time, only springs. you shouldn't pay more than $35/a mag.
jchen76@gmail.com (jchen76@gmail.com): 1
kjh: 2
krim: 1, and 2 extra mag springs
lcorn: 1
socalgunrunner: 1
niteqwill: 1
blackberg: 1
scoobysnax: 1
gunn: 1
maxicon: 2
jsauce: 1 and 2 mag springs
pilotimb: 1
-INTEREST LIST NO LONGER RELEVANT - CGN OPEN 05.10 - CALL IN OR DROP OFF YOUR ORDER

FlyingPen
04-25-2008, 4:39 PM
Is $19.95 the shipped price?

shooter4ever
04-25-2008, 5:01 PM
Can you also get a reduced power hammer spring?

Ronco
04-25-2008, 5:05 PM
Count me in for one. PM me for payment instructions.

Thanks.

toolman9000
04-25-2008, 5:06 PM
I will take one kit, and 6 extra magazine springs.

onikuma
04-25-2008, 7:28 PM
i'll give you my order and funds in a bit :P

duenor
04-25-2008, 7:54 PM
Extra magazine springs are $5.50 a piece. I'd rather people not buy any mag springs unless you get at least one Re-Arsenal Pack because we can't get this pricing without getting at least 100 recoil springs, and I'm trying to get that much through several boards. In the worse case scenario, though, the price for the pack will go up like a buck or two, the mag springs will go up like 50 cents at most. That is if we can't manage to get 100 units.

Shipping is most likely $3 or so flat for everything no matter how much you buy - I'll know more later. It might be a teeny bit higher because you gotta pay a guy to pack and label like 50 packages which takes some time.

And of course if you pick up there is no shipping.

BHPFan
04-25-2008, 7:58 PM
Count me for 1 pack as well.

Thank you.

duenor
04-25-2008, 8:01 PM
Current Count From both Threads
(this is not a "if you don't buy it I will curse your name" kind of list... it is an expressed interest kind of list... I don't want to be stuck with a huge batch of springs unless people want em... so we got to get at least 50 interest)

Re-Arsenal Kits wanted (if additonal will add on same line)
berg: 1
salt: 1
ronco: 1
ghostrider4er: 1
triad: 1
blister: 1
mooster: 1
protecsylt: 1
v88dx: 1
flyingpen: maybe 1
ronco: yes I can get you a reduced hammer spring
toolman9000: 1 kit, plus 6 extra mag springs
bhpfan: 1
onikuma: this dude lives VERY close to me... he wants a buncha stuff and i'll settle up with him in person.

Japedo
04-25-2008, 9:11 PM
I hit the other thread, might as well hit this one too. Count me in.

toolman9000
04-25-2008, 9:41 PM
please edit my interest:

@ $5.50 per spring just add two extra in addition to the ones in the kit... so there are four total.

springs are 'spensive!

marxdspot
04-25-2008, 10:41 PM
Alright buddy, count me in for a kit. Please PM or let us know how to pay, etc. Thanks again, Kev!

tonelar
04-25-2008, 11:36 PM
I have a question;

Where (not when) are these kits first arriving?

duenor
04-25-2008, 11:55 PM
once i get 50 units "spoken for" (in quotation marks because nothing is spoken for until cash or check or credit is in hand), then I'll place he order.
Figure a week or two after that.

avidone
04-25-2008, 11:56 PM
I'll take one kit.

Jon
04-26-2008, 7:11 AM
I'd be interested in 1.

siikfrk
04-26-2008, 7:43 AM
I'll take one!

crazyhorse305
04-26-2008, 9:23 AM
put me down for 2 kit, pm me for payment info.

jhova98040
04-26-2008, 10:11 AM
i would also like extra mags if possible.

pm details please.

Saltdog55
04-26-2008, 6:36 PM
Please edit my kit with 2 extra mag springs.

Thank you

jchen76@gmail.com
04-26-2008, 7:32 PM
Put me down for kit too.

