PDA

View Full Version : delete


STAGE 2
05-22-2007, 3:38 PM
delete

fguerra
05-22-2007, 3:51 PM
These are PPT's only right? Are these complete frames?

Compact45
05-22-2007, 3:58 PM
Is the frame specification for series 70 or series 80 colt?

snacks
05-22-2007, 4:42 PM
Are these frames made by Colt?

marlim4
05-22-2007, 4:50 PM
Please post the answers to above questions...I am interested as well. Thanks.

brassburnz
05-22-2007, 7:32 PM
If you look at the picture, you'll see that it is a stripped frame. You'll need to add all the parts to complete the frame.

4 grip screw bushings
4 grip screws
trigger
mag catch, mag lock, mag lock spring
mainspring housing, mainspring, upper spring cap, lower spring cap, spring cap pin, mainspring housing pin
grip safety
thumb safety
hammer, hammer strut, hammer strut pin
sear
disconnector
sear pin
hammer pin
sear spring
ejector, ejector pin
plunger tube, plunger tube spring, front spring cap and rear spring cap

You'll need to pay a gunsmith to install the plunger tube ($20-30) or you can buy a tool and do it yourself ($40-80).

You might also need a gunsmith to do the trigger and safety work if you're not up to it.

Seems like a lot, but overall, you'll be building a gun with all the components you want without having to toss the original parts. I've built several 1911's from scratch. It's quite a learning experience and it' s a ton of fun.

Randy
NRA Life Member

slick_711
05-22-2007, 7:47 PM
If you look at the picture, you'll see that it is a stripped frame. You'll need to add all the parts to complete the frame.


And a slide. :D :D

m1match
05-22-2007, 8:35 PM
Could you look at the frames, identify who the manufacturer is and post them here on this thread? Numrich is a distributor and retailer of gun parts from different manufacturers, so it would be important to most buyers to identify exactly who manufactured the frames you own.

esskay
05-22-2007, 9:03 PM
These are PPT's only right? Are these complete frames?

Yes, to sell within California these would have to be PPT since frames are not on the "approved" roster.

snacks
05-22-2007, 9:13 PM
interested on what is marked on the lowers receivers. thanks

Fatcat
05-22-2007, 10:15 PM
These ".45 ACP" frames, right?

blackrifle
05-23-2007, 10:13 PM
So this is the frame you're selling? Item #979630A with a .220 radius beavertail cut?

http://www.e-gunparts.com/DisplayAd.asp?chrProductSKU=979630B&chrSuperSKU=979630&MC=

s281c
05-24-2007, 7:27 PM
Is that the actual picture of the frame or a stock photo?

Are these consecutive Serial Numbered?

Thank You