View Full Version : SOLD 14.5 spikes upper with pinned dynacomp Sac, CA RARE

09-04-2012, 2:58 PM
I am selling my complete upper for $699SOLD to Calzona. I've shot less than 100 rounds through it and it's in excellent condition. It's less than 6 months old. Just so you know, this is one bad boy that is extremely hard to get a hold of. It took me almost a year to get this bad boy. Everything is manufactured by Spikes. Will come with complete upper with BCG and CH. Also has magpul ladder panels.

Magpul MBUS Gen2 sights not included. Not looking for any trades at the moment due to the fact that I'm funding another project. Located in Sacramento, CA

I will get photos up but the one provided is a 100% the same
The last photo is a factory image of the upper.


• Spike's Tactical M4 flat top*upper receiver, Machined from a 7075 T6 Mil-Spec Forging*with Mil-Spec Type III Hard coat Anodized finish, T-markings, Spike’s logo and M4 feed ramps.
• Barrel is certified MIL-B-11595E CMV.* Bolt & barrel are HPT/MPI tested, M4 barrel extension, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish.
• Lightweight (Pencil) Profile with Mid-length gas system.
• Barrel is Phosphate finished under the .625 pinned gas block.
• The M16 carriers are Chrome lined with a Mil-Spec phosphate finish.
• Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware*and Properly staked.
• HP/MP Tested Bolt, Each extractor is fitted with a Mil-Spec black*insert and Mil-Spec Viton o-ring.
• Spike's Tactical 12" BAR 4 Rail Free Floating Handguard.
• Pinned Spike's Tactical DyanComp Muzzle Break.

The Spike's Tactical 12” BAR Rail is a 1pc free floating quad-rail that’s machined from 6061-T6 Aluminum with a barrel nut machined from 7075-T6 Aluminum and finished in type III Hardcoat Anodizing on the rail and barrel nut. The 12” BAR rail weighs in at 479 grams (16.89 oz.) and has an ID of 1.79”. 

The BAR rail also features scalloping on the rails that not only saves a little bit more weight but also allows you to run this rail without any rail covers! This sounds like an outlandish claim to those who have had their hands cut up on other quad-rails that have been lovingly called “cheese graters”. The BAR also offers excellent heat ventilation, built in anti-rotation tabs to keep the rail and even the barrel nut from coming loose, and of course; sexy styling. 

But wait, there’s more! The BAR has 5 built in QD sockets (sling attachment points), allows for a continuous top rail, it’s compatible with many low profile gas blocks, and it’s made right here in the USA and backed by Spike's Tactical's LIFETIME WARRANTY!
• 1pc free float design
• Rail is Machined from 6061-T6 Aluminum
• Barrel nut is Machined from 7075-T6 Aluminum
• Type III Hardcoat Anodized Black on the rail and barrel nut
• Built in Anti-Rotation tabs
• excellent heat ventilation, and sexy styling
• Scalloped rails
• 5 Built in QD sockets (Sling attachment points)
• Rail attaches to the barrel nut w/ (8) T-20 Grade 8 Torx screws
• Continuous top rail
• Compatible with Many Low profile gas blocks
• Barrel nut works with standard USGI barrel nut wrench

Spike's Tactical Dynacomp Extreme muzzle break reduces felt recoil and helps combat muzzle climb. These muzzle breaks are Manufactured 303 Stainless Steel and feature a Melonited black finish for wear resistance from high volume shooting. Machined to be completely concentric, included threading, not taped after the fact. The ports are ball dimpled for optimal expansion of gases and heat dissipation. The Dynacomp's are also long enough to extend your 14.5" barrel to an ATF acceptable 16".

Spike's Tactical Complete 5.56 Bolt Carrier Group. Complete with Bolt Carrier, Bolt and Firing Pin, Military Spec. Heavy Phosphate Coated, and feature a properly staked gas key. BCGs are machines from Carpenter 158 Steel. Gas Keys are also hardened. HPT/MPI Bolt.
-Mil-Spec firing pin retaining pin with MIL-STD-171 phosphate finish
-Mil-Spec cam pin with MIL-STD-171 phosphate finish.
-Mil-Spec firing pin with MIL-STD-171 hard chrome finish.
-Tool steel extractor, shot peened, MIL-STD-171 phosphate finish, fitted with a Mil-Spec black extractor spring insert and Mil-Spec Viton o-ring.
-All bolts are Individually High Pressure Tested (HPT) and then Individually Magnetic Particle Inspected (MPI).
-All bolts are shot peened per the current Mil-Spec.
-Bolts have MIL-STD-171 phosphate finish inside and out.
-Bolts are CNC machined from Carpenter No. 158®.
-Carrier key is attached with Grade 8 hardware and properly staked per the Mil-Spec.
-Carrier key has MIL-STD-171 phosphate finish inside and out.
-Mil-Spec tool steel carrier key.
-Laser engraved with ST Spider logo (visable through ejection port door opening).
-Carrier has MIL-STD-171 phosphate finish inside and out
-Mil-Spec 8620 tool steel M16 bolt carrier w/shrouded firing pin.
Bolt carrier group specifications-Spike's Tactical Complete Bolt Carrier Group. Complete with Bolt Carrier, Bolt and Firing Pin. These High Quality Bolt Carrier Groups are all HBT & MP Tested, Military Spec. Heavy Phosphate Coated, and feature a properly staked gas key. BCGs are machines from Carpenter 158 Steel. Gas Keys are also hardened.


09-04-2012, 3:00 PM

09-05-2012, 9:05 AM

09-06-2012, 5:35 PM

09-07-2012, 6:23 PM
Once more

09-08-2012, 2:52 PM
Happy Saturday

09-10-2012, 5:31 PM
lots of offers but not sold yet

09-11-2012, 11:55 AM
650 this week only.. This is a sweet upper but hard to get

09-11-2012, 5:27 PM
Paypal sent!