PDA

View Full Version : Anybody have an extra MagLock long screw?


BlackReef
04-22-2008, 6:49 PM
Stripped the screw trying to remove it with the tiny allen wrench. It went from bad to worst when I busted out the channel locks. :43:

all units please advise

hawk1
04-22-2008, 6:52 PM
I have both the long screw and the short one. PM me an address and I'll send it out in the morning. :)

Prince50
04-22-2008, 7:16 PM
If it is a Prince50 with the 4-40 x 3/4 in screw, I can send you a replacement free. If you were able to strip it it sounds like a Knockoff with a 2-56 x 3/4 inch screw.

Let me know.

BTW...Thanks Hawk1.

Darin

hawk1
04-22-2008, 7:27 PM
I have it packaged up and will send in the morning Darin.

BlackReef
04-22-2008, 7:40 PM
I have it packaged up and will send in the morning Darin.


Thanks for the offer Prince 50, but hawk1 is on it. Thanks man I appreciate it!

ghost
04-22-2008, 7:43 PM
i did the samething before,not knowing that some of the prince50`s have two set screws instead of one.i took a dremel to it and now its been replaced with a bb.i dont think i`ll ever use a maglock ever again;)
cracking your rifle open and top loading sucks ***!