PDA

View Full Version : F/S: Blueprints, 80% Specific, AR-15 & LR-308 DPMS Pattern & Basic Engraving Services


Dr69er
09-14-2012, 12:32 PM
Greetings - you appear to be a commercial seller. While we certainly do appreciate your products being made available to Californians, we only allow paid vendors to sell their products and services here on Calguns. Please contact bigcalidave to sort out your vendor membership. Out of courtesy, your thread will remain visible but closed, and will be reopened once your vendor status is updated. Thank you!

Hello Fellas,

We still have plenty of Blueprints for 60%-80% PCR's (DPMS LR-308 Pattern), these
Blueprints will work with and Including those for: QD-308's, TM-308, and Colfax
Forged 308's.

These are perfect for home/personal builds and for people who have access
to a basic benchtop or larger milling machine or a high quality drill press w/ a
cross slide vise combo etc.

With these Blueprints you won't need to purchase a Jig if you don't want
to, anyone with some basic blueprint reading and machining skills can pro-
duce a quality home built finished product.

Each Blueprint comes with a seperate print for drill/mill location points,
these prints are specifically designed for the home/personal builder(s).
We are working on making a Jig for the QD-308 80%'s, since no one has
yet to produce a Jig for this popular 80% PCR...

We also have Blueprints for the Mil-Spec Pattern AR-15 80% "Lowers".

Print sets are printed on ANSI size B (11" x 17") paper stock. Perfect
for the Home/Private builder.

DPMS LR-308 Pattern prints are $20 per set delivered.
AR-15 Mil-Spec Pattern prints are $18 per set delivered.

We will also be offering basic engraving service(s) for your 60% to 80%
AR-15, AR-10 and DPMS LR-308 Pattern "Lowers"...

The engraving will be $50 w/ return shipping Included to the lower 48

The "Lowers" can be either "in the white" or in a anodized state, but
must still be in a 80% (or less) form to be engraved, It will meet or
exceed ATF/BATF regulations for minimum engraving depth of .003" .
The engraving will be done with a Diamond tipped engraver
set @ a minimum .005" to .006" engraving depth. This is
one of the most difficult and teadious operation(s)
for the Home/Private Builder when completing a build.

Only basic Information is needed on your 80% build like:

Name/Company Name of the Builder.
Location where the builder finished or will be finishing the build.
"Serial Number" or a number that can be Identified as/by the builder.
A Caliber Designation or It can be listed as "Multi-Cal." .
A "Model Number" is Optional.

Of course most 80% or less PCR's don't come with selector symbols or
markings like "Fire" & "Safe", so they will be Included if your 80%
PCR does not have that feature on your 60% to 80% PCR or "Lower".

Of course the only other thing that is needed is a return mailing/shipping
address and payment from the sender.


Thanks.


http://i742.photobucket.com/albums/xx65/Doc69er/P1010266.jpg

http://i742.photobucket.com/albums/xx65/Doc69er/QD-15.jpg

Dr69er
09-16-2012, 6:41 AM
Bump

Dr69er
09-17-2012, 6:46 AM
Bump

Dr69er
09-18-2012, 7:47 AM
Bump

Dr69er
09-19-2012, 1:38 PM
Bump

Dr69er
09-21-2012, 11:56 AM
Bump

Dr69er
09-24-2012, 5:15 PM
Bump

Dr69er
09-28-2012, 9:26 AM
Bump

Dr69er
10-01-2012, 3:05 PM
Bump

Dr69er
10-05-2012, 11:03 AM
Bump

Dr69er
10-17-2012, 5:41 PM
Bump

Dr69er
10-20-2012, 1:08 PM
Bump

Dr69er
10-24-2012, 6:52 PM
Bump

cll
10-24-2012, 9:03 PM
I'll take it - set of ar15/308 manufacturing prints

Dr69er
10-27-2012, 7:42 AM
I'll take it - set of ar15/308 manufacturing prints



Thanks, PM sent.

Dr69er
10-30-2012, 12:45 PM
bump

Dr69er
11-02-2012, 5:08 PM
Bump

Dr69er
11-05-2012, 7:21 PM
Bump

Dr69er
11-09-2012, 4:31 AM
Bump

Dr69er
11-15-2012, 1:36 PM
Bump

Dr69er
11-22-2012, 7:51 PM
Bump

Dr69er
11-24-2012, 10:45 AM
Bump

Dr69er
11-27-2012, 11:25 AM
Bump

Dr69er
11-29-2012, 1:53 PM
Bump

Dr69er
12-03-2012, 6:03 PM
Bump

atdski07
12-03-2012, 6:54 PM
Any luck with that QD .308 jig??????????