PDA

View Full Version : US made Black AK-47 stock sets


Redchevyman
03-18-2008, 6:38 PM
These New 3 peice stock sets are made for stamped receiver AK47 rifles. This will fit Romanian, Bulgarian, Hungarian, Polish and many other european made AK rifles. This will not fit the Yugo or RPK. The set includes stock, pistol grip along with upper and lower hand guards. The buttstock is patterned after the original Bulgarian fixed stock for the AK, this stock allows you to retain the original look of your AK. The stock comes complete with a metal buttplate and a sling swivel on the side. The stock is original Warsaw length ( 9-1/2" measured from back of receiver to butt plate). Also inluded is 2 mounting screws and a drill bit. Manufactured in the U.S. and constructed of military grade composite. This set of items counts as 3 U.S. Sec 922R compliant parts. I can accept credit cards, Paypal or Postal money orders. These are available at http://www.rcmgunparts.com
The sets are $60.00 each plus shipping. Also available without pistol grip for $50.00 plus shipping.

Shipping is a flat $5.00 for as many sets as you need.
http://www.gunco.net/gallery/data/500/medium/IMG_0224_Medium_.jpg

JTROKS
03-18-2008, 7:12 PM
I just want the pistol grip and handguards....

sszeto
03-18-2008, 7:24 PM
I'll take it.

Redchevyman
03-18-2008, 7:45 PM
I just want the pistol grip and handguards....Pistol grip and handguards are $32 plus shipping.
PM Sent

Redchevyman
03-18-2008, 8:03 PM
I'll take it. That should be "I'll take one.... I have more available :yes:

brokestudent12
03-18-2008, 8:22 PM
nice set

sbjmg
03-18-2008, 8:44 PM
How much for just the hand guards shipped?

Also how hard is it to switch out my wood ones or these?

Blue
03-18-2008, 8:44 PM
Where are you located?

Kmullen
03-18-2008, 8:51 PM
I would like one. If You have any left
Kevin

Redchevyman
03-18-2008, 9:18 PM
I would like one. If You have any left
Kevin
I do have some left. PM sent

Redchevyman
03-18-2008, 9:44 PM
Where are you located?Southbay. But the stocks are mail order only.

aratron
03-18-2008, 10:56 PM
I'll get a set without the pistol grip

GSequoia
03-18-2008, 11:00 PM
http://san1.atlanta.gbhinc.com/GB/094967000/94967755/pix200400578.jpg

Do you still have any stock sets?

Also does it use a standard AK butt plate?

Redchevyman
03-18-2008, 11:11 PM
Do you still have any stock sets?

Also does it use a standard AK butt plate?I have some left. These come with a butt plate installed already.

GSequoia
03-18-2008, 11:12 PM
I have some left. These come with a butt plate installed already.

I saw that - I'm curious if it's the same as an AK plate so I can pick up an AK 1" rubber plate...

Redchevyman
03-19-2008, 12:46 AM
The plate is the same size and shape as a original AK-47, But the screws are spaced further apart by a little. You should be able to mount the rubber spacer by drilling holes in the new plate.

weezil_boi
03-19-2008, 1:34 AM
I'll take three sets of handguards and stocks if available, no pistol grips please.

PM comming.

Redchevyman
03-19-2008, 6:39 AM
I'll take three sets of handguards and stocks if available, no pistol grips please.

PM comming.
PM returned, I have you covered.

MrNiceGuy
03-19-2008, 12:15 PM
I'll take 1 set with no pistol grip.
PM inbound.

Baron
03-19-2008, 4:40 PM
PM sent

Redchevyman
03-19-2008, 5:00 PM
I have about 3 sets left

Redchevyman
03-19-2008, 6:20 PM
Please PM me after you post.

Redchevyman
03-20-2008, 6:19 PM
anyone else need a set of these?

Pointcrossed
03-20-2008, 9:58 PM
I would like a set please.

Baron
03-21-2008, 9:32 AM
Redchevyman,
I just wanted to say thanks I recieved to stock set quicker then I thought. They look great too. I can't wait to pick up my AK on the 28th.