KJH
04-26-2008, 7:41 PM
I'm in for two kits.

krim
04-26-2008, 7:49 PM
i'll take a kit, i dont really need the recoil, but i'd like 2 extra mag springs.
i can pay/pick up on the way home from work.

duenor
04-26-2008, 8:47 PM
List updated.

psssniper
04-26-2008, 9:44 PM
In for two kits, thanks Kev

Paul

lcorn
04-27-2008, 6:52 AM
I'd be interested in one

duenor
04-27-2008, 9:04 AM
List updated

NiteQwill
04-27-2008, 10:46 PM
I'm also in for one! Picking the P6 up on Saturday! :)

blackberg
04-27-2008, 11:30 PM
count me in for one, hopefully I can Start my dros Th :(

-bb

scoobysnax
04-28-2008, 9:40 AM
I might be interested in one kit.

gunn
04-28-2008, 10:34 AM
I'm in for 1 kit.
-g

maxicon
04-28-2008, 12:54 PM
Put me down for 2 kits.

Thanks!

JSAUCE
04-28-2008, 4:27 PM
I will take 1 kit and 2 extra mag springs.

pilotimb
04-28-2008, 9:05 PM
I'm in for 1 kit.

dvsdev
04-29-2008, 11:34 AM
I should have posted sooner. I have an interest in 2 sets.

agmkthebear
04-29-2008, 3:04 PM
kev. i am interested in picking up two of the kits as soon as they come in,
please contact me at agmkthebear@yahoo.com

i live in west covina and will come by asap

Alex M.

ghostwong
04-30-2008, 8:08 PM
I'll take one kit. I can pay for it when I pick up the gun.

6266guy
04-30-2008, 9:24 PM
1 Re-Arsenal Pack

diametrik 7
05-01-2008, 9:06 PM
Cool.. Put me in for 2 Re-Arsenal Kits..

ontmark
05-03-2008, 10:56 PM
1 Kit please
PM me when thet are in.
I will call you then with billing info and ship to info

best45auto
05-04-2008, 12:29 PM
I'll take one kit send payment info

natedogg1777
05-04-2008, 3:37 PM
Count me in for one as well...please PM me the particulars. Thanks!

quickcf
05-04-2008, 7:57 PM
I'll take 1 kit.

shooter4ever
05-05-2008, 6:31 AM
I will take two kits and two 19LB Reduced Power Hammer springs.

AlohaRover
05-05-2008, 10:42 AM
If this is still open,
I am interested in 4-6 kits.

Also do you have a source for hammer springs, hammer drop springs, and trigger return springs if you can get them.

shooter4ever
05-08-2008, 8:18 PM
Any news on the purchase?

plinker
05-09-2008, 5:41 PM
I am in for one kit, PM me for in order/payment instructions.

duenor
05-10-2008, 11:43 AM
Hello Everyone,
I apologize for the rather lengthy wait.
The group buy is now officially OPEN. Our factory order is being shipped to us right now.
Each SIG P6/P225 Rearsenal Kit is $19.50 and includes

1x EXP 16LB Recoil Spring
1x EXP Firing Pin Spring
2x EXP 5% 8rd Magazine Springs
All springs are manufactured to specifications exceeding SIG factory requirements and are guaranteed against defects. EXP Recoil springs are expected to last up to 5000 rounds before requiring replacement and will last indefinitely if stored in their original packaging.This will be your cost if picked up at the store (In Baldwin Park, CA, right by Burro Canyon - come with your gun and get some shooting in on the same day). If you would like it shipped to you, simply call in with your CC# and Matt or Lily will take care of you. Shipping will be a few dollars and will be for any number of kits.

Each additional SIG P6/P225 EXP 5% 8rnd Magazine spring will be $5.50.

These first 100 kits are reserved for Calguns members at Calguns pricing; they will be held in reserve only from today (05.10.08) until next Saturday (05.17.08). At closing on that Saturday the CGN group buy ends and both pricing and availability will be at retail rates. As with our P6 buy, there can be no holding of Kits, so you need to call in or drop off your order now.

