PDA

View Full Version : Single Shot Exemption


RT13
04-19-2012, 10:20 PM
I know you guys are offering SSE for some handguns and wanna know if you will be doing this for the Hk45 or P30? Thanks.

Riflegear
04-20-2012, 8:32 AM
We're working on doing more SSE type guns. Keep an eye on the website for more availability.

shark92651
04-20-2012, 10:39 AM
We will be doing HK45, we have the pistols on order.

deviljon
04-20-2012, 3:14 PM
Patiently waiting to pick up a Dan Wesson Valor :)

cdmcdoug
04-20-2012, 3:34 PM
What about a Ruger SR1911? Do you plan on getting any of these?

RT13
04-20-2012, 4:09 PM
Sweet! Thanks Shark.

shark92651
04-21-2012, 7:08 AM
Patiently waiting to pick up a Dan Wesson Valor :)

I would order it online now. We have the conversion parts on the way for the 1911's so should be able to start the DROS as SSE in a week.

shark92651
04-21-2012, 7:13 AM
What about a Ruger SR1911? Do you plan on getting any of these?

No current plans but will run it by some people.

deviljon
04-23-2012, 6:32 AM
I would order it online now. We have the conversion parts on the way for the 1911's so should be able to start the DROS as SSE in a week.

Thanks! Still actually saving up for it, you guys have done too much damage to my wallet in the last few months.

InertiaDriven
05-02-2012, 10:28 PM
I would order it online now. We have the conversion parts on the way for the 1911's so should be able to start the DROS as SSE in a week.

I'll need to sell my 1989 Porsche 944 (who needs a 2nd car, right?) and pick up the Dan Wesson Black Valor. What a nice pistol. I compare this to an Ed Brown in terms of handling, build, and trigger pull.

ttoorrcchh
05-22-2012, 5:13 PM
Hi,

Can you do an SSE on a walther PPQ? also, when will the .40 Sig SP2022 be available again?

Thanks

daybreak
05-22-2012, 6:22 PM
Do you guys have plans to do SSE for CZs?

buymenow00
05-24-2012, 6:08 AM
Are you handling out of state transfers on SSE? Looking to order a new custom 1911 from Fusion Firearms and they will ship in SSE configuration...

Thanks.

oneway
05-24-2012, 4:38 PM
Just curious if the parts for a 1911 SSE have come in yet ? I left my number regarding a SSE about a month ago but never heard back, so was just following up.
Thanks

shark92651
05-25-2012, 3:17 PM
Just curious if the parts for a 1911 SSE have come in yet ? I left my number regarding a SSE about a month ago but never heard back, so was just following up.
Thanks

We have a couple 1911 SSE kits available now. I'm not sure what happened with your call-back so please check with us again.


Are you handling out of state transfers on SSE? Looking to order a new custom 1911 from Fusion Firearms and they will ship in SSE configuration...

Thanks.

Yes we do transfers on SSE handguns.

We do not have any current plans for CZ or Walther.

JackRydden224
06-08-2012, 8:14 AM
Let's say I want a Rock Island 1911 in 9mm which is not on the list, how does this work? As far as I know riflegear does not stock any Rock Island pistols at the moment.

shark92651
06-09-2012, 3:33 PM
Let's say I want a Rock Island 1911 in 9mm which is not on the list, how does this work? As far as I know riflegear does not stock any Rock Island pistols at the moment.

It would need a 9mm barrel at least 6" in length and a magazine block to make it single shot. I don't think it would be worth the investment for us to procure the conversion parts for this pistol, but if you ship one in to us in that configuration we would do a transfer on it for you.

0351USMC
06-13-2012, 11:56 AM
waiting PPQ,XDm and M&P Shield

buymenow00
06-14-2012, 1:27 PM
Shark - Is it possible to have a 1911 shipped to you from out of state and you can install SSE compliance parts and then transfer to me? Or, do i need to find someone else, like Table Rock Arms, to do the conversion first and then ship to you for transfer to me? I am hoping that the 1911 platform is more or less standardized these days with respect to SSE modification parts and I can avoid the 2-step process...thanks!

shark92651
06-14-2012, 3:12 PM
We aren't doing SSE conversions on guns shipped in as transfers, those are reserved for our inventory as we have a limited number of conversion kits for 1911. It will need to come in as a single-shot pistol or purchase one from our inventory.

JaeOne3345
10-05-2012, 10:49 AM
We aren't doing SSE conversions on guns shipped in as transfers, those are reserved for our inventory as we have a limited number of conversion kits for 1911. It will need to come in as a single-shot pistol or purchase one from our inventory.

What if I want a frame, and I let you guys use my Pachmayr Dominator kit during the process?

Ex: I have an STI frame sent you, when it arrives, I give you the top end of a Dominator single shot kit, you install on the frame, start DROS, and I pick up and leave with the frame/top end assembled 10 days later.

Is this feasible?

http://www.dahome.net/images/Guninventory/Dominator3.JPG

latigidyblod
10-09-2012, 10:56 AM
Let me know when you can get the Hk P30s 9mm variant 3 in SSE. As soon as you guys do I will be making a little visit to pay for it in full.