Thanks again and I think that's the fastest shipping I've seen in a long time

Redchevyman
03-22-2008, 6:08 PM
I would like a set please.
invoice sent. 2 sets left

Redchevyman
03-25-2008, 12:30 AM
They are still available

BULLET8071
03-25-2008, 1:53 AM
They are still available

pm sent. id like to take 1 complete set

Pointcrossed
03-25-2008, 7:19 PM
I got the Stock set yesterday. Do you work for the post office, because it got here very fast. Way better than I expected. Thanks again!

Redchevyman
03-26-2008, 6:39 AM
I will be getting more of these stock sets today as soon as UPS gets here.

pbrand
03-26-2008, 8:57 AM
Anyone got a pic of this set installed on an AK? I am interested in this set but I already have the black Kvar Polymer. I like the shorter stock compared to my NATO length one because it is more comfortable for me.

wikidklown
03-26-2008, 10:26 AM
Redchevyman, I'll take a set. PM'd you regarding payment....

Baron
03-26-2008, 10:41 AM
Anyone got a pic of this set installed on an AK? I am interested in this set but I already have the black Kvar Polymer. I like the shorter stock compared to my NATO length one because it is more comfortable for me.

Friday I'll be picking up my WASR-10 and I'm planning on installing my kit after I break it all down and de-grease it. I'll take a pic as soon as I can.

Redchevyman
03-26-2008, 6:15 PM
I would like a set please.Invoice sent.

Redchevyman
03-27-2008, 4:57 PM
I have plenty of stocks available now.

shin_en
03-28-2008, 11:50 PM
pm sent!

wikidklown
03-29-2008, 1:16 AM
That was fast, I got my set already, Redchevyman, thanks for the savings you've passed on to us!

pbrand
03-29-2008, 8:58 PM
PM sent

Redchevyman
03-30-2008, 12:04 AM
PM sent

Parts shipped

DrunkSkunk
03-30-2008, 4:46 AM
any more left?

Redchevyman
03-30-2008, 6:32 AM
any more left?
Yes, I received another batch of 20 sets. I have lots of them left.

pbrand
04-02-2008, 11:01 AM
PM Sent

Redchevyman
04-02-2008, 4:18 PM
PM Sent
Invoice sent

BULLET8071
04-03-2008, 1:49 AM
thanks redchevyman...ridiculously fast shipping!! great products

Redchevyman
04-04-2008, 11:24 AM
thanks redchevyman...ridiculously fast shipping!! great products
Customer service is very important to me so I take the time to ship as soon as payment is received.

pbrand
04-04-2008, 10:22 PM
Is it just me or is the lower hand guard missing the required hole to insert the cleaning rod? Am I supposed to drill my own?

BTW thanks for the instant fast shipment.

cj cake
04-04-2008, 11:14 PM
Are these KVAR stocks?

ivanimal
04-04-2008, 11:38 PM
PM sent

Redchevyman
04-05-2008, 12:48 AM
Are these KVAR stocks? No they are not

BULLET8071
04-05-2008, 3:37 AM
Is it just me or is the lower hand guard missing the required hole to insert the cleaning rod? Am I supposed to drill my own?

BTW thanks for the instant fast shipment.

i drilled my own hole..

Harrison_Bergeron
04-05-2008, 12:11 PM
Any installed pics yet?

pbrand
04-05-2008, 1:24 PM
I still need to drill into the lower hand guard for the cleaning rod. I like the looks now but I know it will look better with the cleaning rod.

I spray painted the rear butt plate matt black.

My butt plate did not fit snug and was a little loose so I used a piece of electrical tape over the rear insert of the lower hang guard to get that snug fit.

Here are some pics:

http://www.upitall.com/Private/u/70/112/1624

http://www.upitall.com/Private/u/70/112/1625

Redchevyman
04-06-2008, 4:37 PM
My butt plate did not fit snug and was a little loose so I used a piece of electrical tape over the rear insert of the lower hang guard to get that snug fit.

I have not found any loose butt plates on any of these stocks.

Is that a home built receiver? The stock set fits very snug on NDS receivers and on WASR-10 receivers. A home built may be a bit taller giving a bit of looseness depending on how high the top rails were bent.

weezil_boi
04-06-2008, 5:07 PM
Are these KVAR stocks?

