PDA

View Full Version : ar500 silhouette targets and small ar500 gongs for sale or trade


glorified_welder
09-23-2012, 8:14 PM
I had a few of these targets proffesionally built for me using 3/8" ar500 silhouettes I purchased. All targets were professionally built by a certified welder at a metal fabrication shop. These were not built in a garage by some hobbiest. I took one out to test but my buddy who owned the land we shot on sold it so now I have no use for them. The one pictured is the one that has been shot. It is angled forward 10 degrees to reduce the risk of ricochetts. It was shot at 35-40 yards with green tip 5.56 penetrator rounds as well as a variety of steel core and non-steel core 7.62x39 rounds. It was also shot buy assorted 308 rounds at 75-80yrds. Point of impact can be seen on the target but it was not bend or deformed in anyway. I can guarantee it will handle any handgun ammo and the majority of riffle ammo. I am selling the one that has been shot for $100 and the ones that have not for $120each( discounts given if you buy more than one). That includes the silhouette the base (2x4 not included). If the base is not needed you can take $40 off the price. I am located in valencia. SORRY NO SHIPPING


I am willing to trade multiple targets for a plate carrier and/or plates, optics, marlin 30/30, ak parts kits, and reloading equipment/supllies or ammo


I can be reached via call or text at (661)312-2340


I can guarantee none of the other ar500 targets in this price range come with a stand even remotely close to this nice. Don't settle for a flimsy stand. With that said stands may have slight varience in materials used due to what the metal supply has in stock. But heavy duty quality materials will always be used. If you're worried about the exact stand you will be recievibg. I can text you pics of the exact model I have on hand.


http://i96.photobucket.com/albums/l194/661lastmanstanding/2012-09-23192446_zps9b2b0795.png


http://i96.photobucket.com/albums/l194/661lastmanstanding/2012-09-23192159_zpsaf07610f.png



http://i96.photobucket.com/albums/l194/661lastmanstanding/2012-09-23192248_zps50b7ec12.png


http://i96.photobucket.com/albums/l194/661lastmanstanding/20120923_183707_zps5f7c0c49.jpg


Updated pics of another used target.



http://i96.photobucket.com/albums/l194/661lastmanstanding/2012-12-14203441.png


Most impacts on this target are from .45 within 15 yards and .308 at 200 yards. Both only left marks on the paint. They did not indent the material at all. The small craters are from .338 lapua at 200 yards. the are approx 1/16th of an inch. that's less than 1/3 penetration. These targets are very hardy. They also stayed standing the .338 lapua was unable to know them down.


http://i96.photobucket.com/albums/l194/661lastmanstanding/2012-12-14203408.png




I also have some 3" ar500 circles 3/8" thick left over from project I had with some mining and excavation equipment. I used a few to make some swingers and have a handfull of cicle plates left. Price is $7 each

