PDA

View Full Version : Need help with some measurements(AR)


4 Brigada
10-09-2007, 6:58 PM
I recently purchased a 16.5 inch upper, and I measured my Car type buttstock at 6.5 inch at the minimum extension past the detent, I dont have the total measurement of the upper and lower put together (waiting for my lower), I think that this combination doesnt meet the 30 inches overall rule. Im confused because I see the same type setups on Calguns

Prc329
10-09-2007, 7:03 PM
I'm sure it will. I had a few that came to 33 inches at the smallest collapsed stock.

wilit
10-09-2007, 7:12 PM
My AR has a 16" upper (no muzzle device). It's 24" from tip to the end of the lower where the buffer tube attaches. So if you CAR is 6.5 collapsed, you should be at 31" when complete.