H2H
10-11-2012, 10:56 PM
how about the FNX45 in tan ?

H2H
10-11-2012, 10:56 PM
double tap

RT13
11-17-2012, 1:42 AM
I now see you guys have the HK45 but not for CA. When can I expect this to be for CA market? I'm ready to get one soon as its available.

aatruong
11-27-2012, 6:40 AM
Any ETA on the gen4 glock 21? Thank you. Andy

LBDamned
12-02-2012, 8:11 AM
We're working on doing more SSE type guns. Keep an eye on the website for more availability.

is there a particular place on the site that lists what SSE are available? I looked and couldn't find :o

Riflegear
12-02-2012, 2:58 PM
AS A GENERAL RULE PLEASE NOTE:

we don't give inventory levels out and we cannot estimate inventory in the future, as the industry is too busy and too hot right now. As a value add, we try to communicate as much as possible with you all, our valued customers, but we cannot pass along information, we ourselves cannot obtain. We simply have a situation of more demand than supply in the gun industry right now, we happen to enjoy our inventory supply, which just so happens to be better than most. As for ETA's, it's nearly impossible to give some...

that said, here is the best we can do... trust me when I say, we like selling guns, we like having buying customers like you; we will do what we can within reason to communicate our item availability, but please note the current constraints.

Re: HK45, still trying to get the parts worked out for the SSE. We DO realize many of you want them in CA.

Re: site list of SSE's, each pistol has a CA version listed in the variants below the item if there is an SSE kit/transfer available for it. As for a central list, one does not exist, but we might consider putting together something that can periodically be posted on our social media and forum presences.

Re: Glock Gen4 21; the firearm is in stock, but in order to get on the list for the SSE, you will need to make the purchase of the firearm, to start the process to get a kit assigned to you. The process could be up to 30 days in an extreme case...based on the DROS rules. Many times, people find that they get to DROS their SSE CA version sooner rather than later, it all depends on how many kits we have for the guns (we don't publicize inventory levels or kit numbers, sorry). Best bet: buy one on the website, then wait for a Riflegear representative to contact you to come in for the DROS process, it will probably be faster than you think.

Re: FNX45, there aren't immediate plans to SSE this; for several reasons, mostly demand and cost, but that doesn't mean it's an impossibility in the future. FN guns are hit and miss, for instance we have decent supplies of certain ones, but cannot get a hold of others, depending on the manufacturing cycles. I personally agree that the FNX45 is a cool gun, and one I'd like to see in an SSE, but demand and cost must be in line with rationale too; currently it is not.

Re: P30 HK, we may or may not eventually SSE this pistol, but if current indications on supply from HK are any measure of availability, then it will be a while into the future. We simply can't get concrete timelines on that pistol. We will let the information out on our social media channels and through our forums when we DO have new information.

Hope this helps.

LBDamned
12-02-2012, 3:27 PM
awesome - thanks for that detailed response!

Saym14
12-03-2012, 5:21 PM
We will be doing HK45, we have the pistols on order.

how about the Walther PPQ ?

Riflegear
12-03-2012, 11:00 PM
Saym-- Re: Walther PPQ, we don't currently stock the gun, so it would be a while if at all for that one, unfortunately. Now, we may start looking at a stocking dealer program, as we are constantly expanding our lineup, 2013 will see us add several manufacturers to our mix. IF that gun is part of the new programs we get involved in, then it's quite possible we will SSE it. Now, that said, the timeline is probably much longer than you prefer to wait...

WE do try our best to take new and interesting guns into our inventory, and certainly we want to take care of all of our customers, but it's all a matter of time, luck and market behavior as to which guns get the special treatment. We will definitely keep you posted on such actions through social media and calguns, etc.

If you get onto our facebook page or twitter, we occasionally test the market as it were with questions about guns and inventory we should be carrying, that may be a perfect place to drum up some other supporters on the PPQ.

RT13
12-05-2012, 9:35 AM
On the HK45 CA availability, are we talking weeks or month away here before it is ready to be sold to us? Reason I ask, I have some funds right now for one and do want one. But there is another gun that I can get now and am on the fence if I should hold n save that money for the HK45 or not. Afraid to spend it now only to find out soon after that the HK is available and I'm left fund less. This scenario has happened to me a lot that's why, lol.

Riflegear
12-05-2012, 11:34 AM
Firstly, I promise you guys will be among the very first to hear of it when we get that gun ready to go, we enjoy working with the Calguns community very much.

I highly doubt we would be able to get the full project done on the HK45 in the next three weeks. The work load on all facets of the gun industry right now, are such that it's basically taking orders and shipping/delivering guns currently, there are LOTS of orders for items currently, and resources are being used to ensure we can ship guns and service customers the right way. I think you are safe for the next better part of a month, if not more. If I am wrong, I will do what I can to alert you so you can know early on, but I am pretty confident you've got at least 3 weeks.

DvlFig
12-11-2012, 2:28 PM
Walther PPQ, we don't currently stock the gun, so it would be a while if at all for that one, unfortunately.

Dang it, just sent you guys an email about that... :(

UteDawg
12-23-2012, 12:01 PM
+1 on the FNP or FNX 45 SSE. Please?