I got three.. they are Tapco

pbrand
04-06-2008, 7:52 PM
I have not found any loose butt plates on any of these stocks.

Is that a home built receiver? The stock set fits very snug on NDS receivers and on WASR-10 receivers. A home built may be a bit taller giving a bit of looseness depending on how high the top rails were bent.

That was my mistake. I meant the lower hand guard was a little loose, but yes I should have mentioned mine was a home bent receiver.

Redchevyman
04-10-2008, 10:57 AM
I still have more stocks sets available.

Redchevyman
04-13-2008, 10:22 AM
I may get these made in OD green if poeple are interested.

Redchevyman
04-17-2008, 9:59 PM
Some pics of the stock on a dummy receiver with a AK-74 style muzzle brake
http://www.gunco.net/gallery/data/500/IMG_0354.jpg
http://www.gunco.net/gallery/data/500/IMG_0344.jpg
http://www.gunco.net/gallery/data/500/IMG_0345.jpg

cactus
04-18-2008, 12:03 AM
I may be interested in the OD green what would the price be and when would they be available?

Redchevyman
04-18-2008, 3:19 PM
I may be interested in the OD green what would the price be and when would they be available?

I am getting the hand guards in "two weeks". I will only get ten as a sample. Getting more may take months after that. I will post here when they come in.

NRAhighpowershooter
04-18-2008, 6:59 PM
I'll take a set PM sent :D

cactus
04-18-2008, 9:26 PM
I cant commit to an " ill take it" when I dont know the price, but I am very interested in the OD green so please let me know when they come in. Thank you.

Redchevyman
04-25-2008, 11:08 AM
The OD Green stock sets are here. I was only able to get 7 at this time. The foregrips are lighter green than the pistol grip and butt stock. If you are picky about this please do not order any of these.

They cost me more than the black sets but since they are not a perfect match I will sell them for the same price as the black. $60 plus shipping.

http://www.gunco.net/gallery/data/500/medium/IMG_0390.jpg
http://www.gunco.net/gallery/data/500/medium/IMG_03881.jpg

joeker
04-26-2008, 12:03 AM
Any left? I'd like one. The black set.

Redchevyman
04-27-2008, 3:56 PM
I do have many options available for both black and green stock sets.

1.I have the original style green sets with the factory style hand guards, The hand guards are lighter in color then the pistol grip and butt stock $60.00 plus shipping.
http://www.gunco.net/gallery/data/500/medium/IMG_03881.jpg



2. I have the green set with the galil style hand guard that is a perfect color match $70.00 plus shipping.
http://www.gunco.net/gallery/data/500/medium/IMG_0411.jpg



3. I have black stock sets for $60.00 plus shipping.
http://www.gunco.net/gallery/data/500/medium/IMG_0343.jpg



4. I also have a black stock set with the Tapco Fusion hand guard with the built in lower rail for using a foregrip for $90.00 plus shipping.
http://www.gunco.net/gallery/data/500/stk06311.jpg


5. Black stock set with Tapco Fusion fore grip and TAPCO vertical grip $110.00 plus shipping. (red dot scope and upper mounting rail not included).
http://www.gunco.net/gallery/data/500/medium/IMG_0352.jpg

cactus
05-02-2008, 12:12 AM
Ill take it the green set that is pm inbound for payment info. and thank you

Redchevyman
05-06-2008, 10:09 PM
Still have both colors available.

Redchevyman
05-09-2008, 4:34 PM
I have 1 only of the new TAPCO Fusion OD green forend set with OD green TAPCO vertical grip. $65 plus $5 shipping for the fore grip and the vertical grip. The combo is regularly $75 from TAPCO.

First I will take it gets it. PM me to let me know you claimed it.

Redchevyman
05-14-2008, 4:18 PM
I will have one TAPCO T6 6 postition black buttstock available Friday if anyone wants it.

Redchevyman
05-23-2008, 11:01 PM
Black Tapco T6 buttstock is also available as an upgrade. add $15 to the fixed stock set price.

Redchevyman
11-21-2008, 7:20 AM
The original style hand guards now come with the cleaning rod hole pre drilled for you.