Kev
kevin@entreprise(.dot.)com

Since we have gotten so many requests for other Kits for other firearms, we will be carrying them in-store soon. For Calguns members, we will have reserve pricing, honored if you conspiratorially whisper us your handle.

ENTREPRISE ARMS - www.entreprise.com (http://www.entreprise.com/)
5321 Irwindale Ave
Irwindale, CA 91706-2025
Phone Numbers : (626)-962-8712
Fax Numbers : (626)-962-4692

Hours of Operation:
Monday - Fridays
8 am - 5 pm PST
1st and 3rd Saturdays
9am - noon
Closed Sundays

duenor
05-11-2008, 3:24 AM
As with before, I will not post names of buyers but will try to maintain a current count of remaining Kits.

Current kits remaining as of 4:23A 05.11: 89

doctor_vals
05-12-2008, 9:57 AM
It is awesome I just call Matt
And very nice and helpful guy in less than a minute took my order.
I like it!!!
:D

duenor
05-12-2008, 2:45 PM
I'm glad we could be of assistance, Dr. Vals.
I just confirmed the flat shipping rate - $6.95 for s/h to anywhere in CA, regardless of number of springs ordered. So if you live next to some guys, just order a bunch and share.

Single pricing for the Recoil Spring Kits is $7.00 P6 16lbs
Single pricing for the Magazine Spring Kits is $7 each +5% EXP
Each Rearsenal Kit comes with one RS kit and two MS kits, so you save $1.50

Both springs come with lifetime warranties against defects in workmanship with free replacement from the manufacturer if found to be defective. Recoil springs are expected to last between 3000-5000 rounds before beginning to show signs of exhaustion; magazine springs also are expected to survive 3000-5000 compressions before exhibiting signs of exhaustion. These are the best springs available on the market.

Kev

kits remaining: 82

siikfrk
05-12-2008, 5:57 PM
is paypal accepted?

duenor
05-12-2008, 9:54 PM
It'd be easier to simply call in and use your CC: (626)-962-8712
In the meantime, I'll try to get admin to authorize an EAI Paypal acount. But it will take some time to get set up.

doctor_vals
05-12-2008, 10:03 PM
I'm glad we could be of assistance, Dr. Vals.
I just confirmed the flat shipping rate - $6.95 for s/h to anywhere in CA, regardless of number of springs ordered. So if you live next to some guys, just order a bunch and share.


I think guys from Bay Area able to handle this shipping charge :p

duenor
05-14-2008, 8:12 PM
78 kits available

GTKrockeTT
05-18-2008, 3:37 PM
Kevin, just caught this thread. Is the buy going on? If so, I'd like to pick up 2 on Monday.

scoobysnax
05-18-2008, 4:58 PM
I went in on Saturday to try to buy a kit but was told that there's a spring missing. Any details about that? I did pay for a kit, and I would have to call in a week or two about the status of the kit.

duenor
05-18-2008, 5:44 PM
scooby,

Thanks for stopping by. The gunsprings factory miscalculated their inventory (or perhaps a standing order). We were given a ship date, then several days later told that this was regrettably incorrect. All springs are expected to be in shortly after Memorial Day (next Monday).

If we had known about this we would not have released the sale (we had already held it for two weeks specifically to ensure that supply was guaranteed), but we had already released via internet and conventional advertising by the time we got the news.

Kev

duenor
05-19-2008, 3:14 PM
68 Kits Still Available

Sale has been extended for Calguns Members

HarrysAllOut
05-27-2008, 9:47 PM
If not too late I'd like to get in on this.

(2) Kits & (2) extra mag springs.

Do you have 19 lb main springs for the P6 as well?

Thanks.

toneman
05-29-2008, 2:09 PM
I need (2) Kits & (2) extra mag springs. please
let me know
Thanks

Someoneelseok
05-29-2008, 8:42 PM
I need (1) kit and can do local pick up, if possible.

duenor
05-30-2008, 5:54 PM
48 kits still available.
price is steady as long as current shipment lasts for CGN members. kits will be ready for in-store pickup on June 4th.

