PDA

View Full Version : MEGA Gator AR15 upper & lower matching sets @ Metroshot!


SFV_Dealer
04-07-2008, 1:32 PM
We got these beauties in for those that want a perfect upper / lower receiver match for their next AR build:
9120
Matching M4 feedramped A3 flattop upper.
$275 for the set plus tax and DROS. These have M4 cuts for SPR and M4 builds.

We do custom builds and can have a custom one of a kind (no box stock rifle) in your hands in usually 2 weeks!

- any milspec quality barrel & parts can be installed - please no third tier parts!
- we stock 2 of the highest quality barrels: 14.5" Colt M4 1x7 military barrels for $375 and SPR 18" Douglas air gauged 1x7 Wylde chamber $550 - if you want the BEST! :eek:
- complete SPR, M4, Varmint, Heavy Barrel, lightweight, 14.5" to 24" you name it we can do it!
- custom Duracoating services like this ACU digital camo rifle as an example:
If you wish to buy separate - see my website for pricing....
9410
9121

SFV_Dealer
04-18-2008, 2:07 PM
Here they are separated.
If you want to buy separate -
Lower = $185
Upper = $110
http://img.villagephotos.com/p/2005-5/1004391/Mega_Upper_Lowers1.JPG
But both upper and lower together as a matching set and save $20 !

EvolvedRaven
04-30-2008, 5:20 PM
How about a CMT Upper with FA and a Stripped 14.5" barrel (No front sight) both M4 feed and detached rdy for a build? Let me know ASAP!

spex
04-30-2008, 7:56 PM
Hello Sir, I'm interested in just the upper. How much will it cost to ship to CA zip code 93705? Thanks for your info. If possible Total price shipped.

SFV_Dealer
05-01-2008, 7:39 AM
EVOLVEDRAVEN: Yes we can do a custom build for you - we stock and use LMT F/A BCG and Colt M4 14.5" 1x7 barrel w/ permanent flash hider welded. What type of handguards did you want ?

spex: Yes we can ship the upper only $110 plus $5 via USPS.

EvolvedRaven
05-01-2008, 8:28 AM
EVOLVEDRAVEN: Yes we can do a custom build for you - we stock and use LMT F/A BCG and Colt M4 14.5" 1x7 barrel w/ permanent flash hider welded. What type of handguards did you want ?

Finally, Someone willing to help me! How long would it take to order one and get it to me? What will it cost?

I was originally looking for CMT Upper but any Decent Upper will do (as long as it's a flat top), With FA, Dust Cover and M4 Ramps.

I would like a VLTOR Flash hider Model # VC-1

http://www.vltor.com/flash-hiders-gallery.html#p2

Also the barrel im looking for is something like this with no front sight and a Carbine Gas length System. ** M4 Ramps **

http://i61.photobucket.com/albums/h77/TBEvo/714.jpg

MI Freefloat Carbine Forearm

http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_id=70

VLTOR Low Profile Gas Block

http://www.vltor.com/lpgb.htm

Any Carbine Length Gas System will do. I will get some flip up sights at a later time. Let me know ASAP. I am trying to get this within 2 weeks or so...

Let me know when you want the payment...


Danny

spex
05-01-2008, 4:36 PM
Thanks for the prompt response. Just to clarify before I place an order,
The upper is just stock right, or does it come with forward assist, ejection cover. Please let me know, thanks again.

gregshin
05-01-2008, 4:55 PM
these are some very hi quality lowers and uppers! i went to go inspect them myself and they were first rate!

spex
05-01-2008, 6:59 PM
thanks for the input gregshin...

aplinker
05-01-2008, 9:48 PM
A custom built upper in two weeks is pretty ambitious.

Since you're getting a low profile gas block I'd highly recommend getting a longer handguard rail - covering the gas block - to give a longer sight radius. I'd also pick the Daniel Defense Lite rail over the MI, but that's just me. :)

Is there a reason you're insistent on carbine gas over, say, mid-length?

Finally, Someone willing to help me! How long would it take to order one and get it to me? What will it cost?

I was originally looking for CMT Upper but any Decent Upper will do (as long as it's a flat top), With FA, Dust Cover and M4 Ramps.

I would like a VLTOR Flash hider Model # VC-1

http://www.vltor.com/flash-hiders-gallery.html#p2

Also the barrel im looking for is something like this with no front sight and a Carbine Gas length System. ** M4 Ramps **

http://i61.photobucket.com/albums/h77/TBEvo/714.jpg

MI Freefloat Carbine Forearm

http://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_id=70

VLTOR Low Profile Gas Block

http://www.vltor.com/lpgb.htm

Any Carbine Length Gas System will do. I will get some flip up sights at a later time. Let me know ASAP. I am trying to get this within 2 weeks or so...

Let me know when you want the payment...


Danny

SFV_Dealer
05-02-2008, 5:35 AM
Thanks UCLAPlinker!
Yes 2 weeks is a bit ambitious for a custom build since we are open on 2 days a week.

We can do 2 - 3 weeks if the parts are all available but a lot of stuff since the 2008 election run and the current anti firearms atmosphere has created a huge backlog in all firearms - we are heavily backordered on: LMT F/A BCG, LMT or VLTOR milspec buffer tube & weights, complete Stag & RRA Uppers, VLTOR EMOD stocks, M1A/M14 VLTOR pistol grip stocks.

We do have stock parts in stock and I do agree that DD rails are much better than the MI...

Take a look at our Daniel Defense midlength complete upper we just got in - that is a complete upper ready to shoot w/ military tested parts similar to Colt.

www.metroshotfirearms.com/shop.html

The mid or rifle length gas system is also better than the carbine gas system for reliability and cycle recoil.... All my AR15 assault weapons that I personally own are either rifle length (SPR) or mid length (5.56mm) and only 1 rifle is carbine which is 6.8mm lefty.

My 5 cents....