glorified_welder
09-23-2012, 8:15 PM
Reserved

glorified_welder
09-24-2012, 4:31 PM
btt

glorified_welder
09-25-2012, 3:32 PM
Btt

glorified_welder
09-26-2012, 10:41 PM
btt

glorified_welder
09-27-2012, 9:12 PM
Btt

glorified_welder
09-28-2012, 3:04 PM
Btt

glorified_welder
09-29-2012, 11:38 AM
btt. all pms answered

glorified_welder
09-30-2012, 9:38 AM
Btt

glorified_welder
10-02-2012, 8:23 PM
Btt

glorified_welder
10-03-2012, 11:41 AM
Btt

glorified_welder
10-04-2012, 5:05 PM
Btt

glorified_welder
10-05-2012, 2:11 PM
Btt

glorified_welder
10-06-2012, 11:08 AM
Btt 5 circles sold

glorified_welder
10-07-2012, 11:20 AM
Btt

glorified_welder
10-08-2012, 9:23 AM
btt

glorified_welder
10-09-2012, 5:45 PM
Btt

glorified_welder
10-10-2012, 5:51 PM
Btt

glorified_welder
10-11-2012, 1:06 PM
Btt

glorified_welder
10-12-2012, 4:24 PM
Btt

glorified_welder
10-13-2012, 10:14 AM
Btt

glorified_welder
10-14-2012, 10:10 AM
btt

glorified_welder
10-15-2012, 6:01 PM
Btt

glorified_welder
10-16-2012, 4:40 PM
Btt

glorified_welder
10-17-2012, 7:03 PM
Btt

glorified_welder
10-19-2012, 12:13 PM
Btt

glorified_welder
10-20-2012, 10:36 AM
Btt

gunbunny12
10-20-2012, 11:32 AM
Will you ship?

glorified_welder
10-21-2012, 2:43 PM
Yeah I'll ship but I doubt it'll be cheap

glorified_welder
10-22-2012, 12:56 PM
Btt

glorified_welder
10-23-2012, 7:50 PM
Btt

glorified_welder
10-24-2012, 7:45 AM
Btt

glorified_welder
10-25-2012, 9:43 AM
Btt

glorified_welder
10-26-2012, 6:11 PM
Btt

glorified_welder
10-28-2012, 2:12 PM
btt. new pics soon to come

glorified_welder
10-29-2012, 3:47 PM
Btt

glorified_welder
10-30-2012, 5:55 PM
Btt

glorified_welder
10-31-2012, 10:37 PM
Btt

glorified_welder
11-02-2012, 5:38 PM
Btt

glorified_welder
11-03-2012, 5:32 PM
btt

glorified_welder
11-04-2012, 7:54 AM
btt

glorified_welder
11-05-2012, 5:37 PM
Btt

glorified_welder
11-06-2012, 8:42 PM
btt

glorified_welder
11-07-2012, 6:44 PM
Btt

glorified_welder
11-08-2012, 7:12 PM
Btt

glorified_welder
11-08-2012, 7:12 PM
Btt

glorified_welder
11-09-2012, 10:55 PM
btt

glorified_welder
11-10-2012, 7:02 PM
Btt

glorified_welder
11-11-2012, 9:24 PM
Btt

glorified_welder
11-14-2012, 10:14 PM
Btt

Korrie
11-14-2012, 11:57 PM
Very interested in a stand. How much to ship to the San Jose area?

glorified_welder
11-15-2012, 9:39 PM
Pm'd

glorified_welder
11-16-2012, 4:54 PM
Btt

glorified_welder
11-18-2012, 9:42 PM
btt

glorified_welder
11-20-2012, 3:31 PM
Btt

glorified_welder
11-21-2012, 7:45 PM
Btt

glorified_welder
11-22-2012, 3:39 PM
Thread updated with black friday sale. Good thru sunday

glorified_welder
11-23-2012, 1:14 PM
Btt

glorified_welder
11-24-2012, 4:29 PM
Btt

kuletchi
11-25-2012, 2:28 PM
Location?

R_L_S
11-25-2012, 2:30 PM
Says Valencia in the OP.

glorified_welder
11-26-2012, 11:13 AM
Extending the sale till the end off today. Thanks to everyone who already participated

glorified_welder
11-27-2012, 9:34 PM
btt

glorified_welder
11-28-2012, 7:07 PM
Back to normal

glorified_welder
11-30-2012, 11:00 AM
Btt

glorified_welder
12-01-2012, 8:49 AM
Btt

Avedis
12-01-2012, 11:37 AM
Interested in 3 18x30 IPSC Silhouette w/ stand. Shoot me a PM

glorified_welder
12-02-2012, 11:31 AM
Btt

jctheguy
12-02-2012, 11:57 AM
Interested on the one that was shot. PM sent for possible trade.

