PDA

View Full Version : ...


DedEye
12-08-2007, 6:07 PM
...

uscbigdawg
12-08-2007, 8:40 PM
Frankly, I'm a big fan of the Viking Tactics sling. It's simple, comfortable, quick and unlimited in adjustability. Has the option of an adaptor just for mounting to A2 stocks. Plus, I'll put Kyle Lamb's credentials (maker of the sling) against ANYONE's.

The V-Tac sling is also available from Larue & Blackhawk.

Rich

ar15barrels
12-08-2007, 9:58 PM
Found this (http://www.blueforcegear.com/product.cfm?type=cat&cat_id=1&prod_id=57), does anyone have opinions on whether or not it will fit with a MMG?

I run that mount on my A2 stock.
You would need to slightly clearance a MMG to use that mount.

Sgt Raven
12-08-2007, 10:26 PM
Thanks Rich. I also found a GG&G rear sling adapter for fixed stocks that looks like it will do the trick, now I just have to decide between HK hooks or the loop adapter for the sling.


GG&G has a new style adapter out that isn't shown on their web page yet that has both a slot that has a bump in it for a hook. You can see them in their magazine adds. :cheers2:

ar15barrels
12-08-2007, 11:31 PM
Would the GG&G necessitate modification of the MMG as well?

This one would not need any changes to the MMG:

http://www.gggaz.com/uploaded_images/Rec%20End%20Plate%20Fixed%20Stocks/RecEndPlateFixedStocksColla.jpg

Sgt Raven
12-08-2007, 11:52 PM
This one would not need any changes to the MMG:

http://www.gggaz.com/uploaded_images/Rec%20End%20Plate%20Fixed%20Stocks/RecEndPlateFixedStocksColla.jpg

Look at that one and add a little half round to the outside leg of the loop and you have the new style.

Sgt Raven
12-09-2007, 12:25 AM
Gotcha, it's got both the loop and HK hook. Best of both worlds.

I think I'm gonna go with that mount, now I just have to choose a 3 point sling to go with it. Suggestions?

I was wrong, it only for CAR stocks now.
http://www.gggaz.com/uploaded_images/MURP/MURPCollage.jpg

But they have this one for fixed stocks too.
http://www.gggaz.com/uploaded_images/Fixed%20Stock%20REP%20For%20Snap%20Clips/REPFixedStockSnapClipCollag.jpg
I bet they make one that will work with both styles if enough people ask for it. ;)

Sgt Raven
12-09-2007, 12:31 AM
Didn't realize it was a single point sling mount. I don't like the rear attachments for single point slings that go around the end of the A2 stock, they don't appear sturdy enough. Of course, I've never used one so my opinion is based on inadequate data, but I was under the impression that a three point sling could use this mount as well.

I have a Giles three point sling and the rear mount is stout as he!!. Mine is like this and ties into the swivle and goes around the stock,
http://i9.photobucket.com/albums/a83/supanate7/GilesSling.jpg