PDA

View Full Version : The New Daniel Defense 5.56 Salt Bath Nitride 16" Mid-Length Lightweight Barrels


AlphaOps
11-21-2012, 5:17 PM
An AlphaOps Exclusive! - Click Here to View Pricing! (http://www.calguns.net/calgunforum/showthread.php?t=647057)
We're excited to announce the arrival of the All New Daniel Defense 5.56 Salt Bath Nitride 16" Mid-Length Lightweight Barrels with 1/7 twist!

http://www.alphaops.com/images/A_DD_Main.jpg

Yup! Finally a lightweight, mid-length, cold hammer forged 5.56 salt bath nitrited (SBN) barrel! Through our search for the best multipurpose AR, we have found that the barrel can make or break ones relationship with a rifle. A rifle needs a barrel that is accurate, reliable, durable, and requires minimal attention to perform as expected. Our search for such a barrel resulted with us partnering with Daniel Defense, a leading manufacturer in the industry, to bring you a Cold Hammer Forged and Salt Bath Nitrided 16 inch barrel that is lightweight with a mid-length gas system. This combination yields a durable, lightweight, quick pointing rifle that is low maintenance and will accompany you for a lifetime through the toughest of days and the most memorable adventures.

Click Here (hhttp://www.alphaops.com/daniel_defense_melonite_barrels.php?utm_source=Cal guns-11-12&utm_medium=Forum_Post&utm_content=calguns-11-21-12ttp://) To read about our methodology behind the development of these barrels

Detailed Pics Below
http://www.alphaops.com/images/dd_fsb.jpg
All Front Sight Base (FSB) versions are meant to be free floated. No hand guard plates are included.

http://www.alphaops.com/images/dd_lopro.jpg
The low profile gas block is tapper pinned and NOT a set screw or clap-on!

http://www.alphaops.com/images/A_DD_Rollmark.jpg
All products manufactured by Daniel Defense come with their 100% lifetime satisfaction guarantee against defects in materials and workmanship!

http://www.alphaops.com/images/A_DD_Chamber.jpg
The receiver extensions are ready for M4 feed Ramp upper receivers.

http://www.alphaops.com/images/A_DD_Crown.jpg
As always, MP inspected with 1/7 twist and a 1/2x28 thread pitch.

Configuration and Purchase Options - See the Exclusive Offer for Calguns Members Here! (http://www.calguns.net/calgunforum/showthread.php?t=647057)

Note: All versions (FSB & Low Profile) include a mid-length gas tube and roll pin!
All BCG Combos come with Daniel Defense Complete Bolt Carrier Group
that is MP inspected and FA rated!

Daniel Defense Melonite CHF Mid length 16"
5.56 Lightweight Barrel - w/FSB + Gas Tube
http://www.alphaops.com/images/dd_fsb.png (http://www.alphaops.com/product_info.php/danieldefensemelonitechfmidlength16556lightweightb arrelwfsbgastube-p-309)

Daniel Defense Melonite 16" 5.56 Mid length
CHF Lightweight Barrel - w/FSB + GT + BCG
http://www.alphaops.com/images/dd_fsb_bcg.png (http://www.alphaops.com/product_info.php/danieldefensemelonite16556midlengthchflightweightb arrelwfsbgtbcg-p-310)

Daniel Defense Melonite CHF Mid length 16"
5.56 Lightweight Barrel - w/LPGB + Gas Tube
http://www.alphaops.com/images/dd_lopro.png (http://www.alphaops.com/product_info.php/danieldefensemelonitechfmidlength16556lightweightb arrelwlpgbgastube-p-308)


Daniel Defense Melonite 16" 5.56 Mid length
CHF Lightweight Barrel - w/LPGB + GT + BCG
http://www.alphaops.com/images/dd_lopro_bcg.png (http://www.alphaops.com/product_info.php/danieldefensemelonite16556midlengthchflightweightb arrelwlpgbgtbcg-p-311)

Firefight
02-08-2013, 10:28 PM
Please forgive me but what does chf mean?

Zzyzx85
02-08-2013, 10:35 PM
cold hammer forged :)

AlphaOps
02-09-2013, 8:03 PM
Hello,
CHF = Cold Hammer Forged