PDA

View Full Version : Double check me on this scope mount please...


XDRoX
08-20-2014, 10:47 AM
Before I order would you guys please double check my measurements to make sure this mount will work with my rifle?
Thanks

Here's the scope dimensions:
http://content.midwayusa.com/tech_note_images/scope_spec_diagram.gif
A: 14.5
B: 5.2
C: 2.0
D: 1.9
E: 3.65
F: 5.8
G: 2.51
H: 1.65

Here's the mount I want:
http://www.burrisoptics.com/images/AR-PEPR.jpg

http://www.burrisoptics.com/images/PEPR_diagram.jpg

C:1.50"
D:4.17"
E:2.15"




...

CK_32
08-20-2014, 11:23 AM
Centerline of the scope Obj lens should be 1.255 above the rail. Your rings say 1.5 so you should have .255" to spare.

That said what is the D and E measurement? Be sure the rings will sit and not contact the bells of the scope.


Also before you buy take a look at ADM. QD levers and solid AR scope rings and have several options. Just throwing that out there if you haven't given them a look yet, to make sure you get the most for your $$ and rifle mount.

GL

XDRoX
08-20-2014, 11:35 AM
Centerline of the scope Obj lens should be 1.255 above the rail. Your rings say 1.5 so you should have .255" to spare.

That said what is the D and E measurement? Be sure the rings will sit and not contact the bells of the scope.


Also before you buy take a look at ADM. QD levers and solid AR scope rings and have several options. Just throwing that out there if you haven't given them a look yet, to make sure you get the most for your $$ and rifle mount.

GL

Thanks. I edited my OP.
And I will check out the ADM.

Trriemferent
08-20-2014, 11:44 AM
I found a few sites that were pretty useful to me

http://www.mil-rad.com/scope_ring_calculator
http://www.mil-rad.com/scope_cant_calculator
http://www.mil-rad.com/scopes
http://www.mil-rad.com/rings

kcheung2
08-20-2014, 12:35 PM
Unless you're using a 50mm+ objective, PEPR mounts accommodate most common sized scopes.

russ69
08-20-2014, 1:04 PM
Before I order would you guys please double check my measurements to make sure this mount will work with my rifle?...

It might help if you tell us what rifle, just saying.

XDRoX
08-20-2014, 2:04 PM
It might help if you tell us what rifle, just saying.

This upper.

http://palmettostatearmory.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/4/6/46782.jpg

jdben92883
08-20-2014, 2:13 PM
You sure you've got your dimensions correct? You have 2.51" O.D. for "G"...that would be close to a 60mm objective!!

P.E.P.R.s hold the optics pretty high. Even if your 2.51" is accurate, you would be fine with a P.E.P.R.

XDRoX
08-20-2014, 2:22 PM
It's a 50mm scope. I may just take the scope to LGS tonight and see what they have in stock.

BrassCase
08-20-2014, 6:43 PM
I have a Larue QD mount and the Burris QD PEPR mount. Both work well. The rails section caps for the Burris are optional to install, it comes with the rail caps and plain caps.