PDA

View Full Version : Need Scope ring advise on Remington 700


muddy4x4
09-10-2013, 10:26 PM
I just bought a Nikon ProStaff 3-9x40 BDC Scope and now I need some scope rings for it to mount to a remington 700. I was looking at the Remington integral scope mounts, but I don't know if I need the high, medium, or regular ones.

Any help would be great! :cool2:

mound
09-10-2013, 11:05 PM
I have a 6-24x50 Vortex and I got the Burris 30mm low rings. Still have a little over 1/4" between bell and barrel. Hope that helps.

CobraRed
09-11-2013, 8:14 AM
Low

jetman624
09-11-2013, 9:29 AM
Keep in mind that "low" "med" and "high" are not the same from manufacture to manufacture, nor do they always measure from the same place on the ring.

You are probably ok with low rings, but a little math is involved if you really want to be sure.

AlliedArmory
09-13-2013, 5:04 AM
Keep in mind that "low" "med" and "high" are not the same from manufacture to manufacture, nor do they always measure from the same place on the ring.

You are probably ok with low rings, but a little math is involved if you really want to be sure.


:iagree:

muddy4x4
09-13-2013, 10:31 AM
Thanks for your help everyone!!

SmallShark
09-14-2013, 2:04 AM
Leupold Mark 4 base and ring. Picantinny style is easy to install

outbrakeridah
09-17-2013, 6:22 AM
Look into the DNZ game reaper one piece mounts. I have them on a few of my rifles and works really well.