Ninja45
11-21-2008, 11:02 AM
How much is the buttstock and the grip only?

Never mind, I found it in your website.

Ninja45

Redchevyman
11-27-2008, 10:43 PM
How much is the buttstock and the grip only?



Ninja45

26.99 for the stock and 21.99 for the fore grip. $5.00 for shipping

spex
11-28-2008, 10:37 AM
Hello, Do you know if this will fit the SAIGA's? I was planning on installing on a Saiga Rifle 7.62x39. Thanks

Redchevyman
12-20-2008, 8:33 AM
Hello, Do you know if this will fit the SAIGA's? I was planning on installing on a Saiga Rifle 7.62x39. Thanks
This set will not fit the Saiga unless the trigger guard has been move forward. The front hand guard will not fit a Saiga without using a adapter.

JagerTroop
12-20-2008, 10:03 AM
Just purchased mine. Thanks RCM

Redchevyman
01-26-2009, 8:07 PM
I am running low on these right now. If you want one I would not wait. I will get more in a couple of weeks but my cost on them went up substantially.

telcolineman
01-26-2009, 8:24 PM
would you sell just a butt stock? will it fit a forged reciever?

Thanks Jim

Very interested

Redchevyman
02-28-2009, 7:33 PM
would you sell just a butt stock? will it fit a forged reciever?

Thanks Jim

Very interested
I sell all the parts individually if you want. The butt stock will fit stamped receivers but will not fit milled receivers.
The front hand guards now come drilled for the cleaning rod.

B.D.Dubloon
02-28-2009, 8:00 PM
Bump for a good seller

Redchevyman
03-02-2009, 4:58 AM
I still have a few green original grip sets available as seen in the top picture in post #65 above. PM me to get them since they are not listed on my web site.

Redchevyman
04-23-2009, 1:13 PM
Still selling the black sets for those who are wondering.:rolleyes:

4thSBCT
05-19-2009, 9:47 PM
I'd like a set please. Do you take pay pal?

Redchevyman
07-05-2009, 12:13 PM
I'd like a set please. Do you take pay pal?

Yes I take credit card , money order and paypal.

chrisdesoup
07-05-2009, 3:30 PM
ordered one through your site.

thanks!

-Chris

Redchevyman
10-05-2009, 7:59 PM
I have plenty of the stock sets available :rolleyes:

Gregchico
10-05-2009, 10:34 PM
Bump for easy ordering via website. Thanks for the good deals.

Redchevyman
10-06-2009, 6:42 PM
I have a couple of T6 stocks for milled receivers. PM me for details

AR152be
10-06-2009, 7:44 PM
Do you have any left?

Redchevyman
10-07-2009, 7:29 PM
Do you have any left?

I have plenty of all parts on my web site.

Redchevyman
10-11-2009, 10:26 AM
I also have side folder stocks and T6 stocks on hand.

AR152be
10-11-2009, 10:11 PM
PM sent

ruffstock
10-12-2009, 11:32 PM
I will take one set that includes the fore grip and back stock , no pistol grip needed.

Redchevyman
10-24-2009, 11:16 AM
I will take one set that includes the fore grip and back stock , no pistol grip needed.
The parts of this set are all available ala carte on my web site.

Redchevyman
11-20-2009, 7:09 PM
If you want to use gunpal for any parts on my web site you can send the payment to the email address listed on my site. service@rcmgunparts.com
Be sure to include the $5 flat rate shipping.

mds2004
11-21-2009, 1:58 AM
How much for just pistol grip and stock, but no handguards? My brother may be interested for his Saiga conversion.

Redchevyman
11-21-2009, 12:57 PM
How much for just pistol grip and stock, but no handguards? My brother may be interested for his Saiga conversion.
The butt stock is $26.99 and the pistol grip is $11.99

Redchevyman
11-25-2009, 2:48 PM
...................

Redchevyman
12-01-2009, 7:12 PM
see my web site for all the different stock options available.

Redchevyman
02-25-2010, 8:32 AM
Still selling these until supply runs out.

Seesm
02-25-2010, 1:01 PM
Nice... When I build a AK pattern rifle I will check you out...