I just saw the huge box of springs today; they look very good.

onikuma, i have your order but i left it at EAI today... forgot

SeANMcBAY
05-30-2008, 8:06 PM
I'll take one kit. I love the P6.

brian24
06-01-2008, 9:33 AM
i would like one kit, thx

1QWKLSX
06-01-2008, 10:00 AM
I would like one with an extra mag spring

c483125117
06-01-2008, 11:24 AM
I would like 2 kits. Thank you.

ciscollector
06-01-2008, 12:12 PM
I would like one kit shipped.

Thanks!

duenor
06-01-2008, 12:13 PM
-please note: posting here does not guarantee you a kit. I am not always on site and cannot physically set aside kits for you.--

If you want a kit, please call us and leave an order via CC. Alternatively, drop by our store during hours and leave your order in person. After June 4th, you may cash and carry the kits (they will be packed up and ready for retail by then).

5321 Irwindale Ave
Irwindale, CA 91706-2025
Phone Numbers : (626)-962-8712
Fax Numbers : (626)-962-4692

Hours of Operation:
Monday - Fridays
8 am - 5 pm PST

Pro Shop
9 am - 5 pm

Pro Shop open
1st and 3rd Saturdays
9am - noon
or By Appt.

Closed Sundays

scoobysnax
06-02-2008, 9:34 AM
Great, I'll try to stop by on Wednesday to pick up my kit.

apbrian112
06-02-2008, 10:29 AM
just ordered mine via phone... thanks!

duenor
06-02-2008, 11:55 AM
37 Kits and Dropping
The reason for the delay in pick-up availability until June 4th is because we bought the entire production lot of magazine springs from the factory. the next production lot won't be ready until mid-july. So these kits are it for now.

Kev

rorschach
06-02-2008, 1:04 PM
I'll take one. I can pick it up.

Triad
06-03-2008, 8:46 PM
I ordered my kit 2+ weeks ago and still havent recieved it...who should I call?

crustyscupper
06-04-2008, 2:46 AM
Please put me down for one kit, and two mag springs, shipping to norcal... I'll call you guys tomorrow.

Saltdog55
06-04-2008, 5:13 PM
I ordered my kit 2+ weeks ago and still havent recieved it...who should I call?

I ordered 3+ weeks ago and cc was charged 3 weeks ago. I called and they still haven't recieved the kits yet. I was under the impression that the kits were in stock. I think we will have to wait a while longer.

duenor
06-05-2008, 6:37 PM
Oops, should have checked this thread earlier. Sorry, guys.
We placed the order and were assured delivery within the week. But then it turns out that someone up north had gotten the same idea as us and bought out the entire inventory. So, a special order had to be express produced for us. The entire order was an EAI exclusive, and the springs you are getting were produced in May 2008, about as fresh as you can get.

They all came in June 4th. Anyone who placed a mail order will be receiving them as we start shipping them out in the order received, and if you want you are welcome to come down and pick it up in person.

Once again, all kits are here and accounted for. We have about 35 remaining.

kev

!@#$
06-06-2008, 1:22 PM
i will call today for one kit.

marxdspot
06-06-2008, 1:28 PM
Just picked mine up today. Nothing less than high quality. Get yours while you can folks. If you have one of these P6's, it's definitely worth it.

Oh...and EAI has great customer service, too.

duenor
06-06-2008, 2:25 PM
Cool, thanks Marx.
I'll be bringing about half of the remaining 30-something or so kits to the Costa Mesa show tomorrow (or, rather, Matt will be). Hope to see some of you guys there.

Kev

c483125117
06-06-2008, 3:12 PM
Picked up two kits today. Quick and easy.

Saltdog55
06-06-2008, 7:21 PM
I just got mine in the mail today.

Now I need to buy a couple extra mags at the show tomorrow.

