View Full Version : Help with radlock on my LWRC

07-03-2012, 5:52 AM
I've watched countless videos instructing me to push the mag release in and then twist it (its a lower that came with a standard bullet button). The problem is I can't put the mag release far enough to clear the frame. What am I doing wrong?

07-03-2012, 8:35 AM
Short answer: Pushing only releases the mag to drop free without using a tool, this is after unscrewing it after a couple of turns. If your trying to remove the Rad lock completely your going to have to unscrew until is disassembled. Either way you don't have to push just unscrew to loosen. Hope this help some. If any other members can confirm would greatly appreciate it. But pretty sure that all it is.

07-04-2012, 7:10 AM
You need to twist the bar that comes out of the left side of the receiver when you depress the button. You may need a longer tool, like a small punch, to get it to extend far enough to unscrew.

07-04-2012, 7:24 AM
Got it. Thank you MrExel for PMing me so quickly.