PDA

View Full Version : Sig 522 w/ Bushnell TRS-25 - What Riser?!


beedoublejay
04-16-2012, 12:41 PM
I recently bought a Sig Sauer 522, planning on using a Bushnell TRS-25 redd dot. I sent it in to Sig and had them install the factory iron sights. When I got the gun back I mounted the TRS-25 and it obstructs the factory sights when mounted (too low). I went to a local shop and test fitted a 1/2 inch riser, well the riser is a little too high and doesnt line up properly (too tall). I looked online for a 1/4 inch picatinny riser which should work perfect but I could not find one.

My question is....

A. Has anyone else had this problem? What was your solution?

B. If there is no 1/4 inch riser available, what red dot will line up with the factory Sig sights?


TIY

jchen76@gmail.com
04-17-2012, 7:26 PM
My sig 556, I used these http://yhm.net/index.php?main_page=index&cPath=8

for my aimpoint micro. I still could cowitness with the stock sights.

beedoublejay
04-17-2012, 7:54 PM
My sig 556, I used these http://yhm.net/index.php?main_page=index&cPath=8

for my aimpoint micro. I still could cowitness with the stock sights.

Which part # did you use?

jchen76@gmail.com
04-17-2012, 8:32 PM
The mini riser series.
http://yhm.net/index.php?main_page=product_info&cPath=2_8&products_id=128

jchen76@gmail.com
04-17-2012, 8:32 PM
--disregard

jjnavarro
04-18-2012, 7:37 AM
I recently bought the Primary Arms multi-reticle red dot.
There's an option to add a 522/566 height mount for it. Great co-witness with that setup.