PDA

View Full Version : GSG missing stock screw


mike452
04-22-2008, 1:46 PM
Just got my GSG and the screw/bolt for the stock is not in the box.

Anyone have measurements for it so I can get a replacement from mcmaster.com?

Who knows how long ATI will take to mail me another one. They havenít replied to my e-mail yet.

tay
04-22-2008, 1:49 PM
Look in the cardboard insert within the box, it is attached to it.

Just got my GSG and the screw/bolt for the stock is not in the box.

Anyone have measurements for it so I can get a replacement from mcmaster.com?

Who knows how long ATI will take to mail me another one. They havenít replied to my e-mail yet.

mike452
04-22-2008, 1:54 PM
I looked everywhere and now flatten the box and all cardboard in it, but found nothing.

Was the screw in a bag or just taped to the cardboard?

marxdspot
04-22-2008, 4:11 PM
I had the same problem. I went to a local hardware store and found a screw with the same thread, but they had nothing that matched in color and diameter of the screw head. So, I ended up using a washer with the screw that I purchased. It works, but cosmetically, it stands out. I'm either gonna Alumahyde it or contact ATI for a replacement. I'd tell you what thread size I got, but when I found something that worked, I jammed outa the store to install it into the GSG-5. So, I didn't get the size. I found the screw at Virgil's Hardware store in Glendale.

Quiet
04-22-2008, 6:24 PM
I looked everywhere and now flatten the box and all cardboard in it, but found nothing.

Was the screw in a bag or just taped to the cardboard?

Screw should have been screwed into the cardboard near the stock.