PDA

View Full Version : AR STUFF- pMag magazine - Rem 870 wrench - 1911 Mag + Misc Glock stuff (Sunnyvale CA


glock 357
05-26-2012, 7:50 PM
MORE STUFF IN THREAD#2 AND #3 (stubby 9 rd ar15 pmag) #4 (Vietnam Colt 1911 GI Mag)

ITEM[S] WILL STAY POSTED UNTIL SOLD. FIRST COME FIRST SERVE. PM ONLY AT THE TIME YOU ARE READY TO PICK IT UP. DO NOT BUMP MY THREAD. ASK THROUGH PM ONLY!

Will ship if you can direct deposit directly into my WF bank account. NO PAYPAL!


LOCAL PICKUP ONLY in Sunnyvale CA ( 7 miles north of san jose in the san francisco bay area ).
AR BCG IS SOLD!

Birchwood Caser PERMAFIN Satin Black Gun Refinishing Kit w/ Airbrush, two air cure bottles, and paint bottles. Good enough to finish 2 possibly 3 rifles. I was going to use this to refinish a 03a3 springfield sporter and SKS that I had but put the projects on hold. It was between this and duracoat but found this was a bit more suitable color for my military rifles. The kit is new I paid $50 for it. It is AIR CURE so you wont need an oven to cure it. My loss your gain $20

Here's More specs:
PERMA FIN is a single-component, water-based polyurethane resin liquid, making it an easy product to apply and clean up. No mixing of components like other 2-part coatings, and no harsh chemicals to clean up after its use. PERMA FIN has an excellent adhesion to metal firearms surfaces, but also to plastic and rubber surfaces. PERMA FIN can be applied in two ways. Apply by airbrush for best results. Can also be applied with a fine-bristled painter's brush. Apply several light coats to obtain a long lasting, durable finish on all gun metal surfaces. Best yet, no baking required; simply air cure! Use the 3 oz bottle if you have your own airbrush or as a refill for the kit.
http://i1189.photobucket.com/albums/z439/glock_357/100_1513.jpg


Midwest Industries AR 15 Long Rail Forearm Mount $10
Mounts on your stock hand guard to mount a grip and or flashight laser etc.
http://i1189.photobucket.com/albums/z439/glock_357/mine/100_1469.jpg

glock 357
05-29-2012, 11:58 AM
Got some excess stuff that I don't need that is just sitting in the box. Local pickup preffered. I'm located in Sunnyvale CA (7 miles north of san jose in the san francisco bay area )

Sinclaire AR15 Vise Block and upper latch (superb for cleaning and while working on your AR) SOLD
http://i1189.photobucket.com/albums/z439/glock_357/100_1553.jpg

Remington 870 Choke Tube Wrench $10
http://i1189.photobucket.com/albums/z439/glock_357/100_1550.jpg

$15 - Brownells Single Round Mag Follower (Details of what it is below)
If you are using the longer, heavier bullets in your AR-15, then you need a AR Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position from the lower receiver. No need to take your magazine apart! It takes only a few seconds to install the Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines.

http://i1189.photobucket.com/albums/z439/glock_357/100_1495.jpg

Parts list:
1 - Remington 700 Police Scope Mount screw plugs $4
2 - Original glock front and rear sight plastic SOLD
3 - Glock Front Sight Tool SOLD
4 - AR15 Front 4 pin Sight Tool SOLD
10 - Lee Reloading Turret Press Small Pistol Primer Seater $2
12 - AR15 Rear Upper pin removal tool $2
13 - Redding powder Measure Mounting bracket. Will also fit RCBS $6

http://i1189.photobucket.com/albums/z439/glock_357/100_13991.jpg

Mosin Nagant M44 / M38 Cleaning Rod W Accessories, M38 Bayonet (not photographed), excellent condition Sling $10
This is from a M44 that I converted using an aftermarket stock (NO THE STOCK IS NOT FOR SALE) and have this leftover. Essentially this is pretty much perfect for the mosin carbine. All parts will work on other mosins like the 91/30 with exceptions to the cleaning rod since it's too short. Great set to have for a complete mosin carbine.
http://i1189.photobucket.com/albums/z439/glock_357/100_1465.jpg
http://i1189.photobucket.com/albums/z439/glock_357/100_1466.jpg

glock 357
05-30-2012, 6:56 PM
$40 take all part nothing: 2X Pmag 20 rounders and one 10 round magazine. Both 20 round mags are blocked and epoxied. Support both .223 and 5.56 NATO rounds. Sold one of my AR carbine upper receiver so I don't need the excess mags.
http://i1189.photobucket.com/albums/z439/glock_357/100_1723.jpg

glock 357
07-11-2012, 9:38 AM
Original GI Mag $40

http://i1189.photobucket.com/albums/z439/glock_357/100_1695.jpg
http://i1189.photobucket.com/albums/z439/glock_357/100_1696.jpg
http://i1189.photobucket.com/albums/z439/glock_357/100_1697.jpg
http://i1189.photobucket.com/albums/z439/glock_357/100_1698.jpg

glock 357
07-14-2012, 11:30 AM
Bump GI Mag added

glock 357
07-16-2012, 5:48 PM
bump

glock 357
07-17-2012, 8:40 PM
bump

glock 357
07-21-2012, 6:01 PM
bump

glock 357
08-08-2012, 12:21 PM
Bump

glock 357
08-17-2012, 5:49 PM
bump still got some leftovers.........

glock 357
08-23-2012, 10:04 AM
bump