PDA

View Full Version : USGI 10/20 or ASC 10/20 mags?


Sturnovik
04-20-2012, 10:16 PM
I've been wanting to find some USGI or ASC 10/20 mags without breaking the bank. I tried exile and they were sold out. Anyone seen any? I'm hoping to find 10/20 mags that dont have that huge curved angle, I've seen a few that dont. Any ideas guys??

Sturnovik
04-21-2012, 10:35 AM
I checked exile, even there sold out. Anyone have any ideas?

Knife Edge
04-21-2012, 10:41 AM
Check out D&H. Supplier for a major name brand that has 2 letters.

t0kie
04-21-2012, 11:41 AM
I had the same needs last year & nobody has them. I posted in WTB section & another member got me some. I think the straight 20 round body with USGI grey/dry film finish gives the best ol' school look.
Post in WTB section & see. Good luck.

asgalindez
04-21-2012, 11:54 AM
If you are willing to modify the mags yourself, 44mag.com has c-products 20 rounders for $9.99 + free shipping. Don't forget to add the $1.49 per mag breakdown to rebuild kit fee.
http://www.44mag.com/product/718/223_ar15_magazines
http://www.44mag.com/product/719/223_ar15_magazines

Hoop
04-21-2012, 11:56 AM
Magpul 10/20 or get 20 rebuilds and make your own. Better than everything else I've used.

Sturnovik
04-21-2012, 12:18 PM
Yea it looked like exile had the 30 rounder ASC/DH ones. I couldn't find the darn tab to have them disassembled. Am I just missing it?

justin_5585
04-21-2012, 1:11 PM
Yea it looked like exile had the 30 rounder ASC/DH ones. I couldn't find the darn tab to have them disassembled. Am I just missing it?

Exile automatically disassembles them for free when they see the CA address.

Sturnovik
04-21-2012, 1:19 PM
Awesome! I was going to say I must be stupid since I couldn't find that button to click. I guess I should decide between DH and ASC.

Thordo
04-22-2012, 6:58 AM
Awesome! I was going to say I must be stupid since I couldn't find that button to click. I guess I should decide between DH and ASC.

Hi Sturnovik,
We just got a case of 10/20 factory blocked D&H mags. They come with our UBBT installed and are very reasonably priced.

Check them out:
http://ubbt.net/ubbt-installed-1020-maga1020.html

Thordo

Thordo
04-22-2012, 7:04 AM
I had the same needs last year & nobody has them. I posted in WTB section & another member got me some. I think the straight 20 round body with USGI grey/dry film finish gives the best ol' school look.
Post in WTB section & see. Good luck.

Hi t0kie,

We have a half case of REAL C Products mags with the grey finish that just don't sell. They are not straight though. They are curved at the bottom. PM me if you're interested in picking up some rebuild kits CHEAP!!

Thordo

Exile Machine
04-22-2012, 7:54 AM
We don't sell any pre-blocked mags, but we do have a bunch of straight-backed .223 ASC 20 rounders in stock:

https://www.exilemachine.net/shop/mag-asc-ar223-20rd-sts-blk-2021.html

And the magblocks to block 'em:

https://www.exilemachine.net/shop/magblock-magazine-block-10-20-usgi-46065.html

Exile Machine was founded by a 2009 CA escapee, so we automatically disassemble any mags > 10 rounds into rebuild kits when shipped to a CA address, Your receipt will have a line automatically printed on it in big bold type that says you bought rebuild kits:
ALL MAGAZINES OVER 10 ROUNDS SHIPPED DISASSEMBLED AS REPAIR / REBUILD PARTS KITS
This will give you a legal paper trail, should you ever find yourself in need of one.

Sturnovik
04-26-2012, 6:49 PM
Hi Sturnovik,
We just got a case of 10/20 factory blocked D&H mags. They come with our UBBT installed and are very reasonably priced.

Check them out:
http://ubbt.net/ubbt-installed-1020-maga1020.html

Thordo

Thanks budd, sorry about not getting back earlier. Forgot about my thread. I'll probally end up ordering one.


We don't sell any pre-blocked mags, but we do have a bunch of straight-backed .223 ASC 20 rounders in stock:

https://www.exilemachine.net/shop/mag-asc-ar223-20rd-sts-blk-2021.html

And the magblocks to block 'em:

https://www.exilemachine.net/shop/magblock-magazine-block-10-20-usgi-46065.html

Exile Machine was founded by a 2009 CA escapee, so we automatically disassemble any mags > 10 rounds into rebuild kits when shipped to a CA address, but if you want something on your receipt that says you bought kits, you can add this FREE item to your cart that will give you exactly the "paper trail" you desire: https://www.exilemachine.net/shop/convert-high-cap-magazine-to-ca-legal-repair-rebuild-parts-kit-46097.html

I was kinda hoping some places besides the ones mentioned already had them blocked. Either way I will seriously look at those exile.