PDA

View Full Version : Archangel Sparta with a 10/22


defcon
04-12-2012, 10:35 PM
2EOfbZKqgtk

Bought a Archangel Sparta for $170 and gutted it out to fit the 10/22

It's about 90% done. It got cold outside so I had to call it a day.
That's why the trigger is sitting half way down.
It needs about another hour of dremeling and the trigger should sit properly.

Right now the fitment is really tight.

I'm using a Marauder G36 magazine and fake silencer.
Added side rails and bottom rails for the AFG

http://farm8.staticflickr.com/7133/6926772278_39b4f132ee_c.jpg (http://www.flickr.com/photos/defcon008/6926772278/)
_MG_0528 (http://www.flickr.com/photos/defcon008/6926772278/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5072/7072849977_f5beea3aa4_c.jpg (http://www.flickr.com/photos/defcon008/7072849977/)
_MG_0531 (http://www.flickr.com/photos/defcon008/7072849977/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5195/6926772390_0dd78d7b26_c.jpg (http://www.flickr.com/photos/defcon008/6926772390/)
_MG_0533 (http://www.flickr.com/photos/defcon008/6926772390/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5346/6926772422_2d6eed2b74_c.jpg (http://www.flickr.com/photos/defcon008/6926772422/)
_MG_0535 (http://www.flickr.com/photos/defcon008/6926772422/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5112/7072850057_ec62447caf_c.jpg (http://www.flickr.com/photos/defcon008/7072850057/)
_MG_0537 (http://www.flickr.com/photos/defcon008/7072850057/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr


http://farm8.staticflickr.com/7227/6926772464_2caa5a4558_c.jpg (http://www.flickr.com/photos/defcon008/6926772464/)
_MG_0539 (http://www.flickr.com/photos/defcon008/6926772464/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

chaco
04-18-2012, 2:54 PM
sweet, archangel should take a look at this and make a kit

defcon
04-18-2012, 2:57 PM
thanks,

if you have a dremel or a mill, its pretty easy to just cut away until your receiver/action fits all the way down.

if i can finish today, ill take some new pics tonight.

next up is the Archangel M1A / JAE replica kit for the 10/22

the86d
04-18-2012, 3:00 PM
You should go into production! REALLY!

defcon
04-18-2012, 3:07 PM
You should go into production! REALLY!

thanks but i really cant. also i wouldnt do it with these airsoft stocks.

i would love to create my "own" cool stocks/designs for the 10/22 and Marlins and have someone else do the CNC machining and production but i think its too much trouble. i know there's CNC shops around here in Los Angeles that can take on small jobs but i wouldnt know where to start because they require some CAD file or 3D design? also wouldnt i need permission from ATF and DOJ to produce aftermarket dress up kits? then there's capital resources that i dont have. also my wife would kill me. hehe

it would be cool to do these for a living.

edit: if i were to do this, id follow the archangel method of using polymer/rubber materials from a mold. it seems like it would be cheaper and easier to reproduce. i have a friend who can design and sculpt.



:thumbsup:

emsalex
04-18-2012, 4:32 PM
why not get the archangel kit made for the 10/22 ? it would fit, and you would not see the whole receiver.

not hating just wondering ( also any one who says haters sounds like a 15 year old on jerry springer)

defcon
04-18-2012, 5:08 PM
why not get the archangel kit made for the 10/22 ? it would fit, and you would not see the whole receiver.

not hating just wondering ( also any one who says haters sounds like a 15 year old on jerry springer)

i already have the marauder kit for the 10/22

defcon
04-18-2012, 10:19 PM
All done.

RsgQ_ihHsUg

http://farm6.staticflickr.com/5350/6946493008_19fedff3a7_b.jpg (http://www.flickr.com/photos/defcon008/6946493008/)
_MG_1091 (http://www.flickr.com/photos/defcon008/6946493008/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5323/7092562903_86499231b5_b.jpg (http://www.flickr.com/photos/defcon008/7092562903/)
_MG_1092 (http://www.flickr.com/photos/defcon008/7092562903/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm8.staticflickr.com/7233/6946492956_6ea2684886_b.jpg (http://www.flickr.com/photos/defcon008/6946492956/)
_MG_1094 (http://www.flickr.com/photos/defcon008/6946492956/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm8.staticflickr.com/7124/6946492906_8d13a167f2_b.jpg (http://www.flickr.com/photos/defcon008/6946492906/)
_MG_1095 (http://www.flickr.com/photos/defcon008/6946492906/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm8.staticflickr.com/7230/7092562843_58f7f26c87_b.jpg (http://www.flickr.com/photos/defcon008/7092562843/)
_MG_1096 (http://www.flickr.com/photos/defcon008/7092562843/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

http://farm6.staticflickr.com/5457/6946492856_0e7a8753bb_b.jpg (http://www.flickr.com/photos/defcon008/6946492856/)
_MG_1097 (http://www.flickr.com/photos/defcon008/6946492856/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

defcon
04-18-2012, 10:19 PM
http://farm6.staticflickr.com/5198/6946492808_ebdd805cda_b.jpg (http://www.flickr.com/photos/defcon008/6946492808/)
_MG_1098 (http://www.flickr.com/photos/defcon008/6946492808/) by defconskylude (http://www.flickr.com/people/defcon008/), on Flickr

emsalex
04-19-2012, 9:09 AM
gotcha, i was thinking one of thesehttp://img30.imageshack.us/img30/8553/p1010119.jpg (http://imageshack.us/photo/my-images/30/p1010119.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

defcon
04-19-2012, 9:11 AM
i didnt get that version because i already have a Spikes AR15

emsalex
04-19-2012, 11:41 AM
Makes sense, any plans to fill in around the ruger receiver. Maybe a thin plastic cover of some sort.

defcon
04-19-2012, 11:46 AM
Makes sense, any plans to fill in around the ruger receiver. Maybe a thin plastic cover of some sort.

yea i have steel epoxy putty and can mold it around the gaps and just paint it with black plasti dip

defcon
07-10-2012, 10:14 PM
Updated video. 10/22 is safely secured.

ready for range time.

QkMyUSRW15I