Thanks

zippo
06-12-2008, 11:06 PM
order on Monday and recive in mail on Wen.
Thank

cal_ar_shooter
06-14-2008, 6:51 AM
Put me down for 1 kit pluse 2 extra mag springs...
I will call with CC today......

duenor
06-14-2008, 1:40 PM
ah, brandon lee. what a sad case of stupid SE engineers - it's what happens when you try to skimp on blanks by trying to make your own out of live rounds...

today is a good day for a cc call.. hope you called before 12pm though as we close after 12. if you didnt get through just call on monday or email matt.

cal_ar_shooter
06-15-2008, 8:32 PM
ah, brandon lee. what a sad case of stupid SE engineers - it's what happens when you try to skimp on blanks by trying to make your own out of live rounds...

today is a good day for a cc call.. hope you called before 12pm though as we close after 12. if you didnt get through just call on monday or email matt.

Tried on Sat but will call again on Monday...

Thanks.....:)

berto
06-16-2008, 11:15 AM
Called and ordered. Easy transaction. Thanks.

rayrayz
06-18-2008, 11:56 AM
called and ordered on friday and was told that it will ship on Monday. It is Wednesday and still waiting:confused: ( was told that it would be 2 days)

AlohaRover
06-18-2008, 1:56 PM
Mine were waiting for me when I got back from vacation. Thanks again.

rayrayz
06-19-2008, 4:32 PM
wow...what is going on here...?? it is now the end of business day on Thursday and still no re-arsenal kit. called in and tried to leave a message but the mailbox was full. This is not good.

Para
06-19-2008, 5:49 PM
I think maybe you are stressing just a wee bit to fast. Give them a call tomarrow during business hours.

kperry
06-20-2008, 10:04 AM
Just put in an order for my incoming P6...

liketoshoot
06-23-2008, 3:49 PM
Thanks, just ordered my kit.
got the gun today and will shoot it tomorrow, (before my kit gets here). but I shoot 2 times a week so my gun will have new springs in it next time.

duenor
06-23-2008, 7:52 PM
rayrayz, you have PM.

rayrayz
06-23-2008, 10:57 PM
Thanks duenor for the follow up.
I just got the package on Sat. (I think as I was out of town) Still have not tried it yet. thanks

12many
06-27-2008, 7:42 PM
Are these still available?

duenor
06-27-2008, 8:27 PM
Yes. We are down to a little over a handful.
You should call it in now. We do not expect to be doing this again. Click on the website in my sig line.

Para
06-27-2008, 9:02 PM
I'll call you monday with payment info. I would like 2 of your rearsenal kits.

Draven
06-28-2008, 8:10 AM
Just checking, but you still have some, right? I'd like to just come into the store and grab one.

12many
06-28-2008, 8:44 AM
I tried calling but I cant get though. All the voicemail boxes are full.

Matt@EntrepriseArms
06-28-2008, 1:41 PM
I tried calling but I cant get though. All the voicemail boxes are full.


Call us during our business hours - Mon-Fri from 9am-5pm.

No, we don't have voicemail.

Danield
06-30-2008, 8:32 AM
:Ivan:

12many
07-03-2008, 5:03 AM
I called my order in on Monday and had my kit in the next day. i will definitely buy from these guys again. thanks a lot guys.

Danield
07-03-2008, 8:08 AM
I called my order in on Monday and had my kit in the next day. i will definitely buy from these guys again. thanks a lot guys.

I did the same exact thing. Great service.

duenor
07-04-2008, 8:26 AM
thanks danield.
heheh... i'm so tickled to star in three sig lines...

cal_ar_shooter
07-06-2008, 5:38 AM
Received my kit quickly. Very happy with it.:D

+1

Matt@EntrepriseArms
07-07-2008, 10:46 AM
We are officially sold out of the re-arsenal kits, but still have magazine springs availible.

Nemo
07-07-2008, 1:26 PM
any plans to restock the kits?

Draven
07-07-2008, 5:53 PM
Glad i got one when i did :)

SeANMcBAY
08-18-2008, 8:55 PM
Hope you guys can get some more. I really need one. :(