PDA

View Full Version : Gun parts (AK barrels, Witness 9mm parts kit, more to come).


nick
08-30-2012, 9:35 PM
Location: Los Angeles County - Burbank and Westside.


1. I bought this parts kit hoping that I could use it as a 9mm caliber conversion kit for my Witness (and have some spare parts on top of that). However, I have a newer large frame Witness, and looks like this one was made for the older small frame ones.

I believe this to be a complete parts kit, sans frame and magazine. However, what you see is what you get, no more, no less. It used to be a full size steel frame EAA/Tanfoglio Witness in 9mm.

If you want more pictures, or pictures of specific parts, or have other questions - PM me.

I accept Paypal as a gift (no gun words) or money orders. I'll ship USPS for $5.

Price: $200

http://www.calguns.net/calgunforum/attachment.php?attachmentid=167135&stc=1&d=1346391208

http://www.calguns.net/calgunforum/attachment.php?attachmentid=167136&stc=1&d=1346391253


2. I have 4 nitrided Yugo AK barrels for sale. These were picked from a better batch of Yugo barrels that Centerfire was selling, and then nitrided. Nitriding (a.k.a. Melonite, Isonite, etc.) is, in my opinion, a better alternative to chrome-lining, and since Yugo barrels aren't chrome-lined, I had these nitrided. Nitriding is the process of hardening the surface of the metal without altering its dimensions (as opposed to chrome-lining, which is pretty hard to get uniform). It makes steel's surface harder than chrome-lining (and all of the surfaces are treated, not just the bore, like with chrome-lining), while providing resistance to rusting, and it colors the steel deep black.

If you've seen Centerfire's Yugo barrels, you'd notice that whoever pulled them from the trunnions didn't bother removing the barrel pin first, so all of them have those gouges on the barrel shank. I had those gouges welded over and turned on these barrels before nitriding, to ensure the proper friction fit. I also had the barrel pin cut welded, so that a new one could be drilled for headspacing.

I got these in anticipation of the Yugo kits I would be buying (since they usually come with sewer pipe barrels), but I was only able to find 2 kits, and one of those actually had a decent barrel (which also got nitrided, of course). So, the remaining 4 barrels are up for grabs.

The rifling is quite decent, so is the crown, and they pass the bullet test (see the pictures), so these will make good replacements for the sewer pipe barrels your Yugo kit came with.

Price: $55 each, or $200 for all. I prefer to sell locally, but I can ship on your dime.

http://www.calguns.net/calgunforum/attachment.php?attachmentid=167197&stc=1&d=1346447842

http://www.calguns.net/calgunforum/attachment.php?attachmentid=167198&stc=1&d=1346447995

http://www.calguns.net/calgunforum/attachment.php?attachmentid=167199&stc=1&d=1346448054


I accept trades for interesting parts kits.

nick
08-31-2012, 10:05 PM
bump.

nick
09-01-2012, 10:00 AM
SOLD 3. Unknown brand 7.62x39 AK barrel (I think, it's ESS). It's new, not chrome-lined, and has the gas port drilled and handguard retainer grooves and extractor cut.

Price: $50, shipping is on your dime.

nick
09-02-2012, 10:06 AM
bump.

nick
09-03-2012, 7:23 PM
bump.

nick
09-05-2012, 9:39 PM
bump.

nick
09-07-2012, 7:45 PM
bump.

chiz
09-10-2012, 1:11 AM
I'll take the unknown brand barrel.

nick
09-11-2012, 8:33 AM
I'll take the unknown brand barrel.

Sorry, it was sold on Sat, I didn't update the listing.

nick
09-14-2012, 9:27 PM
bump.