glorified_welder
12-04-2012, 9:48 AM
Replied

glorified_welder
12-05-2012, 8:42 PM
btt

glorified_welder
12-06-2012, 3:16 PM
Btt

glorified_welder
12-07-2012, 2:56 PM
Btt

glorified_welder
12-08-2012, 9:01 PM
btt

glorified_welder
12-09-2012, 7:01 PM
Btt

glorified_welder
12-10-2012, 3:29 PM
btt

glorified_welder
12-11-2012, 4:27 PM
Btt

glorified_welder
12-12-2012, 4:47 PM
Btt

glorified_welder
12-13-2012, 5:08 PM
Btt

glorified_welder
12-14-2012, 3:32 PM
Btt

glorified_welder
12-15-2012, 10:33 AM
btt

glorified_welder
12-16-2012, 1:31 PM
Btt

glorified_welder
12-17-2012, 12:08 PM
btt. .338 lapua pics added

glorified_welder
12-18-2012, 3:23 PM
Btt

glorified_welder
12-19-2012, 4:33 PM
Btt

glorified_welder
12-21-2012, 2:59 PM
Btt

glorified_welder
12-22-2012, 10:37 AM
Btt

glorified_welder
12-25-2012, 3:23 PM
btt

glorified_welder
12-28-2012, 1:06 PM
Btt

glorified_welder
12-29-2012, 5:33 PM
Btt

glorified_welder
12-30-2012, 9:11 PM
btt

glorified_welder
01-05-2013, 1:55 PM
Btt

glorified_welder
01-07-2013, 8:01 AM
Btt

glorified_welder
01-09-2013, 9:14 PM
Btt

glorified_welder
01-13-2013, 5:55 PM
Btt

glorified_welder
01-17-2013, 8:15 PM
Btt

glorified_welder
01-18-2013, 9:51 PM
btt

glorified_welder
01-19-2013, 9:03 AM
Btt

glorified_welder
01-21-2013, 9:41 AM
Btt

glorified_welder
01-23-2013, 5:23 PM
btt

glorified_welder
02-06-2013, 5:25 PM
Btt

glorified_welder
02-15-2013, 9:19 AM
Btt

glorified_welder
02-17-2013, 10:05 AM
btt

glorified_welder
02-25-2013, 6:12 PM
Btt

glorified_welder
02-26-2013, 6:03 PM
Btt

glorified_welder
02-28-2013, 7:57 PM
btt

glorified_welder
03-01-2013, 10:36 AM
Btt

glorified_welder
03-03-2013, 10:37 AM
Btt

glorified_welder
03-04-2013, 7:18 PM
btt

glorified_welder
03-05-2013, 7:02 PM
Btt

glorified_welder
03-10-2013, 1:46 PM
Btt

chad allred
03-14-2013, 1:40 PM
Pm sent

chad allred
03-16-2013, 8:15 PM
I just received my target and am stoked!!!!perfectly done,welds,fit & finish are professional all the way...
I will be needing more.
Heck of a nice seller too btw...

HiSierra4
03-16-2013, 9:30 PM
Do the circles have a way to hang them?
Like a hole through them?
Or?

glorified_welder
03-16-2013, 10:09 PM
Yes they do

glorified_welder
03-30-2013, 7:59 PM
Btt

chad allred
03-30-2013, 8:06 PM
I shot mine at 50 yards with lots of different 556 ammo with zero damage!

glorified_welder
04-05-2013, 8:17 PM
Thanks chad

glorified_welder
05-01-2013, 1:58 PM
Btt

glorified_welder
05-03-2013, 5:47 PM
Btt

glorified_welder
05-04-2013, 6:28 PM
Btt

glorified_welder
05-07-2013, 1:02 PM
Btt

glorified_welder
05-21-2013, 7:01 PM
Btt

glorified_welder
12-15-2013, 5:42 PM
Btt

glorified_welder
12-16-2013, 12:02 PM
Btt

glorified_welder
12-18-2013, 9:54 AM
Btt

CALRaider
12-19-2013, 12:10 PM
PM Sent.

glorified_welder
12-20-2013, 4:55 PM
Bump

glorified_welder
12-21-2013, 11:01 AM
Bump

glorified_welder
12-22-2013, 4:01 PM
Bump

glorified_welder
12-23-2013, 1:27 PM
Bump

glorified_welder
12-29-2013, 12:29 PM
btt