PDA

View Full Version : Ruger 22/45 mag bumpers


plowboymetalman
09-04-2012, 7:25 AM
If you are looking for a great accessory to a already great pistol,I suggest you try these 22/45 mag bumpers. If you have any of these pistols you know what a pain it can be to get the magazines in and out of these guns. I have been using them all summer with great luck. They are black injection molded and look and work great . you can find out more info at 22/45magbumper.com .enjoy

protoman421
09-05-2012, 6:35 PM
the correct address is 2245magbumper.com MADE IN USA
http://i1240.photobucket.com/albums/gg495/protoman421/0a702603.jpg

paulxpowers
09-23-2012, 3:45 PM
the correct address is 2245magbumper.com MADE IN USA
http://i1240.photobucket.com/albums/gg495/protoman421/0a702603.jpg

Does anyone know who made those barrels?

Merc1138
09-23-2012, 3:54 PM
The one on the left is tactical solutions(can't get one in CA unless you're exempt from the handgun roster since on a 22/45 it's the entire top portion that's the gun).

The second appears to be a factory 22/45 with the barrel cut off and threaded for an adapter to use a suppressor(can't have that here either).

JTecalo
09-23-2012, 4:56 PM
thanks for the info. I ordered a few for my 22/45

marcus_bervus
09-24-2012, 11:27 AM
nice addition to the mag

JohnFLand
09-25-2012, 12:09 PM
I tried 6 mags with these bumpers in my Mark III 22/45 Hunter yesterday, and they were great -- no more digging out my mags with my thumbnail! They also helped lock in each mag firmly -- I used to have to push the rear of my standard mags up and forward quite firmly to lock them in.

Speedpower
09-25-2012, 2:38 PM
They need to make one for the standard MK III

JohnFLand
09-25-2012, 7:49 PM
See this (but it's pricey, essentially doubles mag costs): https://www.volquartsen.com/products/1081-magazine-extender-for-mkiii

For a Mark III, this is a better solution: https://www.volquartsen.com/products/878-spring-loaded-magazine-ejector-for-mkiii

JTecalo
09-27-2012, 7:06 PM
these bumpers came in the mail today and the fit right on and looked great. I'll test them out tomorrow in the wilderness here in northern OR.

Speedpower
09-29-2012, 8:24 PM
See this (but it's pricey, essentially doubles mag costs): https://www.volquartsen.com/products/1081-magazine-extender-for-mkiii

For a Mark III, this is a better solution: https://www.volquartsen.com/products/878-spring-loaded-magazine-ejector-for-mkiii

It's nice but damn expensive, the magazine ejector is nice but makes insertion of the magazine harder.

JohnFLand
09-29-2012, 11:10 PM
I don't find insertion to be harder with the ejector installed.

Hobbyist
09-30-2012, 2:54 PM
Can the mag bumpers be used to convert non-22/45 Mark 3 magazines for use in a Mark 3 22/45?